• Journal of Internet Computing and Services
• /
• v.13 no.2
• /
• pp.13-20
• /
• 2012

SLM (Selected Mapping) is an efficient PAPR (Peak-to-Average Power Ratio) reduction scheme without transmitted signal distortion in OFDM (Orthogonal Frequency Division Multiplexing) systems. However, enormous IFFTs (Inverse Fast Fourier Transforms) are needed to generate sufficient candidate OFDM signals, which cause the SLM to become quite complex. In this paper, we propose a new SLM scheme that replaces the IFFT operations with a conversion of the first candidate OFDM signal. The proposed scheme significantly reduces computational complexity, while it shows almost the same PAPR performance as the conventional SLM scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.9
• /
• pp.1710-1718
• /
• 2015

Selected mapping (SLM) is an effective scheme to reduce the peak to average power ratio (PAPR) of an orthogonal frequency division multiplexing (OFDM) system. For data recovery, the receiver needs to know the side information (SI) on the scrambling sequence selected by the transmitter. In this paper, a new SLM scheme is proposed, which can reduce implementation complexity substantially by allowing the receiver to recover the data without SI. In the proposed SLM method, the concept of virtual channel corresponding to the convolution of the multipath channel and the inverse discrete fourier transform (IDFT) of the scrambling sequence is assumed. The receiver can recover the data without SI by using the virtual channel estimated with pilot signals. It is shown by simulation that the proposed SLM has PAPR reduction and BER performances similar to the previous SLM schemes while it can reduce implementation complexity substantially.

• Journal of Advanced Navigation Technology
• /
• v.10 no.1
• /
• pp.20-25
• /
• 2006

In these days, OFDM(Orthogonal Frequency Division Multiplexing) is adopted to support high-speed data communication based on multi-path RF channel, but it has some weak point. One of those is that it has a higher PAR(peak-to-average power ratio) compared with single-carrier method. If some PAR of the transmitted signal is high, nonlinear amplitude distortion has occurred when it pass through the HPA(high power amplifier). There is a solution to prevent nonlinear distortion using higher peak power HPA, but it makes inefficiency and a cost problem. In this paper, we choose the SLM(Selected Mapping) scheme, which transmit the lowest PAR signal after OFDM symbol mapping, in various schemes reducing PAR for OFDM system. And we derived the performances of SLM method in fading channel through computer simulations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.4
• /
• pp.739-746
• /
• 2017

Orthogonal frequency division multiplexing(OFDM) systems have many advantages. However, OFDM systems are much affected by a nonlinear distortion because those systems have a high peak to average power ratio(PAPR) value. A selected mapping technology was suggested to reduce a PAPR value. The technology does not have data loss but receivers need side information to know modified phase sequence. Therefore, side information causes decreased a transmission efficiency. In this paper, we suggest a blind SLM receiver using a cross correlation technology. This receiver does not require side information. The proposed blind SLM receiver calculates sums of cross-correlation between transmitted pilot signals multiplied by each phase sequence and received pilot signals. So, this receiver detects side information which has a maximum sum cross-correlation value. We compared our proposed SLM receiver to a conventional blind SLM receiver through bit error rate(BER) and side information error rate(SIER) performances. Simulation results show that the proposed SLM receiver has improved BER and SIER performances than the conventional SLM receiver.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2005.11a
• /
• pp.1279-1282
• /
• 2005

본 논문은 초고속 전송을 위해 설계된 HCOC(High Capacity Orthogonal Code) 기술을 적용한 Multi-Code Spread Spectrum System에서 발생할 수 있는 PAPR(Peck to Average power Ratio) 문제해결을 위한 연구이다. H(HCOC)MC-SS 시스템의 PAPR 감소를 위해 기본적인 SLM(Selected Mapping) 기법을 적용하였으며, 또한 SLM 기법의 단점인 많은 계산량 감소를 위해 Recursive 방법을 적용한 Recursive SLM HMC-SS 시스템을 제안하였다. 컴퓨터 시뮬레이션을 통해 제안하는 시스템을 검증하였으며, 또한 초고속 전송을 위한 16 QAM-SS 시스템과 $4{\times}4$ HMC-SS 시스템의 성능을 비교 분석하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.11C
• /
• pp.1087-1094
• /
• 2007

In this paper, we propose a new peak-to-average power ratio (PAPR) reduction scheme of orthogonal frequency division multiplexing (OFDM) system, called a modified selected mapping (SLM) scheme, which considerably reduces the computational complexity with keeping the similar PAPR reduction performance compared with the conventional SLM scheme. The proposed scheme is analytically and numerically evaluated for the OFDM system specified in the IEEE 802.16 standard. For the OFDM system with 2048 subcarriers, the proposed scheme with 4 binary phase sequences can reduce the complex multiplications by 63.5% with the similar PAPR reduction compared with the SLM scheme with 16 binary phase sequences.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.6C
• /
• pp.444-449
• /
• 2008

Selected mapping is well-known scheme for peak to average power ratio(PAPR) reduction in orthogonal frequency multiplexing(OFDM) systems. In this paper, we proposed a new scheme for generating a set of candidate transmission sequences. In conventional SLM, candidate sequences were generated by rotating the phases of the frequency domain OFDM M-ary symbols but in proposed scheme, candidate sequences are generated by multiplying the m-sequences with data in bit format of OFDM signals. Computer simulation results show that, as compared to the conventional SLM scheme, the proposed approach has better PAPR reduction performance and especially in case of OFDM systems which has small number of subcarriers has better performance than large ones.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.2
• /
• pp.22-28
• /
• 2007

High PAPR (peak-to-average power ratio) is a major drawback of OFDM (orthogonal frequency division multiplexing) signals. In this paper, a modified SLM (selective mapping) technique that uses erasure decoding of RS (Reed-Solomon) codes is presented. At the transmitter a set of phase sequences are multiplied such that some portions of check symbols in RS-coded OFDM data blocks are phase-rotated. At the receiver, RS decoding is performed with the phase-rotated check symbols being treated as erasures. Hence, there is no need to send side information about the phase sequence selected to transmit for the lowest PAPR. In addition, the estimation process for the selected phase sequence is no longer needed at the receiver, leading to improvement in terms of complexity and performance. To evaluate the performance of this technique, the CCDF (complementary cumulative distribution function) of PAPR, the BER (bit error rate) and the decoding failure probability are compared with those of the previous SLM techniques.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.6
• /
• pp.2908-2924
• /
• 2019

Multiple input multiple output orthogonal frequency division multiplexing (MIMO-OFDM) is widely applied in wireless communication by virtue of its excellent properties in data transmission rate and transmission accuracy. However, as a major drawback of MIMO-OFDM systems, the high peak-to-average power ratio (PAPR) complicates the design of the power amplifier at the receiver end. Some available PAPR reduction methods such as selective mapping (SLM) suffer from high computational complexity. In this paper, a low-complexity SLM method based on active constellation extension (ACE) and joint space-time selective mapping (AST-SLM) for reducing PAPR in Alamouti STBC MIMO-OFDM systems is proposed. In SLM scheme, two IFFT operations are required for obtaining each transmission sequence pair, and the selected phase vector is transmitted as side information(SI). However, in the proposed AST-SLM method, only a few IFFT operations are required for generating all the transmission sequence pairs. The complexity of AST-SLM is at least 86% less than SLM. In addition, the SI needed in AST-SLM is at least 92.1% less than SLM by using the presented blind detection scheme to estimate SI. We show, analytically and with simulations, that AST-SLM can achieve significant performance of PAPR reduction and close performance of bit error rate (BER) compared to SLM scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.9C
• /
• pp.889-896
• /
• 2006

The crest factor distribution of orthogonal frequency division multiplexing (OFDM) symbol sequences is evaluated and it is shown that OFDM symbol sequences with a short period are expected to have a high crest factor. The crest factor relationship between two input symbol sequences, Hamming distance D apart is also derived. Using these two results, we propose two criteria for a phase sequence set of the selected mapping (SLM) scheme and suggest the rows of the cyclic Hadamard matrix constructed from an m-sequence as the near optimal phase sequence set of the SLM scheme.