• 한국전산유체공학회:학술대회논문집
• /
• 2008.10a
• /
• pp.367-373
• /
• 2008

Spinning detonations propagating in a circular tube were numerically investigated with a one-step irreversible reaction model governed by Arrhenius kinetics. Activation energy is used as parameter as 10, 20, 27 and 35, and the specific heat ratio and the heat release are fixed as 1.2 and 50. The time evolution of the simulation results was utilized to reveal the propagation mechanism of single-headed spinning detonation. The track angle of soot record on the tube wall was numerically reproduced with various levels of activation energy, and the simulated unique angle was the same as that of the previous reports. The maximum pressure histories of the shock front on the tube wall showed stable pitch at Ea=10, periodical unstable pitch at Ea=20 and 27 and unstable pitch consisting of stable, periodical unstable and weak modes at Ea=35, respectively. In the weak mode, there is no Mach leg on the shock front, where the pressure level is much lower than the other modes. The shock front shapes and the pressure profiles on the tube wall clarified the mechanisms of these stable and unstable modes. In the stable pitch at Ea=10, the maximum pressure history on the tube wall remained nearly constant, and the steady single Mach leg on the shock front rotated at a constant speed. The high and low frequency pressure oscillations appeared in the periodical unstable pitch at Ea=20 and 27 of the maximum pressure history. The high frequency was one cycle of a self-induced oscillation by generation and decay in complex Mach interaction due to the variation in intensity of the transverse wave behind the shock front. Eventually, sequential high frequency oscillations formed the low frequency behavior because the frequency behavior was not always the same for each cycle. In unstable pitch at Ea=35, there are stable, periodical unstable and weak modes in one cycle of the low frequency oscillation in the maximum pressure history, and the pressure amplitude of low frequency was much larger than the others. The pressure peak appeared after weak mode, and the stable, periodical unstable and weak modes were sequentially observed with pressure decay. A series of simulations of spinning detonations clarified that the unsteady mechanism behind the shock front depending on the activation energy.

• Rapid Communication in Photoscience
• /
• v.4 no.2
• /
• pp.37-40
• /
• 2015

To examine the photosensitized biomolecules damaging activity, dimethoxyP(V)tetrakis(2-naphthyl)porphyrin (NP) and dimethoxyP(V)tetraphenylporphyrin (PP) were synthesized. The naphthyl moiety of NP hardly deactivated the photoexcited P(V)porphyrin ring in ethanol. In aqueous solution, the naphthyl moiety showed the quenching effect on the photoexcited porphyrin ring, possibly through electron transfer and self-quenching by a molecular association. Binding interaction between human serum albumin (HSA), a water soluble protein, and these porphyrins could be confirmed by the absorption spectral change. The apparent association constant of NP was larger than that of PP. It is explained by that more hydrophobic NP can easily bind into the hydrophobic pockets of HSA. The photoexcited PP effectively induced damage of the tryptophan residue of HSA, through electron transfer-mediated oxidation and singlet oxygen generation. NP also induced HSA damage during photo-irradiation and the contributions of the electron transfer and singlet oxygen mechanisms were speculated. The electron transfer-mediated mechanism to the photosensitized protein damage should be advantageous for photodynamic therapy in hypoxic condition. The quantum yield of the HSA photodamage by PP was significantly larger than that of NP. The quenching effect of the naphthyl moiety is considered to suppress the photosensitized protein damage. In conclusion, the naphthalene substitution to the P(V)porphyrins can enhance the binding interaction with hydrophobic biomacromolecules such as protein, however, this substitution may reduce the photodynamic effect of P(V)porphyrin ring in aqueous media.

• International journal of advanced smart convergence
• /
• v.9 no.1
• /
• pp.82-89
• /
• 2020

This study is a design study related to the application of 3D printer technology for garment printing. Knitting, which used to be a home industry in the early days, originally comes from hand-knitting. This evolved with various personal devices as a small job for the self-sufficiency of early European housewives. In addition, since the Industrial Revolution, mechanical production entered the mass production mass supply system, and various apparel products were provided to consumers in accordance with mass standardized dimensions. This is similar to the development process in Korea. In addition, it has formed a considerable market with the situation that it can produce and supply apparel products at low labor costs of first-generation Namdaemun and Dongdaemun merchants. As the production shifted to the Southeast Asian region due to the increase in labor costs in the domestically developed social situation, the production of garment products in Korea is now almost 5%. As a result, apparel-related production facilities and related companies are constantly moving to other countries to move production facilities sensitively due to rising labor costs. Recently, smart factory automation has been planned to explore new possibilities. In addition, in recent years, with the evolved appearance of consumers, the appropriate supply of the right amount of production has appeared, and the 3D printer applied to personal garment output has attracted considerable interest in the customized market. Therefore, in order to become a new hope and a small addition to various clothing workers, this study conducted related research on the following 3D printers for clothing output and attempted to proceed with a new design.

• Journal of the Korean Society of Tobacco Science
• /
• v.20 no.1
• /
• pp.57-65
• /
• 1998

This study was conducted to develop a resistant tobarro against Potato virus Y (PVY) by transformation of the plants with genetically engineered viral genes. The complimentary DNAs (cDNAS) of potato virus Y-necrosis strain (PVY-Vn) replicase mutant genes (3'-deleted, 5'-deleted and ADD-mutant Nlbs) were synthesized through RT-PCR by using purified PVY-VN RNA and synthesized primers, and cloned in the sense orientation into a plant expression vector (pMBPI), The cDNAS of the genes were transferred into Agrobacterium tumefaciens LBA 4404, and then transformed into tobacco (Nicotiana tabacum cv. Burley 21) plants. Regenerated plants were tested for PVY resistance by inoculation test; 13 transgenic plants including 7 for 3'-deleted Nlb, 3 for 5'-deleted Nlb, and 3 for ADD-mutant Nlb appeared to be resistant at 4 weeks after inoculation with PVY-VN. Among the 13 transgenic tobacco plants, 8 plants had no symptom up to 14 weeks after inoculation. The progenies ($T_1$) from self-fertilization of the transgenic lines varied 0.0% to 81.2% in their resistance (% of resistant plants). The analysis of Nlb-31deleted, -5'deleted and -ADD mutant in the $T_1$ plants by polymerase chain reaction (PCR) showed that Nlb-3'deleted, -5'deleted and -ADD mutants were detected in all of the resistant plants. These results suggest that the PVY resistance was inherited in the $T_1$ generation.

• Journal of Electrochemical Science and Technology
• /
• v.11 no.1
• /
• pp.92-98
• /
• 2020

SnO₂-based high-capacity anode materials are attractive candidate for the next-generation high-performance lithium-ion batteries since the theoretical capacity of SnO₂ can be ideally extended from 781 to 1494 mAh g^-1. Here 3D etched Cu foam is applied as a current collector for electron path and simultaneously a substrate for the SnO₂ coating, for developing an integrated electrode structure. We fabricate the 3D etched Cu foam through an auto-catalytic electroless plating method, and then coat the SnO₂ onto the self-supporting substrate through a simple sol-gel method. The catalytic dissolution of Cu metal makes secondary pores of both several micrometers and several tens of micrometers at the surface of Cu foam strut, besides main channel-like interconnected pores. Especially, the additional surface pores on etched Cu foam are intended for penetrating the individual strut of Cu foam, and thereby increasing the surface area for SnO₂ coating by using even the internal of Cu foam. The increased areal capacity with high structural integrity upon cycling is demonstrated in the SnO₂-coated 3D etched Cu foam. This study not only prepares the etched Cu foam using the spontaneous chemical reactions but also demonstrates the potential for electroless plating method about surface modification on various metal substrates.

• Progress in Superconductivity and Cryogenics
• /
• v.6 no.2
• /
• pp.20-24
• /
• 2004

Bi-2223 wire, the first-generation high temperature superconducting (HTS) wire, was successfully commercialized and various electrical machinery and equipment are actively being developed in many countries. Because its critical current is too small to realize the lossless conducting part of electric power system with a HTS wire, multi-HTS paths are used to enlarge the critical current of HTS system. Though the resistance generated in HTS wire by transport current is very small, the difference of it in multi-path is the additional reason which causes the non-uniform current sharing in multi-HTS path except the well known reason, the difference of inductance between each path. In this paper, experimental research on current sharing of multi-strand and multi-stacked HTS wire was implemented. The whole critical current of multi-HTS paths is not equal to sum of critical current of each path because of non-uniform current sharing occurred in this paths. It was verified experimentally that Bi-2223 wires have different resistance generated by same transport current even if they was manufactured in same progress of work. Current sharing phenomenon was affected by difference of resistance and self and mutual inductance.

• Journal of Korean Institute of Industrial Engineers
• /
• v.37 no.4
• /
• pp.323-330
• /
• 2011

Globalization of market and diversification of customers' needs make enterprises to collaboration of participants in supply chain. To establish collaboration, supply chain must have the flexibility and reconfigurability, which are supported by fractal based supply chain management (FrSCM). In this paper, base on the FrSCM, formulation of trust model among the enterprises in the supply chain, and development of profit sharing strategies in the supply chain based on the trust model are investigated. To evaluate trust model, generation of enterprise's goal and its description, extraction and systematic composition of trust factors and trust evaluation are investigated. Based on the developed model, we developed the fuzzy inference engine to evaluate the trust value in terms of numerical value. And then revenue sharing strategies are developed based on the fractal concept and trust model for the collaborative SCM. The fractal concept is used to obtain the optimal production and transportation plans. In addition, the trust model will be integrated into the RS model. In such an RS model, the supply chain will obtain the maximum total profit and profit of each participant depends on its trust value.

• Fashion & Textile Research Journal
• /
• v.18 no.6
• /
• pp.766-775
• /
• 2016

In the era of globalization and unlimited competition, Korean universities need a breakthrough in their education system according to the changing education landscape, such as lower graduation requirements to cultivate more multi-talented convergence leaders. While each student has different learning capabilities, which results in different performance and achievements in the same class, the uniform education that most universities are currently offering fails to accommodate such differences. Blended learning, synergically combining offline and online classes, enlarges learning space and enriches learning experiences through diversified tools and materials, including multimedia. Recently, universities are increasingly adopting video contents and on-offline convergence learning strategy. Thus, this study suggests a teaching method based on blended learning to more effectively teach existing pattern CAD and virtual CAD in the Apparel Pattern CAD class. To this end, this researcher developed a teaching-learning method and curriculum according to the blended learning phase and video-based contents. The curriculum consisted of 2D CAD (SuperAlpha: Plus) and 3D CAD (CLO) software learning for 15 weeks. Then, it was loaded to the Learning Management System (LMS) and operated for 15 weeks both online and offline. The performance analysis of LMS usage found that class materials, among online postings, were viewed the most. The discussion menu most accurately depicted students' participation, and students who did not participate in discussions were estimated to check postings less than participating students. A survey on the blended learning found that students prefer digital or more digitized classes, while preferring face to face for Q&As.

• Korean Journal of Adult Nursing
• /
• v.17 no.5
• /
• pp.719-731
• /
• 2005

Purpose: This research was conducted to explore the experience of middle-aged women parting with their children and to develop a grounded theory. Method: The participants were 11 women in their 50's who had experienced parting with their children due to schooling, military service and marriage. The grounded theory methodology based on symbolic interactionism was used. Results: 106 concepts, 30 subcategories and 14 categories were derived from the analysis through processes of open coding, axial coding and selective coding. The central phenomenon was 'happy but sad' and the core category was a process of 'independence that is sorrowful yet delightful'. Four types were identified; the independent-type; submissive -type; family-reliant-type ; and fragile-type; based on the attachment to the child, state of mind, satisfaction of the situation, family support system and self-achievement. Conclusion: This research identified that the modern Korean middle-aged women who are considered to be the 'sandwich generation' since they have experienced a turbulent history and the change from a confucian parent-child lifestyle to a couple-oriented one, moved away from an attitude dependent on children in parting with them and started preparing for an independent late life. Based on the results, the verification research is advised on the variables that affect the experience of parting with children.

• Korean Journal of Computational Design and Engineering
• /
• v.15 no.5
• /
• pp.383-392
• /
• 2010

The purpose of this study is to develop three Judo-doll systems for enhancement of Judo's performance. Traditional Judo training requires a human training partner. Unfortunately it is not always easy to find one. Multifunctional Judo-doll training system has therefore been developed, and is described here. The system consists of a dummy, a power generating mechanism, and kinematic links. The power-generating mechanism generates forces similar to those of a human, by adjusting deadweights and controlling powderbrake's forces. The powderbrake force is controlled by the microprocessor according to the exercise scenario. The kinetic links, which mimic a human training partner's motions, has been developed based on a $Vicon^{TM}$ system's analysis of the movement of human training partners. This mechanism whose name is "L link-wire" consists of L type links, wire, roller, and dead weight. This mechanism generates the force that leads the link to the neutral position regardless the link is pushed or pulled. The lifting mechanism that lifts the doll when the one-armed shoulder throw skill is applied is also developed. A 32-bit microprocessor controls the whole system; it reads the loadcell data, controls the electromagnetic force, and communicates with a PC via Bluetooth. The training history, including loadcell data, date, and training time, is stored in the PC for analysis. This training system can be used to enhance the Judo performance of any self training player.