• Microbiology and Biotechnology Letters
• /
• v.30 no.1
• /
• pp.68-72
• /
• 2002

To obtain a yeast mutant with high RNA content and high growth rate, Saccharomyces cerevisiae MTY62 was mutated with ethylmethane sulfonate. Among the selected mutants that were sensitive to the high concentration of KCl, M40-10 strain was finally selected due to its rapid cell growth and high RNA content in the tube and baffled-flask cultures. In the batch culture of M40-10 mutant, the maximum specific growth rate ($\mu_{max}$) of $0.38 h^{-1}$ , RNA concentration of 3210 mg-RNA/1, and RNA content of 183 mg-RNA/g-DCW were obtained, which were 23%, 15%, and 12% increased levels, respectively, compared to those of MTY62 parent strain. The intermittent fed-batch culture of M40-10 strain resulted in the maximum cell concentration of 35.6 g-DCW/1, RNA concentration of 5677 mg/1, and RNA content of 160 mg-RNA/g-DCW. Through the constant fed-batch culture, the maximum cell concentration of 46.4 g-DCW/1, RNA concentration of 6270 mg-RNA/1, and RNA content of 135 mg-RNA/g-DCW were obtained. At the 20 h culture time in the fed-batch cultures of M40-10 strain, the cell and RNA concentrations were increased by 30% and 10%, respectively, over the parent strain MTY62. In addition, it was also found that the accumulated RNA within the mutant cell was not degraded until the end of fed-batch cultivation, indicating that the M40-10 cell is a mutant with weak acidic RNase activity.y.

• 한국생물공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.268-272
• /
• 2003

Experiments were carried out to investigate the selection of industrial medium and optimization of fermentation process for the production of erythritol by Candida magnoliae SR101. In the batch fermentation, light steep water(LSW) was the best nitrogen source for the industrial production of erythritol. For the optimization of culture condition, the batch culture was performed. When the concentration of LSW was 65 mL/L in the defined medium containing 250 g/L of glucose, 44% of erythritol yield with 110 g/L of erythritol concentration and 0.66 g/L-hr of productivity, respectively were obtained. Two-stage fed-batch culture was performed to improve the volumetric productivity of erythritol. High density cell culture in the growth stage was performed by batch type with 100 g/L glucose and 500 mL/L LSW concentration, respectively. The cell yield was 0.72 g-cell/g-glucose. Productivity of erythritol was increased and concentration of organic acids such as gluconic acid and acetic acid were decreased when initial pH of 6.5 controlled by 28% ammonia water For increasing yield of erythritol, glucose concentration in the production stage was tested. 37% of total erythritol yield with 186 g/L of erythritol concentration and 1.66 g/L-hr of erythritol productivity were obtained when 820 g of glucose powder was directly added for making up 450 g/L of glucose at production stage.

• Electronics and Telecommunications Trends
• /
• v.39 no.2
• /
• pp.93-102
• /
• 2024

As the scale of research and development (R&D) increases, countries and companies are consistently establishing R&D directions to meet strategic goals and market demands as well as roadmaps to increase efficiency through concentration and selection. However, establishing an effective roadmap and discovering promising technologies are challenging under the current numerous technological possibilities and uncertainties. The importance of discovering promising technologies to secure future technological competitiveness is recognized worldwide, and Europe, the United States, and Japan are establishing processes to identify promising future technologies and support related R&D. Methods for discovering promising future technologies can be classified into future social needs analysis, forecasting, surveys, use of expert opinions, and data analysis. We describe the types and limitations of technology roadmaps and investigate the status of domestic and foreign organizations using weak signal search through quantitative data analysis.

• Journal of Dairy Science and Biotechnology
• /
• v.14 no.1
• /
• pp.97-118
• /
• 1996

All over the world there is an increasing consumer awareness of the potential influence of various foodstuffs on our health. Today dairy products are expected to be more just food. They have to taste well, appeal and give pleasure, provide of well-being, provide specific health benefits and prevent disease. This paper reviews the different types of fermented milks and their microflora and includes recent work on yogurt, soft cheese and buttermilks, kefir and koumiss. There is considerable interest in the new health promoting products which are now available. Meanwhile during the last decade a new generation of fermented milk products containing selected intestinal bacteria has been introduced to the markets. These are discussed in the light of some recent findings on the ability to lower the blood cholesterol concentration and stimulate the immune response and also describes some fermented milk products available, selection criteria for commercial starter cultures.

• Membrane and Water Treatment
• /
• v.10 no.1
• /
• pp.39-44
• /
• 2019

LID facilities do not consider environmental factors, and due to inappropriate vegetation planting causing degradation in efficiency due to plant damage and difficulty in maintenance. Therefore, in this study, assessment of impact environmental factor by seasonal variation of chlorophyll and growth of vegetation planted in LID technologies and change of pollutant reduction were conducted. In the case of B-SJ and B-RI, growth rate decreased after summer (August), and B-MG showed steady growth until autumn (September). Chlorophyll was found to increase during spring season while it decreased during autumn season. The chlorophyll concentration was found to affect the plant growth pattern. TN reduction efficiency was highest with greater than 80% efficiency in summer, and it was analyzed that plants were identified as the main factor affecting the seasonal reduction efficiency of TN. Also, temperature and relative humidity were analyzed to affect plant growth, activity and pollutant removal efficiency. Plant type and growth pattern are considered as factors to be considered in selection of appropriate plant types in LID technologies.

• Journal of Microbiology and Biotechnology
• /
• v.12 no.1
• /
• pp.145-148
• /
• 2002

The virulence of five Verticillium lecanii strains against greenhouse whiteflies, Trialeurodes vaporariorum, was tested at various temperatures as a major environmental factor. Strain CS-626 was found to be the most durable strain at a broad temperature range, and highly virulent against greenhouse whiteflies in a detached-leaf bioassay. In a tomato plant pot experiment, the $LT_{50}\;and\;LC_{50}$ of the CS-626 strain were 6.2 days and $2.3{\times}10^6$ conidia/ml, respectively. The optimal concentration of CS-626 for successful infection was $1{\times}10^8$conidia/ml. These results indicate that the CS-626 strain of Verticillium lecanii has a strong potential for effectively controlling greenhouse whiteflies.

• Food Science and Biotechnology
• /
• v.14 no.6
• /
• pp.722-726
• /
• 2005

The use of isolated wine yeasts in winemaking processes is preferable to spontaneous fermentation. Selection criteria of wine yeast strains depend also on capacity and rate of fermentation and on alcohologenic capabilities. Our studies have described the dynamics of fermentation of wine musts by some isolated wine yeast strains of Saccharomyces genus: strains 6 and 8 of S. cerevisiae var. ellipsoideus (S. ellipsoideus) and strains 5 and 7 of S. bayanus var. oviformis (S. oviformis). All have high technological properties and all are adapted for the specific pedoclimatic conditions of some areas of Sibiu viticultural region. The selected strains were used as inocula to ferment Sauvignon, Muscat Ottonel, Rose Traminer, and Pino Gris musts in controlled laboratory conditions. It was found that higher initial oxygen concentration in must is necessary to accelerate the fermentation of all the wine yeast strains studied. In order to obtain quality wines, strains with considerable fermentative capacity, high alcohologenic capabilities, and a good conversion efficiency are recommended.

• Proceedings of the Korea Crystallographic Association Conference
• /
• 2003.05a
• /
• pp.20-20
• /
• 2003

A new and simple method has been developed to synthesize highly crystalline and monodisperse maghemite (γ-Fe₂O₃) and zirconia (ZrO₂) nanocristallites. High temperature aging of metal-surfactant complex was founded to generate monodisperse nanoparticles, wherein the nuclei were prepared by the thermal decomposition of iron-oleate complex in case of iron oxide and nonhydrolytic sol-gel reaction in case of zirconia respectively. By varying the experimental conditions, in other words concentration of surfactants, kind of metal precursor, reaction temperature and so on, the diameter of spherical nanoparticles could be controlled at various size. The synthesized nanoparticles were characterized by electron diffraction, X-ray diffraction, and low- and high-resolution transmission electron microscope.

• Nuclear Engineering and Technology
• /
• v.53 no.8
• /
• pp.2761-2766
• /
• 2021

A method for preparing "reagent" for radioactive methyliodide vapors production using an isotopic exchange reaction has been developed. Based on the obtained data of the isotopic exchange efficiency and hydraulic resistance, white fused alumina (700-840 ㎛) was selected as the carrying agent material for "reagent" production. The radioiodine isotopic exchange dependences on such parameters as temperature, gas flow velocity, and the methyliodide concentration in it were determined. Optimal conditions have been selected to achieve 85% of the isotopic exchange rate in 1 h of the experiment. The obtained data allowed to develop an approach to the test of iodine filters for nuclear power plants and to determine their efficiency.

• Journal of environmental and Sanitary engineering
• /
• v.19 no.3 s.53
• /
• pp.31-39
• /
• 2004

In order to reduce the pollution load from the livestock farms and to improve the water quality of the effluent in livestock wastewater, the electrolysis system is introduced. For the selection of optimal electrode, various combination of electrodes such as carbon, Al and Fe were examined. In this study, electrode material, electrolyte concentration, electrode distance, current density, and pH value were found to have significant effect on both pollutant removal efficiency and current efficiency in electrochemical oxidation process. After electrolysis for 90 min with carbon/Al, it was observed that COD, T-N, T-P and $NH_4^+-N$ of livestock waste-water were removed with $80\%,\;61\%,\;81\%\;and\;87\%$, respectively.