• Horticultural Science & Technology
• /
• v.29 no.5
• /
• pp.420-432
• /
• 2011

Population dynamics of greenhouse whitefly, Trialeurodes vaporariorum (Westwood), were modeled and simulated to compare the temperature effects of air and tomato leaf inside greenhouse using DYMEX model simulator (pre-programed module based simulation program developed by CSIRO, Australia). The DYMEX model simulator consisted of temperature dependent development and oviposition modules. The normalized cumulative frequency distributions of the developmental period for immature and oviposition frequency rate and survival rate for adult of greenhouse whitefly were fitted to two-parameter Weibull function. Leaf temperature on reversed side of cherry tomato leafs (Lycopersicon esculentum cv. Koko) was monitored according to three tomato plant positions (top, > 1.6 m above the ground level; middle, 0.9 - 1.2 m; bottom, 0.3 - 0.5 m) using an infrared temperature gun. Air temperature was monitored at same three positions using a Hobo self-contained temperature logger. The leaf temperatures from three plant positions were described as a function of the air temperatures with 3-parameter exponential and sigmoidal models. Data sets of observed air temperature and predicted leaf temperatures were prepared, and incorporated into the DYMEX simulator to compare the effects of air and leaf temperature on population dynamics of greenhouse whitefly. The number of greenhouse whitefly immatures was counted by visual inspection in three tomato plant positions to verify the performance of DYMEX simulation in cherry tomato greenhouse where air and leaf temperatures were monitored. The egg stage of greenhouse whitefly was not counted due to its small size. A significant positive correlation between the observed and the predicted numbers of immature and adults were found when the leaf temperatures were incorporated into DYMEX simulation, but no significant correlation was observed with the air temperatures. This study demonstrated that the population dynamics of greenhouse whitefly was affected greatly by the leaf temperatures, rather than air temperatures, and thus the leaf surface temperature should be considered for management of greenhouse whitefly in cherry tomato grown in greenhouses.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.9
• /
• pp.717-722
• /
• 2001

This paper presents a methodology on the backward path tracking control of a trailer type robot which consists of two parts: a tractor and a trailer. It is difficult to control the motion of a trailer vehicle since its dynamics is non-holonomic. Therefore, in this paper, the modeling and parameter estimation of the system using a real-coded genetic algorithm(RCGA) is proposed and a backward path tracking control algorithm is then obtained based on the linearized model. Experimental results verify the effectiveness of the proposed method.

• The Korean Nurse
• /
• v.34 no.3
• /
• pp.85-98
• /
• 1995

The purpose of this study is to provide basic data regarding effective learning opportunities in childbirth education classes. Also analysis of the data indicates the optimum conditions for the welfare and improvements in the promotion of health in childbearing mothers. The results of this study are as follows; 1) The average age of the subjects in this study was 30.6 years and the total number of subjects was 58 pregnant women. The average number of children was one and 84.5% of the subjects were unemployed even though 63.8% of them held over bachelor's degrees. It was found that 22.4% of the subjects were living in an extended family. Also 61.5% of them were living with parents-in-law. The number of pregnancies were calssified as one, two, or three to nine times with the percentages of 58.7%, 22.4% and 18.9%, respectively. Further, 72.4% of the subjects had no abortion experience and 15.5% had one aborion experience. While 89.7% of the subjects planned to feed their babies with breastmilk, mixed feeding were used by only 22.4% of the sample. These data were collected at about 6 months after delivery. Thus one can see that a low rate of breastfeeding was common. 2) The length of one period of childbirth education is four weeks. It was found that 36.2% of the subjects participated in childbirth education only once, where as 13.8% participated four times and 19% of the subjects participated in this class more than four times. pregnant at least once. Further, 75.9% of the participants were participated in this education through their own will. Their motivation for participation developed through information, advertisement and posters which contained information on childbirth education. Those with unplanned pregnancies 92.9% participated after a suggestion by the nurses. The number of participants in terms of percentage according to the childbirth education contents can be classified as following. The most active participation was shown in preparation of delivery(77.6%), postpartrm management(56.9%) fetal development(37.6%) and physiology of pregnancy(17.2%). It was found that 75.9% of the subjects were willing to participate again if they were given a chance. The reason can be summarized as following: The content of the education is very helpful(47.7%). Scientific knowledge can be obtained through this program(20.5%). Participation helps in achieving psychological stability(9.1%). Participation enables one to establish a friendly relationship with other participants(6.8%) of the sample. 24.1% of the participants did not want to participate again. The reasons can be as following: They do not want another baby(42.9%). The first paricipation in childbirth education gave enough knowledge about childbirth(21.4%). Another reason for not want to participate again was because they had a cesarean birth(14.3%). Only 7.1% of them responded with a negative view. A response that they do not need childbirth education after their operation can be traced back to the general belief that childbirth education is the place where one prepares for natural birth through the Lamaze breathing technique. Of the subjects, 91.4% suggested that this program could be recommended to other childbearing mothers, because this program gave educational content along with psychological stability for childbearing women. Of the subjects 41.4% did not see any efforts towards the welfare of the baby, where as 88.2% did. Among the subjects 58.6% made some effort to eliminate the discomfort of labor by breathing and imagination and breathing and walking. Further 41.7% of the 24 subjects did not do anything toward the welfare of the baby, because they did have a cesarean section so that they didn't have a chance even though they had been educated about childbirth. Also 33.3% of the subjects did not do anything toward the welfare of the baby, because they lacked a willingness. After leaving the hospital, only 75.9% of the subjects did some exercises. The subjects who tried participate this program with their husband accounted for 20.7% of the sample. Interviewing with the subjects solved some of the uneasiness and. fear of delivery, increased self-confidence in parenting and active coping in the delivery process.

• Journal of Korean Home Economics Education Association
• /
• v.29 no.2
• /
• pp.23-39
• /
• 2017

The Purpose of this study is to present the basic data for selecting and improving the safety education contents which help practically middle school students through analysis of contents of safety education in 'field of home life' of 2009 revised middle school textbooks. The subjects of analysis are 12 types of middle school textbooks: in total 24 books written by 12 publishers in terms of the revised curriculum in 2009. The analysis criteria is developed by the researcher referring to preceding studies regarding safety education based on the seventh safety education standard presented by the Ministry of Education (2015). With such analysis criteria, all words related to the contents of the safety education of analysis criteria were extracted from each textbook, such as words directly mentioned as 'safety', words mean as 'psychological safety' and 'happy life', words related to 'attention', 'note', 'stability' etc. Under the analytic frame of safety education contents according to a home economics textbook, content analysis method was used for producing the frequency and percent of those words. The textbook analysis shows that the number of pages regarding safety education is 336.3 pages, as 9.8% in total 3,412 pages of 12 types of technology and home economics textbooks. As following the analysis of each textbook volume of the proportion in the contents related to safety education, 224.9 pages are on the first volume and 111.9 pages are on the second volume. As grades increase from year one to year three, the proportion of safety education in home economics textbooks is decreased. The highest number of safety education contents unit is 'Self-management of youth' which includes three parts of safety education. In the case of a unit for emphasizing practice, experience and practical exercise such as 'Life of youth' and 'Practice of eco-living', safety education content in the area of 'life safety' are mostly contained. Safety accidents related to the most student experienced, Household accidents (1.4%) and experiment or practice accidents (0.3%) are presented in a low figure. The contents of universal housing and school violence are duplicated on first and second volume of text. The most presented safety education content in the 12 types of textbooks are proper sexual attitude, dietary problems, family conflict and food choice. The least common contents are dangerous drugs, family welfare, internet addiction and industrial accident compensation insurance. As this study is to analyze 12 textbooks developed in 2009 revision curriculum, it is necessary to compare it with the textbook written by the revised curriculum in 2015 and to clarify the contents system of safety education and to avoid duplication of contents. In addition, it is necessary to develop and distribute a safety education program that can support textbooks.

• Korean journal of applied entomology
• /
• v.51 no.3
• /
• pp.235-243
• /
• 2012

Population dynamics of the American serpentine leafminer, Liriomyza trifolii (Burgess), were observed and modeled in order to compare the effects of air and tomato leaf temperatures inside a greenhouse using DYMEX model builder and simulator (pre-programed module based simulation programs developed by CSIRO, Australia). The DYMEX model simulator consisted of a series of modules with the parameters of temperature dependent development and oviposition models of L. trifolii were incorporated from pre-published data. Leaf surface temperatures of cherry tomato leaves (cv. 'Koko') were monitored according to three tomato plant positions (top, > 1.8 m above the ground level; middle, 0.9 - 1.2 m; bottom, 0.3 - 0.5 m) using an infrared temperature gun. Air temperature was monitored at the same three positions using a self-contained temperature logger. Data sets for the observed air temperature and average leaf surface temperatures were collected (top and bottom surfaces), and incorporated into the DYMEX simulator in order to compare the effects of air and leaf surface temperature on the population dynamics of L. trifolii. The initial population consisted of 50 eggs, which were laid by five female L. trifolii in early June. The number of L. trifolii larvae was counted by visual inspection of the tomato plants in order to verify the performance of DYMEX simulation. The egg, pupa, and adult stage of L. trifolii could not be counted due to its infeasible of visual inspection. A significant positive correlation between the observed and the predicted numbers of larvae was found when the leaf surface temperatures were incorporated into the DYMEX simulation (r = 0.97, p < 0.01), but no significant positive correlation was observed with air temperatures(r = 0.40, p = 0.18). This study demonstrated that the population dynamics of L. trifolii was affected greatly by the leaf temperatures, though to little discernible degree by the air temperatures, and thus the leaf surface temperature should be for a consideration in the management of L. trifolii within cherry tomato greenhouses.

• Journal of Hospice and Palliative Care
• /
• v.5 no.2
• /
• pp.155-162
• /
• 2002

Purpose : The purpose of this study is to provide preliminary information on the hospice care needs of hospice volunteers. Methods : The sample of this study was obtained from those who completed the hospice volunteer education program in three different areas in Korea. This study was conducted by a self-administered questionnaire. The sample analyzed for this study contained 88 hospice volunteers. Frequency, percentage, mean, standard deviation, and logistic regression analysis were performed to produce the findings of this study. Results : The characteristics of the study sample were $40{\sim}49$ aged, middle class, christianity, married women with high school diplomas. They attended at the hospice center with less than 1 year experience. Majority of them had no family members who received a hospice care. The hospice care was strongly required in the field of information, particularly regarding their diseases and treatments. The identified hospice care needs were the prevention and treatment of gangrene in the field of physical needs, the maintenance of closer relationship with their doctors in the field of emotional needs, and the support of supporting medical insurance in the field of socioeconomic needs. The significant predictors were 'having hospice care taker among family members' in the field of the total hospice care needs and physical needs. Two predictable variables were found in the field of emotional needs. However, none were found to be a predictable variable in the field of information and socioeconomic needs. Conclusion : The findings or this study have a weekness of generalizability due to the sampling methodology used in this study. Thus, further research should be designed in relation to this topic with a probability sampling method.

• Journal of Mushroom
• /
• v.2 no.3
• /
• pp.115-126
• /
• 2004

Somatic hybrids of inter-compatible and inter-incompatible strains were obtained by protoplast fusion. The fusion products between compatible strains, Pleurotus ostreatus and P. florida, formed heterokaryons, while fusants between incompatible strains such as P. cornucopiae + P. florida, P. ostreatus + Ganoderma applanatum, P. florida + Ganoderma lucidum, and P. ostreatus + Flammulina velutipes formed synkaryons that retained genes from both parents. The heterokaryons showed the same level of basidioma development. In contrast, the synkaryons showed unique characteristics including clamp connection formation at mitosis, either partner basidioma development, and abnormal segregation and recombination compared with inter-compatible strains. Synkaryons can be classified into homokaryoyic and heterokaryotic type. A comparison of somatic hybrids with compatible and incompatible strains was made using random amplified polymorphic DNA (RAPD) analysis. The heterokaryons between compatible species showed the same level of variability and contained both parental RAPD bands. In contrast, most of the synkaryons between incompatible species showed similarity to those of either parental bands and non-parental RAPD bands. Synkaryons can be classified into microgenome insertion type and macrogenome insertion type. A tetrapolar mating system was found among monospore isolates in somatic hybrids and wild type P. ostreatus. Homokaryons from each somatic hybrid combination were paired with tester homokaryons of the initial wild type of P. ostreatus. The changed mating types were identified in progenies. The pattern of mating type switching in somatic hybrids depends on compatibility of fusion partner. There are several factors related to the mechanism of clamp connection formation and fruiting body development of synkaryons. Of these,the major factor may be associated with self-fertility and mating type switching such as homokaryotic fruiting of wild type P. ostreatus. This review will discuss these aspects.

• Journal of radiological science and technology
• /
• v.39 no.4
• /
• pp.615-622
• /
• 2016

The 18~20G needle is used to computer tomography (CT) contrast examination. Therefore, a patient has to apply a self-administering hemostasis (conventional method: CM) and often experience bleeding in the course. Thus, we developed the new disposable transparent tourniquet (TT) for reducing. This study was to compare the usefulness between the proposed transparent tourniquet and the existing hemostatic methods. A Satisfaction survey was conducted by 50 patients and 25nurses. The survey contained the satisfaction of the convenience, safety, sanitation, and wearing sensation of transparent tourniquet. We employed face-to-face interview on 5 points likert scales. And Chi-square, paired T-test were used for the statistics verification. As for the patients, the satisfaction levels were measured for each category with the gender, age. Patients evaluation, overall satisfaction high average sore used TT and there were statistical significance by paired T-test(p<0.05). The following is the average satisfaction level for each category: $4.4{\pm}0.53$ in; $4.28{\pm}0.57$ in safety; $4.52{\pm}0.54$ in sanitation; $4.16{\pm}0.54$ in wearing sensation. So the overall satisfaction level is measured at $4.34{\pm}0.51$. As for the nurses, CT work experience and the current satisfaction with tourniquet were counted as variables. The satisfaction level for each category is: $3.8{\pm}0.7$ in; $3.6{\pm}0.68$ in safety; $3.4{\pm}0.5$ in sanitation; $3.9{\pm}0.49$ in hemostasis. The overall satisfaction level is $3.8{\pm}0.3$. Patients' satisfaction levels were very high with little difference among variables. Nurses' satisfaction levels were different with the TT depending on their work experience but their overall satisfaction was high. This TT will be a starting point to minimizing patient's inconvenience and more studies are necessary to enhance their satisfaction.

• Korean journal of food and cookery science
• /
• v.26 no.6
• /
• pp.745-752
• /
• 2010

The purpose of this study was to investigate the perceptions and preferences held by the general public concerning jeungpyun. Self-administered questionnaires were collected from 484 residents in Daegu and Gyeongbuk. The questionnaires contained questions on the recognition of jeungpyun, purchasing, frequency, purchasing factor, and preferences for and purchasing of jeungpyun containing different kinds of makgeoilli. According to the survey, females were higher than males (31.4%) by 69.7%, and that for ages 20~30' was the highest. Most of them were students (39.7%), and 81.7% of them had an income of under 4,000,000 won per month. The results of the eating frequency rate showed that over half of the people had jeungpyun once a month, and the recognition of jeungpyun for females (3.63) was higher than that for males (3.09). The respondents who joyed eating jeungpyun mentioned 'good taste and texture' as the top reason for eating jeungpyun, and 'different food and bad flavor' was mentioned as the reason for disliking it. As a result, popularization of jeungpyun was based on two factors: 1) fundamental factor and 2) external factor, and both significantly influence the preference for and purchasing of jeungpyun,-. Therefore, future studies should be conducted to improve preference for jeungpyun as a functional food. The results of preference and purchasing show that jeungpyun prepared with rice, rubus coreanum miquel, black bean, grape and green mume makgeoilli.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.15 no.3
• /
• pp.198-206
• /
• 1995

Baled silage making(BS) of selected forage crops was discussed during 1991-1993, to determine the best cutting time of the plants for BS production, BS yields and silage quality. Seven species of forage crops and pasture grasses(rye, barley, spring oat, Italian ryegrass, orchardgrass, alfalfa and grass-legume pasture mixtures) were harvested at different stage of growth from young plant to physiological maturity, and baled in a self constructed square baling chamber. Each bales, measured 90cm length, 60cm width and 50cm height, were wrapped with 0.05mrn thick polyethylene plastic film, and stored in stack silo. Each bales were weighed between 15-20 kg in dry matter basis. The effects of pre wilting and formic acid addition on the silage quality of young plant materials, which contained high water concentration, was also evaluated during the experiment. Rye plant including of barley and spring oat were evaluated as a good materials for baled silage making. Fodder rye produced high quality BS with a value of silage quality point 84(Flieg's point) when the plant harvested at stage of greatest dry matter accumulation by 12.64 tonha. The best quality BS of barley was obtained at stage of hard dough to yellow stage by 11.9 ton/ha dry matter yield and 81 point silage quality. Italian ryegrass and pasture grasses including of orchardgrass, alfalfa and grass-legume pasture mixtures procuced also high quality bale silage by harvesting at stage of late blooming. However pre witting operation and formic acid addition was required for BS production of grass materials because of high water contents. Water contents of Italian ryegrass and other pasture species ranged 18.9%(Italian) to 20.8%(alfalfa). Silage quality point of Italian BS harvested at late blooing was increased from 72 to 88 by 1/2-one day pre wilting and 0.3% formic acid treatment. Silage quality of young plant materials of rye and other forage crops, barley and spring oat were also improved markedly through the pre wilting treatment and formic acid addition.