• The KIPS Transactions:PartC
• /
• v.12C no.7 s.103
• /
• pp.1039-1046
• /
• 2005

TCP SACK is the unique mechanism to reflect the situation of sink's sequence space, some TCP variants and proposals can perform in conjunction with SACK mechanism for achieving optimal performance. By definition of RFC 2018, however, each contiguous block of data queued at the data receiver is defined in the SACK option by two 32-bit unsigned integers in network byte order. Since TCP Options field has a 40-byte maximum length, when error bursts now, we note that the available option space may not be sufficient to report all blocks present in the receiver's queue and lead to unnecessarily force the TCP sender to retransmit Packets that have actually been received by TCP sink. For overcoming this restriction, in this thesis, a new solution named 'one-byte offset based SACK mechanism' is designed to further improve the performance or TCP SACK and prevent those unwanted retransmissions. The results or both theory analysis and simulation also show that his proposed scheme operates simply and more effectively than the other existing schemes by means of the least bytes and most robust mechanism to the high packet error rates often seen in networks environment.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.5
• /
• pp.444-450
• /
• 2004

In mobile communications environment, STBC-OFDM(Space Time Block Code-Orthogonal Frequency Division Multiplexing) system with transmit diversity obtains the MRRC(Maximal Ratio Receiver Combining) diversity gain in time-invariant channel between two received symbols. But in time-variant channel, due to the interference between received symbols, MRRC diversity gain cant be obtained. So, when the mobile device with transmit diversity moves in high speed, the scheme to reduce the performance degradation due to the interference is needed. In this paper, we propose the receiver architecture with advanced transmit diversity, which improves the performance of STBC-OFDM system. The proposed architecture obtains the diversity gain without the change of transmit bandwidth at the receiver with the interference canceller using ZF(Zero Forcing) algorithm. Simulation results show performance improvement as doppler shift is increasing.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.11
• /
• pp.87-92
• /
• 2005

This paper analyzes the performance for an improved multistage parallel interference cancellation (PIC) technique with a reverse-link synchronous transmission technique (RLSTT) for DS-CDMA system in a frequency-selective Rayleigh fading channel with an imperfect power control scheme. The performance degradation due to power control error (PCE), which is approximated by a log-normally distributed random variable, is estimated as a function of the standard deviation of the PCE. The uncoded bit error performance is evaluated in order to estimate the system capacity. Comparing with the conventional one-stage PIC system, we show achievable gain around $60\%$ by the RLSTT even in the presence of PCE. We conclude that the capacity can be further improved via RLSTT, which alleviates the detrimental effects of the PCE

• Journal of Internet Computing and Services
• /
• v.11 no.2
• /
• pp.17-30
• /
• 2010

Many applications in Wireless Sensor Networks require collecting all data without loss from nodes. End-to-End data retransmission, which is used in the Internet for reliable transport, becomes very inefficient in Wireless Sensor Networks, since wireless communication, and constrained resources pose new challenges. We look at factors affecting reliability, and search for efficient combinations of the possible options. This paper proposes an efficient Overhearing based reliable transfer protocol in Wireless Sensor Networks by introducing Selective and implicit Acknowledgement. Finally, it is clarified that the proposed scheme is efficient for reliable data transfer in WSN.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.12
• /
• pp.41-50
• /
• 1999

In this paper, the new VLSI architecture of a reconstruction filter for morphological image segmentation is proposed. The filter, based on the $h_{max}$ operation, simplifies the interior of each region while preserving the boundary information. The proposed architecture adopts a partitioned memory structure and an efficient image scanning strategy to reduce the operations. The proposed memory partitioning scheme makes it possible that every data required for processing can be read from each memory at a time, resulting in parallel data processing. By the extended connectivity consideration, the operation is much decreased because more simplification is achieved in scanning stage. The selective raster scan strategy endows the satisfactory noise removal capability with negligible hardware complexity increase. The proposed architecture is designed using VHDL, and functional evaluation is performed by the CAD tool, Mentor. The experiment results show that the proposed architecture can simplify image profile with less than 18% operations of the conventional method.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.12
• /
• pp.2121-2133
• /
• 1997

A finite element code is developed for 3-D self-contact problems, using continuum elements with a SRI(Selective Reduced Integration) scheme to prevent locking phenomenon by the incompressibility of rubber. Contact treatment is carried out in two ways : using the displacement constraints in case of rigid contact ; and imposing the same contact forces on two contact boundaries in case of self-contact. The finite element code developed is applied to the deformation analysis of C.V.joint boots which maintain lubrication conditions and protect the C.V.joint assembly from impact and dust. The boot accompanies large rotation depending on the rotation of the wheel axis and leading to the self-contact phenomena of the boot bellows. Since this contact phenomenon causes wear of the product and has great influence on the endurance life of the product, it is indispensable to carry out stress analysis of the rubber boots. In case of self-contact, various methods for determining contact forces have been suggested with an appropriate contact formulation. Especially, the types of penetration in self-contact are modularized to accelerate conputation with a contact algorithm.

• Journal of Communications and Networks
• /
• v.5 no.3
• /
• pp.266-274
• /
• 2003

One of the major issues in current on-demand routing protocols for ad hoc networks is the high resource consumed by route discovery traffic. In these protocols, flooding is typically used by the source to broadcast a route request (RREQ) packet in search of a route to the destination. Such network-wide flooding potentially disturbs many nodes unnecessarily by querying more nodes than is actually necessary, leading to rapid exhaustion of valuable network resources such as wireless bandwidth and battery power. In this paper, a simple optimization technique for efficient route discovery is proposed. The technique proposed herein is location-based and can be used in conjunction with the existing Location-Aided Routing (LAR) scheme to further reduce the route discovery overhead. A unique feature of our technique not found in LAR and most other protocols is the selective use of unicast instead of broadcast for route request/query transmission made possible by a novel reuse of routing and location information. We refer to this new optimization as the UNIQUE (UNIcast QUEry) technique. This paper studies the efficacy of UNIQUE by applying it to the route discovery of the Dynamic Source Routing (DSR) protocol. In addition, a comparative study is made with a DSR protocol optimized with only LAR. The results show that UNIQUE could further reduce the overall routing overhead by as much as 58% under highly mobile conditions. With less congestion caused by routing traffic, the data packet delivery performance also improves in terms of end-to-end delay and the number of data packets successfully delivered to their destinations.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.2
• /
• pp.24-30
• /
• 2010

In this study, numerical experiments were carried out to estimate the SCR De-NOx performance in DOC plus SCR systems. The SCR De-NOx phenomena are described by Langmuir-Hinshelwood reaction scheme. After validating the present approach by comparing the present results with the experimental results, such various parameters as space velocity, $H_2O$ concentration, $NO_2$/NOx ratio and relative volume of DOC are explored to increase the SCR De-NOx performance. The results indicate that SCR De-NOx performance largely depends on space velocity and $NO_2$/NOx ratio, especially below $200^{\circ}C$. SCR De-NOx performance is seriously affected by relative volume of DOC with SCR due to increasing in $NO_2$/NOx ratio at below $250^{\circ}C$.

• Structural Engineering and Mechanics
• /
• v.59 no.3
• /
• pp.503-526
• /
• 2016

In-plane and out-of-plane free vibration analysis of Timoshenko curved beams is addressed based on the isogeometric method, and an effective scheme to avoid numerical locking in both of the two patterns is proposed in this paper. The isogeometric computational model takes into account the effects of shear deformation, rotary inertia and axis extensibility of curved beams, and is applicable for uniform circular beams, and more complicated variable curvature and cross-section beams as illustrated by numerical examples. Meanwhile, it is shown that, the $C^{p-1}$-continuous NURBS elements remarkably have higher accuracy than the finite elements with the same number of degrees of freedom. Nevertheless, for in-plane or out-of-plane vibration analysis of Timoshenko curved beams, the NURBS-based isogeometric method also exhibits locking effect to some extent. To eliminate numerical locking, the selective reduced one-point integration and $\bar{B}$ projection element based on stiffness ratio is devised to achieve locking free analysis for in-plane and out-of-plane models, respectively. The suggested integral schemes for moderately slender models obtain accurate results in both dominated and non-dominated regions of locking effect. Moreover, this strategy is effective for beam structures with different slenderness. Finally, the influence factors of structural parameters of curved beams on their natural frequency are scrutinized.

• Journal of KIISE
• /
• v.42 no.12
• /
• pp.1495-1502
• /
• 2015

Data compression involves a trade-off between delay time and data size. Greater delay times require smaller data sizes and vice versa. There have been many studies performed in the field of wireless sensor networks on increasing network life cycle durations by reducing data size to minimize energy consumption; however, reductions in data size result in increases of delay time due to the added processing time required for data compression. Meanwhile, as energy generation occurs periodically in solar energy-based wireless sensor networks, redundant energy is often generated in amounts sufficient to run a node. In this study, this excess energy is used to reduce the delay time between nodes in a sensor network consisting of solar energy-based nodes. The energy threshold value is determined by a formula based on the residual energy and charging speed. Nodes with residual energy below the threshold transfer data compressed to reduce energy consumption, and nodes with residual energy above the threshold transfer data without compression to reduce the delay time between nodes. Simulation based performance verifications show that the technique proposed in this study exhibits optimal performance in terms of both energy and delay time compared with traditional methods.