• 대한기계학회논문집A
• /
• 제25권12호
• /
• pp.1974-1980
• /
• 2001

The control algorithm of a new type self-bearing step motor is presented. The motor actuator is used for both motor and bearing functionality without any redundant coil windings or redundant electromagnets. The self$.$bearing step motor layout and its control method are described. A linearized farce-current-displacement relationship is derived. As the result of the unbalance response approach, the constant torque production is possible fur the supply current regulation algorithm. And even if the bearing functionality is added in the motor functionality, no additional current for bearing functionality is possible, and this leads to minimize the net power loss. Also, the unbalance response shows the independent bearing force and motor torque.

• 한국정밀공학회지
• /
• 제18권10호
• /
• pp.93-100
• /
• 2001

The analysis and control of a new type unsymmetrical slotted self-bearing step motor for small angle control is presented. The motor actuator is used for both motor and bearing functionality without any additional coil windings or electromagnets for bearing functionality. A circular-arc, straight-line permeance model for the fringing effect is presented. An unsymmetrical slotted self-bearing step motor layout and control algorithm are described. A new control current generation method using the electromagnets layout geometry, which needs no additional current for bearing functionality, is proposed. As the result of this analysis the fringing effect largely influences on the system characteristics. especially in torque. Even if the bearing functionality is added into the motor functionality, it is shown that the magnitude of torque is not changed.

• 제어로봇시스템학회논문지
• /
• 제7권10호
• /
• pp.806-811
• /
• 2001

The analysis and control algorithm of a new type unsymmetrical self-bearing step motor is presented. The motor actuator is used for both motor and bearing functionality without any redundant coil windings or redudant electromagnets for bearing functionality. Self bearing step motor layout and control current generation method for unsymmetrical position of electromagnets are described. This new current generation method without additional current for bearing functionality leads to minimize the power loss. As the result of the unbalance response approach, the constant torque is possible, even though the bearing functionality is added or not.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.415-420
• /
• 2006

This paper introduces a new self-bearing motor which combines a homopolar step motor and a passive magnetic bearing. Compared with conventional self-bearing motors which are mostly based on the theory of active magnetic bearings and therefore have some difficulties in design of the complicated flux distribution and control of the levitation force and the torque independently, the proposed self-bearing motor has a very simple and novel structure and operating principle. for the levitation, it works just like passive magnetic bearings which use the repulsive force between permanent magnets. On the other hand, its rotation principle is quite similar to that of a conventional homopolar step motor. In this paper, we introduce the basic structure and the operating principle in detail, and show some results of FEM analysis to predict the performance of the proposed self-bearing motor and further, to get the optimal design parameters.

• 한국소음진동공학회논문집
• /
• 제16권12호
• /
• pp.1201-1207
• /
• 2006

This paper introduces a step motor with a passively levitated rotor which comprises a homopolar step motor and a passive magnetic bearing. Compared with conventional self-bearing motors which are mostly based on the active magnetic bearing technology, the proposed motor has a very simple structure and operating principle. For the levitation, it works just like passive magnetic bearings which use the repulsive force between permanent magnets. Halbach array is used to increase the bearing stiffness. On the other hand, its rotation principle is just the same with that of conventional motors. In this paper, we introduce the design scheme to avoid the flux interference possibly produced by electromagnets and permanent magnets, and show some results of FEM analysis to predict the performance of the proposed motor.

• 한국유체기계학회 논문집
• /
• 제14권5호
• /
• pp.24-30
• /
• 2011

500W class MTG(Micro turbine generator) operating at 400,000 rpm is under development. From the cycle analysis, it is decided that the self-sustaining speed of MTG is 200,000rpm and the generating speed is 400,000 rpm. Therefore, motor should be designed so that it is able to rotate the rotor up to 200,000rpm and generator should designed so that it is able to generate 500W output at 400,000rpm. First step to design motor/generator is to determine the power and efficiency requirement. Not only the power into the compressor and from the turbine at the operating speed but also the mechanical and electrical losses should be considered in determining the power and efficiency requirement. This study presents the procedure and the results of determining the power and efficiency requirement considering the mechanical and electrical losses depending on the rotating speed which is measured from the experiment.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2002년도 추계공동학술대회논문집
• /
• pp.13-19
• /
• 2002

2-체널 링-코어 프럭스-게이트 콤파스(two-channel ring-core Flux-Gate Compass: FG-Compass)의 성능평가 시스템 설계와 구현방법 및, 다항회귀 모형 기반의 평가 절차와 방법을 기술했다. 성능평가 시스템은 스텝모터 구동 유닛과, 방위정보 전송 유닛, 다항회귀식을 이용한 평가 프로그램 등으로 구성하였다. 성능평가 실험결과, FG-Compass를 전체 잔차 $\pm$4$^{\circ}$, 고유 잔차 $\pm$2$^{\circ}$로 분석하였다. 이 결과는 일반적인 FG-Compass의 고유 잔차 $\pm$4$^{\circ}$와 비교하여 정밀한 것으로, 성능이 향상된 새로운 FG-Compass 설계가 가능함을 나타낸다. 또한, 자동으로 잔차를 추정하고 도정할 수 있는 스마트 FG-Compass 콤파스의 설계론에 관해서도 논의하였다.

• 한국항해항만학회지
• /
• 제26권5호
• /
• pp.529-535
• /
• 2002

2-체널 링-코어 프럭스-게이트 콤파스(Two-Channel Ring-Core Flux-Gate Compass; TCRC FG-Compass)의 성능평가 시스템 설계와 구현방법 및, 다항회귀 모형 기반의 평가 절차와 방법을 기술했다. 성능평가 시스템은 스템모터 구동 유닛과, 방위정보 전송 유닛, 다항회귀식에 의한 평가 프로그램 등으로 구성하였다. 성능평가 실험결과, TCRC FG-Compass는 잔차가 $2^{\circ}$인 반면, 기존의 FG-Compass는 잔차가 $4^{\circ}$임을 나타냈다. 따라서 성능이 향상된 새로운 FG-Compass 설계가 가능함을 확인하였다. 또한, 자동으로 잔차를 추정하고 보정할 수 있는 설계론에 관해서도 논의하였다.