• Elastomers and Composites
• /
• 제34권1호
• /
• pp.45-52
• /
• 1999

본 논문에서는 미세 상분리된 블럭 공중합체 박막의 특이상에서 금 입자들이 어떻게 자기응집(self assemble) 되고 잘 배열된 패턴을 형성하는지를 살펴보았다. 본 연구에서는 원통형 모폴로지를 갖는 PS-PB-PS 삼블럭 공중합체(30wt% PS) 박막(${\sim}100nm$)을 0.1wt% 톨루엔 용액으로부터 캐스팅하여 고분자 박막 형판(template)으로 사용하였다. 각각의 상이한 용매 증발조건으로부터 PB matrix내에 수평배열 PS cylinder와 수직 PS cylinder를 함께 갖는 막이 얻어졌다. 블럭 공중합체박막의 표면 및 bulk 몰폴로지를 살펴보기 위하여 단면투과전자현미경(TEM)을 사용하였다. Nano-scale 패턴을 얻기 위하여는 소량의 금입자를 블럭 공중합체 박막상에 증발시켰다. 캐스팅된 상태 그 대로의 박막형판이 사용되어질때 금입자들은 표면 장력이 적은 PB상에 우선적으로 자기응집(self as-semble)하여 비교적 잘 배열된 nano-scale의 패턴을 형성하였다. 그러나 열처리(annealing)에 의하여 표면장력이 적은 PB-rich충이 형성된 후에는 금입자의 자기응집에 의한 패턴은 관찰되지 않았다.

• Ocean and Polar Research
• /
• 제28권2호
• /
• pp.145-151
• /
• 2006

A broadband self-recording hydrophone was developed to conveniently assemble a hydrophone array for use in receiving underwater sound waves. A trigger device with an electromagnetic induction coupler was also developed to control the hydrophone's operation. Main configurations and specifications of the self-recording hydrophone are introduced in this paper. We present experiment results conducted in a water tank to examine the operating behavior of the hydrophone. Some advantages are discussed when the self-recording hydrophones are used to make up a hydrophone array.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.476-480
• /
• 2003

This paper presents an effective method to analyze the dynamic characteristics for the shilling transients of power transmission system using the multibody dynamics, which is composed of subsystem equation, subsystem assemble, and the self-determining technique for the system degree of freedom. Using the advantages of multibody dynamics, the proposed method can be used easily for mathematical models of mechanical systems, such as a power transmission, compared with newtonian method. With this theory, dynamic simulation program was developed. The program can be used to verify system performances, transient phenomena, and other dynamic problems. The simulation of a target system was presented, and its validity was attained by being compared with the previous analysis using newtonian method.

• 한국고분자학회지:고분자과학과기술
• /
• 제16권6호
• /
• pp.754-768
• /
• 2005

• 한국재료학회지
• /
• 제19권6호
• /
• pp.300-304
• /
• 2009

The domain structures of annealed (001)-oriented $Pb(Mg_{1/3}Nb_{2/3})O_3-x%PbTiO_3$ (PMN-x%PT) crystals for x = 10, 20, 30, 35, and 40 at% were investigated by Polarized Optical Microscopy (POM) and Scanning Force Microscopy (SFM) in the piezoresponse mode. Both Polar Nano-Domains (PND) and long strip-like domains were clearly observed. The results also showed how the domain structure changed between phases with an increasing x in the PMN-x%PT crystals and the domain hierarchy on various length scales ranging from 40 nm to 0.1 mm. Distorted pseudo-cubic phase (x < 20%) consisted of PNDs that did not self-assemble into macro-domain plates. The rhombohedral phase (x = 30%) consisted of PNDs that began to self-assemble into colonies along preferred {110} planes. The monoclinic phase (x = 35%) consisted of miniature polar domains on the nm scale, whereas, the tetragonal phase (x = 40%) consisted of {001} oriented lamella domains on the mm scale that had internal nano-scale heterogeneities, which self-assembled into macro-domain plates oriented along {001} the mm scale.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.173-173
• /
• 2006

We have explored a strategy to control the supramolecular nano-structures self-assembled from rigid segments through attachment of flexible chains through microphase separation and anisotropic arrangement. Supramolecular structures formed by self-assembly of rigid building blocks can be precisely controlled from 1-D layered, 3-D bicontinuous cubic to 2-D cylindrical structures by systematic variation of the type and relative length of the respective blocks. Furthermore, depending on the individual molecular architectures, rigid building blocks self-assemble into a wide range of supramolecular structures such as honeycomb, disk, cylinder, helix, tube, barrel stave, and nano-cage.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2007년도 춘계학술발표회 초록집
• /
• pp.3-4
• /
• 2007

고분자 반도체를 이용한 유기 박막트랜지스터(OTFT) 소자 제작시 특성 향상을 위해 Self-Assemble Monolayer (SAM)을 이용한 유기 Gate 절연막과 source/drain 전극의 표면처리에 대해 설명하였다. Gate insulator의 경우 소수성 SAM이 고분자 반도체와의 상호작용으로 배열도를 향상시켜 이동도를 증가시켰으며, 전극처리의 경우 접촉저항을 낮추어 injection을 증대시키는 효과를 나타내었다. 각각의 경우 적용되는 SAM 재료와 효과를 극대화시키기 위한 처리공정 전반에 대해 설명하였다.

• 한국세라믹학회지
• /
• 제51권3호
• /
• pp.218-223
• /
• 2014

The domain structures, dielectric properties, and phase transformation of (001)-oriented $Pb(Mg_{1/3}Nb_{2/3})O_3-x%PbTiO_3$ (PMN-x%PT) crystals for x=20, 30, 35, and 40 mole% have been investigated. PMN-20%PT consists of polar nano-domains (PND) which do not self-assemble into macro-domain plates. PMN-30%PT consists of PNDs which begin to self-assemble into colonies along preferred {110} planes. PMN-35PT consists of miniature polar domains on the nm scale. PMN-40%PT consists of {001} oriented lamella domains on the mm scale that have internal nano-scale heterogeneities. The dielectric properties of poled (001) PMN-x%PT single crystals have been measured for orientations both parallel and perpendicular to the [001] poling direction. The results of the temperature dependence of the dielectric constant and mesh scans for the 30%PT sample demonstrate that the initial monoclinic phase changes to single domain tetragonal phase and to cubic phase with increasing temperature.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2005년도 춘계학술대회 논문집
• /
• pp.401-406
• /
• 2005

According to the ubiquitous times that is new important topic, the miniature is demanded in the industry at large. The high accuracy and accumulation make the assembly equipment and the production equipment huge from the size of view. The huge equipment brings about the expensive price of the equipment, a low flexibleness and a low productivity. It makes the manufacturing equipment huge that the accuracy only depends on the mechanism stiffness. The position of two assembled parts is transformed with the global coordinate system whose datum is machine coordinate system. The purpose of this research is invention of the module that can adjust one part to the order part automatically. The module that has a function of self adjustment only takes a stiffness in assemble direction and can be moved freely in the other direction so this function makes a self adjustment. The self adjustment module reduces the tact time and also diminishes the inferior goods and makes reconfigurable machine in $\mu-part$ assembly.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 춘계학술발표대회
• /
• pp.8.1-8.1
• /
• 2009

The self-assembly of peptide-based building blocks into nanostructures is an attractive route for fabricating novel materials because of their capacity for molecular recognition and functional flexibility as well as the mild conditions required in the fabrication process. Among various peptide-based building blocks forming nanostructures, the simplest building blocks are aromatic dipeptides like diphenylalanine, which can readily self-assemble into nanotubes in aqueous solutions at ambient conditions. Recently, we have developed a high-temperature solid-phase self-assembly process for diphenylalanine. Through this novel process, we succeeded in the growth of vertically well-aligned, uniform nanowires from amorphous peptide thin film. To demonstrate the versatility of our approach, we also fabricated a micropattern of peptide nanowires by combining our solid-phase growth method and simple soft lithographic techniques. We believe that our studies on peptide self-assembly will provide a new horizon for peptide-based nanofabrication.