• 대한디지털의료영상학회논문지
• /
• 제13권2호
• /
• pp.63-69
• /
• 2011

Table strapis patient fixture for securing the patient movements and falls. if it designed to measure the abdominal circumference and used as an indicator of dose selection at CT scan. it will prevent the overexposure of dose without degradation of image quality and efficiently manage dose of each type of body to technician to deal with CT. First, in order to compare the dose used in CT image and qualitative characteristics. reference image is obtained by examining the abdominal phantom in same conditions with the hospital 120 kVp, 200 mAs, D-Dom (Dynamic Dose Of Modulation). SNR, PSNR, RMSE, MAE, CTDIvol of CT images are compared with reference image. for comparing with reference image, the image that Umbilicus level image of Abdomen CT is stored in the PACS were used. For comparison, the top 12 o'clock portion of the air drawn from the same ROI was measured. CTDIvol, mAs, etc. In order to analyze the characteristics of the image, by measuring the length of the umbilicus circumference, pattern of the dose was analyzed. by using the analyzed perimeter and dose information, To be identified visually, fixed band that scale marked were produced. Use them, If the length of circumference of less than 60 cm 100 mAs, Case of 61~80 cm 120 mAs, Case of 80~100 cm 150 mAs, more than 100 cm 200 mAs, dose selection based on the perimeter, the image was applied. by compare analyzed with the Reference Image, image quality was assessed. by compare with existing tests that equally 200 mAs applied, How much was confirmed that the dose reduction. 1. Depending on the Abdominal circumference, the average PSNR(dB) of the image that differently dose applied was 45.794. 2. Comparing with existing test. the dose of scan that adjusted the mAs depending on the circumference was decreased about 40%. SNR and PSNR of the image that obtained by adjusting the standard mAs based on dose modulation were not much different. Therefore, By choosing a low mAs. dose reduction can be obtained. and the dose selection method that measured Abdominal circumference using a fixed band can protect the overexposure and uniformly apply dose of each type of body to technician to deal with CT.

• 한국의류학회지
• /
• 제45권1호
• /
• pp.123-135
• /
• 2021

This study provides basic information for the convenient size selection of T-shirts in an online purchasing environment. The best preferred T-shirts fit was selected among five sizes of T-shirts according to body size group. The subjects were 103 students majoring in clothing. After setting a virtual model with her own body sizes, the subjects chose the best preferred fit among five sizes of T-shirts that included the one suitable to their bust circumference, two smaller T-shirts and two larger T-shirts. As a result, they preferred the fit of larger size T-shirts than body size, but they preferred a different fit by the body characteristic group such as waist height group and hip circumference group. T-shirt length was affected by waist height; in addition, shoulder ease was affected by hip circumference and bust circumference. Therefore waist height and hip circumference should be considerable sizes when consumers choose T-shirts sizes with a preferred fit.

• Asian-Australasian Journal of Animal Sciences
• /
• 제7권3호
• /
• pp.435-440
• /
• 1994

Postweaning performance data were obtained on 401 group fed purebred Angus calves from 24 selected sires (12 high and 12 low feed conversion sires) from 1983 through 1986 at the Northwestern Branch of the Ohio Agricultural Research and Development Center. The objective of this study was to determine the interrelationships between body measurements and 140-d feed conversion (feed/gain) adjusted for maintenance (ADJFC), 140-d feed conversion unadjusted for maintenance (UNADFC) and feed conversion measured until progeny reached 8.89 mm of backfat (FC). Variables measured at the completion of the 140-d postweaning period included hip peight (HH), chest depth (CD), chest width (CW), head width (HDW), head length (HDL), heart girth (HG), muzzle circumference (MC), backfat thickness (BF), length between hooks aod pins (HOPIN) and length between shoulder and hooks (SHHO). Measurements were taken from progeny born from 1983 through 1986 for HH and BF, while others, except chest measurements (CD and CW), which were available only in 1985, were taken from progeny born in 1985 and 1986. Negative phenotypic correlations were found for UNADFC, ADJFC and FC. respectively, with HG (-0.76, -0.65 and -0.85), HOPIN (-0.05, -0.28 and -0.09), HDL (-0.63, -0.66 and -0.57), MC (-0.12, -0.35 and - 0.25), HH (-0.38, -0.29 and -0.001), BF(-0.29, -0.31 and -0.12) and CW (-0.03, -0.35 and -0.58). In general, fatter animals with larger HG, longer HDL and greater MC had better feed conversion.

• Asian-Australasian Journal of Animal Sciences
• /
• 제17권5호
• /
• pp.693-699
• /
• 2004

Live animal selection programs that favor animals with a minimum amount of carcass fat are used for improving breeding flocks of sheep. To predict carcass characteristics of live sheep using body measurements in breeding flocks, 200 male and female lambs of two fat-tailed Iranian sheep breeds (Moghani and Makui) were used. Depth of soft tissue over the 12th rib of the live animals was measured with ultrasound (ULGR) and with hypodermic needle (NGR). The height at withers (HW), body length (BL), circumference of heart girth (CH) and width of hooks (WH), were measured. All animals were slaughtered; carcasses were cut into joints and dissected. Breed had a significant effect on all of the live easurements. The Moghani breed showed a higher value for HW, CH, ULGR and NGR, compared to that of Makui. Except for soft tissue depths; ULGR, NGR and GR, the male lambs showed higher values in live and carcass measurements than females. Percentages of carcass, total fat and intermuscular fat in females were higher than that of male lambs. In spite of the higher amount of subcutaneous and intermuscular fat in female (which is usually used for their physiological need, such as pregnancy and lactation), the male lambs had a heavier fat-tail than females. There was a wide range of variation of percentage of total carcass fat and total chemical fat content of carcass in the two breeds. Eventually this wide variation could be use by animal breeders for selection of animals with a lesser amount of carcass fat. Live weight of lambs showed a relatively low correlation with percentage of carcass lean, total fat and subcutaneous and intermuscular fat. Total lean meat was predicted with relatively high coefficients of determination in the two breeds ($R^2$=0.61 and 0.89, respectively). Live weight and carcass traits were predicted using simple measurements, but with $R^2$ ranging from 0.53 to 0.93.

• 수산해양교육연구
• /
• 제8권1호
• /
• pp.41-47
• /
• 1996

우리 나라 주변해역의 새로운 어업질서의 개편과 국제어업환경의 변화에 대처하기 위하여 다획을 위한 어구어법의 발전적 모색에서부터 선택적어업기술과 이와 관련한 연구가 보다 많이 요구되고 있으며, 우리 나라와 같이 원양어업을 대상으로 급진적으로 성장해 온 어업국은 연근해어업의 중요성이 새롭게 제고되고 있다. 본 연구에서는 1991년 6월부터 1992년 12월중에 시험조업기간을 통해 어획된 홍치를 대상으로 망목선택성을 분석하였다. 그 결과를 요약하면 다음과 같다. 1. 전장과 체고의 관계식은 BH=0.2562TL+2.9628, 전장과 체위의 관계식은, BG=0.6204TL+8.6402, 전장과 체중의 성장관계식은 $BW=7.34{\times}10^{-5}TL^{2.6956}$이었다. 2. 시험끝자루의 망목내경이 51.2mm, 7.02mm, 77.6mm 및 88.0mm에서 50% 선택체장과 선택계수는 각각 94.8mm, 1.85; 159mm, 2.27 ; 204mm, 2.09 ; 217.3mm, 2.18이었다. 3. 망목의 내경이 51.2mm, 88.0mm 끝자루의 범위내에서 규준곡선의 기울기와 절편은 각각 2.70, -5.7이었으며, 선택계수는 2.11이었다.

• 농업과학연구
• /
• 제41권3호
• /
• pp.229-236
• /
• 2014

This study presents the estimates of heritabilities of body measurement traits and carcass traits, and genetic and phenotypic correlations of those traits for crossbred pigs in Korea. Body and ultrasound (A mode: Piglog 105) measurements in 221 pigs including body weight, length, height and width, three back fat thickness at the points of 4th, 14th rib and chine bone, eye muscle area and lean meat percent were collected at the ages of 70, 145 and 180 days and then slaughtered to measure carcass weight, back fat, belly, collar butt, spare rib, picnic shoulder, hind leg, loin, tenderloin, lean meat yield and intramuscular rough fat content in loin. Genetic analysis was done using a multi-trait animal model. Heritabilties of the body measurements were ranged from 0.331 to 0.559 and three measurements of back fat thickness were also high as range varying from 0.402 to 0.475 for the ages of 145 and 180 days. However, eye muscle area was moderate (0.296) at the age of 180 days. Heritabilities of retail cut yields were also high as ranged from 0.387 to 0.474 and of IMF content in loin was 0.499. Heritabilities of the cut percent traits were ranged from 0.249 to 0.488. Important positive genetic and phenotypic correlations were noted for all carcass yield traits (0.298 to 0.875 and 0.432 to 0.922, respectively). IMF showed low negative genetic correlations with carcass yield traits, such as carcass weight, picnic shoulder, hind leg, loin, tenderloin and lean meat yield whereas low positive genetic correlations with back fat, belly, collar butt and spare rib. Loin, tenderloin and lean meat percent showed negative genetic correlations with carcass weight, back fat thickness, collar butt, spare rib and picnic shoulder percent. The four body measurements at the ages of 70, 145 and 180 days had positive genetic correlations with belly, shoulder butt, spare rib, picnic shoulder and hind leg percent, but negative genetic correlations were shown with loin and tenderloin percent except body measurements at 70 days. The results suggest that carcass yield are negatively correlated with intramuscular fat content, which is a major factor deciding pork quality and the yield of loin and tenderloin are not increased as much as increase in body size. However, the proportions of belly and collar butt are increased with the body size. In conclusion, selection strategy should be designed according to the preference on composition of carcass in each country.

• 한국수산과학회지
• /
• 제54권6호
• /
• pp.974-981
• /
• 2021

The aim of this study was to evaluate genetic parameters of growth traits for improving selective breeding in olive flounder Paralichthys olivaceus produced in April 2019. The total length and body weight at 11-, 18-, and 22-months-old were measured for 7,479, 2,831 and 1,904 individuals, respectively. Since 2004, we have been conducting a selective breeding program to improve growth traits in the olive flounder. Data were analyzed using the restricted maximum likelihood method using the multiple traits animal model. The effect of sex and production period showed significant differences in all traits (P<0.05). The heritability of all traits was 0.428-0.520, which is relatively high by measurement month. Therefore, it is considered that individual selection will be more advantageous than family selection. However, to maintain an appropriate degree of inbreeding and genetic diversity for future generations, it is necessary to consider family selection adequately. Results of the correlation analysis between the same traits according to the measurement period indicated that considering production costs such as feed cost, selection at 18-months-old will be advantageous. Olive flounder is a major aquaculture species in Korea, and continuous selective breeding research is essential to improve productivity.

• Animal Bioscience
• /
• 제37권3호
• /
• pp.419-427
• /
• 2024

Objective: The objective of this study was to obtain (co) variance components and genetic parameter estimates for post-weaning body measurements such as body length (BL), height at withers (HW), and chest girth (HG) recorded at six (SBL, SHW, and SHG), nine (NBL, NHW, and NHG) and twelve (YBL, YHW, and YHG) months of age along with yearling weight (YW) in Nellore sheep maintained at livestock research station, Palamaner, Andhra Pradesh, India and also the association among body measurements with YW was studied. Methods: Data on 2,076 Nellore sheep (descended from 75 sires and 522 dams) recorded between 2007 and 2016 (10 years) were utilized in the study. Lambing year, sex of lamb, season of lambing and parity of dam were included in the model as fixed effects and ewe weight was kept as a covariate. Analyses were conducted with six animal models with different combinations of direct and maternal genetic effects using restricted maximum likelihood procedure. Best model for each trait was determined based on Akaike's information criterion. Results: Moderate estimates of direct heritability were obtained for the studied traits viz., BL (0.02 to 0.24), HW (0.31 to 0.49), and CG (0.08 to 0.35) and their corresponding maternal heritability estimates were in the range of 0.00 to 0.07 (BL), 0.13 to 0.17 (HW), and 0.07 to 0.13 (CG), respectively. Positive direct genetic and phenotypic correlations among the traits and they ranged from 0.07 (YBL-YW) to 0.99 (SBL-SHG, SHG-YW, and NBL-YBL) and 0.01 (SBL-YBL) to 0.99 (NBL-NHG), respectively. Further, the genetic correlations among all the body measurements and YW were positive and ranged from 0.07 (YW and YBL) to 0.99 (YW and SHG). Conclusion: There was a strong association of chest girth at six months with YW. Further, it is indicated that moderate improvement of post-weaning body measurements in Nellore sheep would be possible through selection.

• 수산해양기술연구
• /
• 제28권4호
• /
• pp.371-379
• /
• 1992

In order to analyse the mesh selectivity for the trawl net, the fishing experiment was carried out by the training ship Saebada in the southern Korea Sea and the East China Sea from June 1991 to August 1992. The trawl net used in experiment has the trouser type of cod-end with cover net, and the mesh selectivity was examined for the five kinds of the opening mesh size in its cod-end part. The selection curves and the selection parameters were calculated by using a logistic function, S=1/(1+exp super(-(aL+b))), and in this case, a and b are the selection parameters and L is the body length of the target species of fishes. In this report, the four species of aquatic animals were analysed because the catch data were enough to calculate normally the selection curves and the selection parameters, and the results obtained are summarized as follows: 1. Trachurus japonicus; Selection parameters a and b in each cases of the opening mesh size of 51.2mm, 70.2mm, 77.6mm, 88.0mm and 111.3mm were respectively 0.5050 and -5.4283, 0.3018 and -4.9590, 0.3816 and -7.3659, 0.2695 and -5.7958, 0.2170 and -5.1226. 2. Photololigo edulis ; Selection Parameters a and b in each cases of the former mesh sizes were respectively 0.7394 and -6.1433, 0.3389 and -4.2366, 0.3286 and -5.1002, 0.2543 and -5.0049, 0.1795 and -4.8040. 3. Trichirus lepturus; Selection curves in the opening mesh size of 111.3mm was calculated unnormally. The selection parameters in the other opening mesh sizes were respectively 0.3790 and -5.2891, 0.2071 and -4.9164, 0.1292 and -3.1733, 0.1153 and -3.8497 in the order of former mesh sizes except 111.3mm. 4. Todarodes pacificus ; Selection curve in case of the opening mesh sizes, 70.2mm and 111.3mm were calculated unnormally. In the order cases of the opening mesh sizes, the selection parameters were respectively were 0.5766 and -6.0169, 0.3735 and -5.4633, 0.2771 and -5.7718 in the order of former mesh sizes except 70.2mm and 111.3mm.

• 수산해양기술연구
• /
• 제43권3호
• /
• pp.169-175
• /
• 2007

To examine the mesh selectivity and optimum mesh size of gill nets for silver promfret Pampus argenteus, the field experiments were carried out during June 27th to July 3rd, 2005 at the coastal area of Imja island. The experimental gill nets for silver promfret were used in two set, which one set was consisted of 12 sheets, and each set was connected alternatively four defferent sheets those were 141mm, 148mm, 155mm and 164mm in mesh size. The analysis of mesh selectivity curve was done by Kitahara's method. The total number of fishes caught by experimental fishing of gill nets for silver promfret was 1,409, and it was consisted of 1,022 silver promfrets(72.5%), 123 croakers(8.7%), 70 red tongue soles(5.0%), 67 blue crabs(4.8%), 22 red seabreams(1.6%), and 105 other fishes(7.4%). The number of fishes caught by the mesh size was 244 at mesh 141mm(mean 6.8/sheet), 261 at mesh 148mm(mean 7.3/sheet), 295 at mesh 155mm(mean 8.2/sheet) and 222 at mesh 164mm(mean 6.2/sheet). The body weight of fishes caught by the mesh size was 102.1kg at mesh 141mm(mean 2.8kg/sheet), 112.9kg at mesh 148mm(mean 3.1kg/sheet), 132.8kg at mesh 155mm(mean 3.7kg/sheet), and 100.4kg at mesh 164mm(mean 2.8kg/sheet). The value of maximum l/m on mesh selectivity curve and the value of l/m on the selection range of 50% was estimated at 1.91 and from 1.63 to 2.23, respectively. Therefore, the optimum mesh size of gill nets for silver promfret was estimated 135mm, and the total length at the selection range of 50% was from 220mm to 301mm. But, it will be useful to use the mesh size of gill nets which is about 10-15% larger than the estimated optimum mesh size of gill nets considering the number of fishes caught, body length and body weight etc.