• Economic and Environmental Geology
• /
• v.34 no.4
• /
• pp.417-422
• /
• 2001

Sutfactants may be used in remediation of subsoil and aquifer contaminated with hydrophobic compounds. The objectives of this study were to select potentially suitable sUlfactants that solubilize toluene present as a contaminant and to determine the effectiveness of toluene removal from Ottawa sand by the selected surfactants. Material used as the model soil was Ottawa sand and the organic used as model contaminant was toluene. Used experimental methods were separatory funnel experiment and shaker table agitation/centrifugation experiments. Based on the experimental results, the following conclusions were drawn; t) In the surfactant selection, six different surfactants were chosen based on surfactant types, toxicity, and water solubility. These six were focused into two on the basis of HLB and surface tension study, separatory funnel experiment, shaker table and centrifugation experiments. The two most suitable surfactants were Sandopan JA36 (an anionic surfactant), and Pluronic L44 (a non-ionic surfactant). 2) In the shaker table agitation and centrifugation experiments, the highest recovery of the toluene was 96% which was obtained with one surfactant wash plus two water rinses using an anionic surfactant (Sandopan JA36).

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2005.10a
• /
• pp.131-132
• /
• 2005

• Journal of Soil and Groundwater Environment
• /
• v.13 no.3
• /
• pp.8-14
• /
• 2008

The effects of surfactant types and the ratio of nonionic and anionic surfactants on the washing of diesel contaminated soil were investigated. In batch tests, the nonionic surfactant, which has HLB within 12-13, showed a high diesel removal efficiency and Tergitol 15-S-7 (T15S7) with 20 g/L concentration exhibited the highest removal efficiency of 79-88% among the tested nonionic surfactants. Anionic surfactants, in general, showed lower removal efficiency than nonionic surfactants. In case of mixed surfactant system, the removal efficiency increased with nonionic surfactant concentration. With mixed surfactants of T15S7 and SDS as 3 : 1 ratio, diesel removal was enhanced to 76% with 10 g/L of the mixed surfactants. These results could be used in the selection of proper surfactants for remediation of diesel contaminated soils.

• Journal of the Korean Geotechnical Society
• /
• v.39 no.11
• /
• pp.63-70
• /
• 2023

Underground carbon dioxide (CO₂) storage emerges as a pivotal strategy for mitigating atmospheric CO₂ emissions and addressing global warming concerns. This study investigates techniques to optimize storage efficiency in aquifers, which stand out for their superior capacity compared to other geological layers. The focus is on the application of nonionic and anionic surfactants to enhance CO₂ storage efficiency within confined spaces. A specialized micromodel facilitating fluid flow observation was employed for the evaluation. Experimental results revealed a noteworthy minimum 40% increase in storage efficiency at the lowest injection rate when utilizing nonionic and anionic surfactants, in comparison to pure water injection. Interestingly, no significant variations in storage efficiency were observed based on the ionicity and concentration of the surfactants under investigation. These findings have implications for guiding the selection and concentration determination of surfactants in future underground CO₂ storage endeavors.

• Journal of Soil and Groundwater Environment
• /
• v.21 no.5
• /
• pp.1-7
• /
• 2016

The removal of non-aqueous phase liquids (NAPLs) from groundwater using pure water, via pump and treat, is quite ineffective due to their low solubility and hydrophobicity. Therefore, the objectives of pilot tests were to select potentially suitable surfactants that solubilize tetrachloroethylene (PCE) and trichloroethylene (TCE) present as contaminants and to evaluate the optimal range of process parameters that can increase the removal efficiency in surfactant-enhanced soil flushing (SESF). Used experimental method for surfactant selection was batch experiments. The surfactant solution parameters for SESF pilot tests were surfactant solution concentration, surfactant solution pH, and the flow rate of surfactant solution in the SESF pilot system. Based on the batch experiments for surfactant selection, DOSL (an anionic surfactant) was selected as a suitable surfactant that solubilizes PCE and TCE present as contaminants. The highest recovery (95%) of the contaminants was obtained using a DOSL surfactant in the batch experiments. The pilot test results revealed that the optimum conditions were achieved with a surfactant solution concentration of 4% (v/v), a surfactant solution pH of 7.5, and a flow rate of 30 L/min of surfactant solution (Lee and Woo, 2015). The maximum removal of contaminants (89%) was obtained when optimum conditions were simultaneously met in pilot-scale SESF operations. These results confirm the viability of SESF for treating PCE and TCE-contaminated groundwater.

• Journal of Korean Society on Water Environment
• /
• v.22 no.5
• /
• pp.824-830
• /
• 2006

Several tests were conducted to optimize the design parameters of ln-situ soil flushing processes for diesel contaminated soil. According to the batch extraction test for three anionic surfactants evaluation, Calgonit limiting bubble occurrence was selected for its higher oil cleaning efficiency. After optimum surfactant selection, there were many sets of column flushing test. Over 70% of BTEX was removed in this surfactant dose with 400% of soil volume. In the case of no surfactant addition flushing in column, so called "blank flushing test", BTEX removal rate was 64%. But when we reused the effluent for the cleaning solution, the removal rate was decreased to 46.9%. This result showed reabsorption of oil occurred on the soil. With the addition of Calgonit solution to the diesel contaminated column, BTEX was removed up to 98.9% during the first flushing and 99.4% for the second recirculation flushing. In microcosm tests, diesel contaminated soils were cleaned by both surfactant flushing and biological activities. In anoxic condition, nitrate was used as an electron acceptor while the surfactant and the oil were used an electron donor. BTEX removal efficiency could be achieved up to 80% by biological degradation.

• Proceedings of the Korea Crystallographic Association Conference
• /
• 2003.05a
• /
• pp.20-20
• /
• 2003

A new and simple method has been developed to synthesize highly crystalline and monodisperse maghemite (γ-Fe₂O₃) and zirconia (ZrO₂) nanocristallites. High temperature aging of metal-surfactant complex was founded to generate monodisperse nanoparticles, wherein the nuclei were prepared by the thermal decomposition of iron-oleate complex in case of iron oxide and nonhydrolytic sol-gel reaction in case of zirconia respectively. By varying the experimental conditions, in other words concentration of surfactants, kind of metal precursor, reaction temperature and so on, the diameter of spherical nanoparticles could be controlled at various size. The synthesized nanoparticles were characterized by electron diffraction, X-ray diffraction, and low- and high-resolution transmission electron microscope.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.893-895
• /
• 2009

In this paper, we described the unique and novel method to prepare two kinds of electro-active particles, black and white particles with different polarity. The surface of the particles was characterized to be uniform and clean by adopting spray dryer as a tool for genesis of particles; neither surfactants nor high dielectric medium like water was employed during particle preparation step. The other purpose of this study is to investigate the factors that contribute high driving voltage of particlebased display like QR-LPD. We extracted parameters interaction between particle and electrode, and between oppositely charged particles. Here we reported an excellent behavior of particle-based display that showed low operating voltage, high contrast ratio as high as 8:1 without scarification of quick response time. By optimizing the particle size, charge per mass, selection of external additive sets, a lower driving voltage as low as 40V for the particles with $10{\mu}m$ volume average diameter was obtained.

• Proceedings of the SCSK Conference
• /
• 2003.09b
• /
• pp.307-307
• /
• 2003

Strategies to make finished products more stable and efficacious can take advantage of formulation technologies- ingredients and techniques - to improve their delivery into the skin by both enhanced penetration and delayed release. Nanometer range particles and emulsion droplets can be formed with a selection of either silicone copolyol or conventional organic surfactants and dispersion shear rates sufficient to generate stable submicron droplets. By incorporating these into systems with biomimetic liquid crystalline gel networks in either simple or multiple phase emulsions the skin delivery can be enhanced as shown in tape stripping experiments. Such systems can stabilize labile actives, such as Vitamin C and retinol, and aid delivery. Laboratories in U.S and Europe investigated actives including green tea polyphenols, salicylic acid and methyl and benzyl nicotinate.

• Journal of Soil and Groundwater Environment
• /
• v.8 no.1
• /
• pp.1-8
• /
• 2003

Three different surfactants, APG, Brij30, and SDS, were tested to study the characteristics of sorption on soil surfaces, washing ability, biodegradability, and electrokinetic removal. Kaolinite and phenanthrene were selected as a model soil and a representative HOC, respectively. Phenanthrene was sorbed on kaolinite up to 2,200 mg/kg dry soil. The APG, Brij30, and SDS were sorbed on soil to 40, 7, and 4g/kg soil, respectively. The washing ability of phenanthrene was in order of Brij30＆gt;SDS＆gt;APG. The biodegradability tested with sludge was in order of APG＆gt;Brij30＆gt;SDS. In the electrokinetic test, the highest removal efficiency was obtained with APG that exhibited the highest electroosmotic flow. To increase the removal efficiency of HOC in the electrokinetic remediation, the most important factor was the selection of surfactant which maximized the electroosmotic flow.