• Journal of the Korean Ceramic Society
• /
• v.45 no.12
• /
• pp.839-844
• /
• 2008

$TiO_2$ is an environment-friendly semiconducting material, and it has photocatalytic and hydrophilic effect. There are a lot of reports on the photocatalytic characteristics of $TiO_2$, such as organic pollutants resolving, anti-bacterial, and self-purification material. In this paper, $TiO_2$ micron-sized powders were deposited on the glass by room temperature powder spray in vacuum process, so called aerosol deposition (AD), and nano-grained $TiO_2$ photocatalytic thin films were fabricated. The thickness of the films were controlled by changing the number of deposition cycle. Morphologies and characteristics of the AD-$TiO_2$ thin films were examined by SEM, TEM, XRD, and UV-Visible Spectrophotometer. As the thickness of $TiO_2$ films increased, surface roughness increased. By this increment, the reaction area between film and pollutant was enlarged, resulting in better photocatalytic property.

• The Journal of Advanced Prosthodontics
• /
• v.10 no.5
• /
• pp.374-380
• /
• 2018

PURPOSE. The effect of silica-based glass-ceramic liners on the tensile bond strength between zirconia and resin-based luting agent was evaluated and compared with the effect of 10-methacryloyloxydecyl dihydrogen phosphate (MDP)-containing primers. MATERIALS AND METHODS. Titanium abutments and zirconia crowns (n = 60) were fabricated, and the adhesive surfaces of the specimens were treated by airborne-particle abrasion. The specimens were divided into 5 groups based on surface treatment: a control group, 2 primer groups (MP: Monobond Plus; ZP: Z Prime Plus), and 2 liner groups (PL: P-containing Liner; PFL: P-free Liner). All specimens were cemented with self-adhesive resin-based luting agent. After 24-hour water storage and thermocycling (5,000 cycles, $5^{\circ}C/55^{\circ}C$), the tensile bond strength was measured using a universal testing machine. Failure mode analysis and elemental analysis on the bonding interface were performed. The data were analyzed using Kruskal-Wallis test, Dunn's post hoc test, and Fisher's exact test. RESULTS. The liner groups and primer groups showed significantly higher tensile bond strengths than that of the control group (P<.05). PFL showed a significantly higher tensile bond strength than the primer groups (P<.05). The percentage of mixed failure was higher in the primer groups than in the control group (P<.001), and all the specimens showed mixed failure in the liner groups (P<.001). A chemical reaction area was observed at the bonding interface between zirconia and liner. CONCLUSION. The application of liner significantly increased the tensile bond strength between zirconia and resin-based luting agent. PFL was more effective than MDP-containing primers in improving the tensile bond strength with the resin-based luting agent.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.5
• /
• pp.620-628
• /
• 1996

To avoid the self-agglutination of Staphylococcus aureus sensitized with rabbit antibody in the absence of antigen, we determined the optimum concentration of rabbit antibody for sensitization. It was analyzed by using three different kinds of S. aureus strains at various concentraions of antibody. The optimized coagglutination test using the S. aureus sensitized with rabbit antibody was applied to the diagnosis of edwardsiellosis in field and in laboratory. The presence of E. tarda as low as $10\;{\mu}g/ml$ was detected by this method. Moreover, it showed good coagglutination results against several different forms of antigens such as FKC, EDTA or heat extracted antigen of E. tarda. E. tarda strains, isolated from the flounders suffering from edwardsiellosis in fields, showed some cross-reactions to the E. tarda 219 analyzed by both agglutination and coagglutination test with rabbit anti-E, tarda 219 antibody. The degree of cross-reactions analyzed was enough to apply the coagglutination test for the diagnosis of edwardsiellosis in field. Thus, even 1,000 fold diluted tissue homogenate of infected flounder naturally contained enough E. tarda as an antigen to show good coagglutination with S. aueus sensitized with rabbit anti-E, tarda 219 antibody. The successful application of this method to the homogenate and heat extract of tissues from naturally or artificially infected flounder or tilapia preyed that coagglutination test was a simple and rapid reliable dignostic technique suitable for using in laboratory and field without any special equipments.

• Korean Journal of Community Nutrition
• /
• v.3 no.1
• /
• pp.76-93
• /
• 1998

Three hundred sixty-two(male 131, female 231) elderly aged over 65 in Chungb- uk area were interviewed to determine the disease states and drug usage patterns. The prebalence of disease was 78% and women reported more chronic diseases(83%) than men(71%). Elderly who live with spouse and have an occupation have a lower rate of disease. Average number of diseases of the elderly was $1.8\pm{1.1}$, and women$(2.1\pm{1.3)}$ have significantly higher average number of diseases than that of men$(1.4\pm{0.7)}$. Also the elderly in urban areas$(2.1\pm{1.4)}$ have significantly higher number of diseases than that of the elderly in rural areas$(1.6\pm{0.9)}$. Arthritis, hypertension, cardiovascular and gastric diseases were the most frequently listed chronic diseases in order for both men and women. Anemia and fracture of bone were relatively higher in women than in men. Particularly, the arthritis of the urban elderly have a rate of 1.5 times higher than that of the rural elderly. Fifty-two percent of the elderly were currently using drugs ; among drug users 71.2% used prescription drugs and 20.5% used nonprescription drugs. The average number taken per person was 2.1$\pm$1.4 and there was no sex or age difference. However, the elderly in rural areas $(2.7\pm{1.7)}$ consumed a significantly higher number of drugs than those in urban areas$(1.7\pm{0.7)}$. The average number of prescripti- on drugs taken was 2.0$\pm$1.4 while the average of nonprescription drugs taken was $(1.3\pm{0.6)}$. Analgesics and antihypertensive drugs were most commonly used. Vitamin and analgesics were the most frequently used self-prescribed drugs. It was noted that potential adverse drug interaction by concominant drug consumption for arthritis and antihypensive drug, abuse of digestants and antiacid without treatment of the underlying disease, and misuse of quick-acting bowel medications were problematic for the elderly. In addition drugs used for the elderly have some adverse effect on the digestive system. The types and composition of drugs used by the elderly were identified and presented. Medication compliance was poor and 13.5% reported adverse reactions such as edema, heartburn, nausea, and difficulty with eating. Seventeen percent of the elderly obtained drugs arranged by those other than medical staff. Also, even among those elderly who obtained drugs prescribed by a doctor, 69.1% of subjects had not receive instruction about potential adverse reactions. These results suggest that nutritional problems related to drug usage might exist and so dietitians, either individually or as members of health teams, need to have a better understanding of drug-nutrient interaction and closer supervision, and drug information/education service should therefore be provided to prevent or minimize adverse drug reaction in elderly users of medication.

• Horticultural Science & Technology
• /
• v.32 no.6
• /
• pp.912-916
• /
• 2014

Japanese apricot (Prunus mume Siebold and Zucc.) is a deciduous tree of the family Rosaceae, and it has long been used as a folk remedy for cough and dyspepsia. A new cultivar 'Okjoo' was developed from a cross between 'Gyokuei' and 'Rinsyu' carried out at the National Institute of Horticultural & Herbal Science in 1993. It w as s elected for good shape, large size and high yield capacity in 2006, and then it was granted official patent No. 4556 in 2013. It blooms 4 days and 2 days earlier than 'Gyokuei' and 'Rinsyu', respectively. Its flower petal color is pink, and the pollen amount is negligible. Its S-genotype, determined using Polymerase Chain Reaction with a S-RNase gene-specific primer pair, is $S_3S_6$. The average optimum harvest time of 'Okjoo' is late June. The fruit is round in shape and its suture is shallow. Average fruit weight is 18.5 g, and it contains total soluble solids $7.66^{\circ}Brix$ and titratable acidity at 4.81%. Fruit skin color is green. Sometimes only the light side of the fruits seems to develop blush. The incidence levels of scab (Cladosporium carpophilum Thumen) and bacterial shot hole (Xanthomonas arboricola pv. Pruni) are quite low. Consequently, 'Okjoo' seems to be a promising new cultivar for Japanese apricot growers.

• Applied Chemistry for Engineering
• /
• v.25 no.2
• /
• pp.161-166
• /
• 2014

In this study, effects of pyrite ($FeS_2$) particle sizes on the electrochemical characteristics of thermal batteries are investigated using unit cells made of pulverized pyrite by ball-milling. At $450^{\circ}C$ unit cell discharge test, the electrochemical capacity of $1.46{\mu}m$ pyrite-cell largely increases compared to $98.4{\mu}m$ pyrite-cell, and their internal resistances also decrease. These results are attributed to the increase in the active reaction area of pyrite by ball milling. However, at $500^{\circ}C$ unit cell discharge test, a $1.46{\mu}m$ pyrite cell shows lower internal resistance than that of $98.4{\mu}m$ pyrite cell only at Z-phase region ($FeS_2{\rightarrow}Li_3Fe_2S_4$). After that, a $1.46{\mu}m$ pyrite cell shows a decrease in the cell voltage and an rapid increase of the internal resistance in J-phase region ($Li_3Fe_2S_4{\rightarrow}LiFe_2S_4$) is observed compared to those of $98.4{\mu}m$ pyrite cell. It can be concluded that at the higher temperature, the thermally unstable pulverized pyrite is decomposed thermally as well as self discharged, simultaneously, which causes the higher resistance and lower capacity at $500^{\circ}C$ in J-phase than that of $98.4{\mu}m$ pyrite cell.

• Fire Science and Engineering
• /
• v.31 no.6
• /
• pp.23-32
• /
• 2017

Foam block, popularized as the self-interior goods, is susceptible to fire since the main material is the polyethylene flammable synthetic resin. However, it is widely used in homes, offices, and multi-use facilities. In order to understand the fire characteristics of the foam block, two kinds of foam blocks sold in the market (non-fire retardant and fire retardant) were evaluated according to standard of KS F 5660-1 (Reaction to fire test). In addition, the hazard analysis of the gas generated by the combustion of the specimen was performed using the FTIR gas analyzer. The cone calorimeter test showed that the ignition and flame combustion of both two specimens were burned as soon as the radiant heat blocking device was removed, and it was confirmed that the flame could become a rapid propagation factor during the fire. The analysis of the combustion gas through the FTIR gas analyzer showed that both the carbon dioxide and carbon monoxide classified as the common combustion gases and the acrolein, ammonia, and hydrogen cyanide causing serious damage to the human body were detected substantially. This study showed that a foam block product has high ignitionability and generates toxic gases. Hence, it is urgently required to establish the standards used for properly classifying the combustion characteristics of the material on the basis of the use conditions of a foam block product and to prepare the standards on the purpose of use.

• Archives of Plastic Surgery
• /
• v.35 no.4
• /
• pp.385-392
• /
• 2008

Purpose: The most effective methods of harvesting, preparing, and injecting autologous fat grafts have been inconsistent and conflicting. With its limitation as resorption in fat grafting, handling various techniques affect adipocyte survival, and is crucial to optimizing its long-term survival. To improve graft survival, re-implantation of cryopreserved adipocytes was developed. In addition, adipocytes do not induce immune rejection in response to non-self lymphocytes in a mixed lymphocyte reaction. The purpose of this study is to analyze the changes in cryopreserved adipocytes so as to determine the most efficient long-term storage period, and to analyze the changes in cryopreserved allografted adipocytes so as to determine the efficacy of cryopreserved adipocytes allografting. Methods: Fat tissues were harvested from the inguinal and retroperitoneal fat pad of mice. After the centrifugation of the harvested fat tissues, they were disintegrated with collagenase. The adipocytes were obtained by centrifugation of the disintegrated fat tissues. The adipocytes were treated as follows: (1) They were examined for weight and then frozen at $-20^{\circ}C$(n=25). For four months, each five frozen samples were taken and examined for weight and histologic changes in the 1st week, the 1st month, the 2nd month, the 3rd month, and the 4th month, respectively. (2) The adipocytes were immediately frozen at $-20^{\circ}C$(n=125). For four months, five frozen samples were taken, and allografted in the same time period as above. Finally, for four months, five cryopreserved allografted adipocytes were taken and examined for histologic changes in the same time period as above. Results: (1) Significant weight changes and histologic findings with inflammatory and destructive changes were observed in the cryopreserved adipocytes in three months. (2) Significant fat necrotic changes in the histologic changes with Hematoxylin and eosin stain were observed in the cryopreserved allografted adipocytes since the first week, independent of the freezing period. Conclusion: The study results show that the adipocytes that were cryopreserved for more than three months underwent obvious weight reductions and necrotic changes, and the adipocytes that were allografted without freezing were viable for four months, but the cryopreserved allografted adipocytes had obvious necrotic changes since the first week regardless of the freezing period.

• Journal of Energy Engineering
• /
• v.26 no.3
• /
• pp.78-89
• /
• 2017

Spontaneous combustion propensity of various coals of carbonization grade as a pulverized fuel of coal fired power plant has been tested from an initial temperature of $25^{\circ}C$ to $600^{\circ}C$ by heated in an oven with air to analyze an self oxidation starting temperature. This tests produce a CPT(Cross Point Temperature), IT(Ignition temperature) and CPS(Cross Point Slope) by calculated as the slope of time taken a rapid exothermic oxidation reaction at CPT base. CPS show a carbonization rank dependence, whereby wood pellet has the highest propensity to spontaneous combustion of $20.995^{\circ}C/min$. A subbituminous KIDECO coal shows an CPS values of $15.370^{\circ}C/min$ whereas it of pet coke of the highest carbonization rank has $20.950^{\circ}C/min$. The nature of this trend is most likely a concentration of volatile matter and oxygen functional groups of coal surface that governs the available component for oxidation as well as surface area of fuel char, and constant pressure molar heat.

• Applied Chemistry for Engineering
• /
• v.7 no.3
• /
• pp.588-596
• /
• 1996

The optimum conditions of the 1st and 2nd distillation had been investigated to obtaine a high quality monomeric MDI and fire reactive polymeric MDI by purification of crude MDI. Effect of additives on the monomeric MDI's color change, dimerization and the reactivity of polymeric MDI with standard polyol system has been tested. When the monomeric MDI yield is approximately 32%, 4,4'-MDI content is above 98% in the monomeric MDI at the 1st distillation. When the separation ratio of initial portion and residue percentage, reflux ratio are set at respectively, approximately 20wt%, 9wt%, above 2 in order to minimize the content of 2,4'-MDI in monomeric MDI, the freezing point of final distilled monomeric MDI is above $38.4^{\circ}C$. Since the monomeric MDI is inherently unstable in the room condition, monomeric MDI easily changes it's color and conducts self-polymerization reaction. To increase the stability of monomeric MDI, the composition of antioxidant, which is composed of phenolic 1st antioxidant, phosphorus 2nd antioxidant, UV absorbent and Hindered amine light stabilizer are used, and benzoyl chloride as antipolymerization agent test are that APHA color is less than 20, dimer content is remained less than 0.36wt% after 45 days storage of monomeric MDI.