탄성파 속도분석법은 일괄식 속도분석법과 대화식 속도 분석등 두 가지가 있다. 일괄식 속도분석법에서는 각 속도 분석점마다 셈블런스 컨투어, 슈퍼게더 및 중합 패널등을 일괄 작성하여 도면화 시킨 후 분석자가 그 도면을 보고 속도 함수를 결정하는 방법이다. 과거 유행한 전산처리 소프트웨어들이 이 방법을 사용하고 있다. 그러나 이 방법은 도면 분석시 아주 많은 수작업이 필요하고 속도분석 결과도 정밀치 못하다는 단점이 있다. 최근에는 워크스테이션의 고속 그래픽 기능을 이용한 대화식 속도분석 기술이 개발되었다. 그런데 이들 프로그램은 기존 일괄식 속도분석법과 대동소이한 내용을 그래픽 화면으로 처리할 수 있도록 함으로써 종이 절약 외에는 특별히 나아진 것이 없다. 프로그램의 주 기능은 속도 스펙트럼에서 속도점 노드를 선택하는 것이며, 입력자료에 있을 수 있는 잡음을 제거하여 다시 속도 스펙트럼을 수정하는 기능은 없다. 잡음의 제거없이 계산한 부정확한 속도 스펙트럼을 이용해서 속도 함수를 선정한다면 정밀 속도분석은 불가능할 것이다. 방대한 탄성파 탐사자료에 대한 속도분석을 신속 정확하게 수행하기 위해서는 속도 분석과 밀접한 관련이 있는 전산처리 공정들 즉, 슈퍼게더 조립, 셈블런스 계산, 동보정, 뮤트, 중합등을 동시에 지원하는 통합된 반복적 대화식 속도분석 프로그램이 필요하다. 분석 구간의 속도와 뮤트함수를 변화시켰을 때 그로부터 얻어지는 셈블런스와 동보정 및 중합을 검토하고 이러한 수정과 검토를 신속히 반복할 수 있도록 함으로써 정확한 속도분석이 가능하기 때문이다. 여기에서는 속도분석을 신속 정확하게 수행하기 위해 속도 분석과 밀접한 관련이 있는 전산처리 공정들 즉, 슈퍼게더 조립, 셈블런스 계산, 동보정, 뮤트, 중합등을 동시에 지원하는 대화식 속도분석 프로그램 xva를 작성하였다. 대화식 속도분석에서는 분석 구간의 트레이스들을 고속으로 참조해야 하는데 이를 위해 간단한 트레이스 인덱스 파일을 설계하여 사용하였다. 직접파와 굴절파등 천부 잡음을 제거하기 위한 효과적인 수단인 뮤트 함수 영역 변환법을 새로 고안하였으며, 본 프로그램은 이 기법을 이용하고 있다. 본 영 역 변환법은 기존 알려진 역동보정법과 같이 정밀 전산처리가 가능할 뿐만 아니라 동보정과 역동보정시 발생하는 자료의 내삽 오차가 없으며 계산 시간이 크게 단축되기 때문에 정밀 대화식 속도 분석에 사용 가능하다. 프로그램 xva는 28개의 소스 파일로 구성된 패키지인데 줄 수는 12,029, 단어 수는 34,990, 글자 수는 304,073이다. 프로그램 xva는 X-Window와 Motif 환경하에서 작동한다. 프로그램 메뉴는 Motif 표준 스타일에 따라 작성하였는 바 그 사용법을 간략히 기술하였다. 본 프로그램이 완성됨으로 인하여 정밀 탄성파 속도 분석이 가능하게 되었고 그 결과 가스층의 존재 여부를 직접 확인할 수 있는 AVO(Amplitude Versus Offset)단면도등의 제작에 활용할 수 있었다.
The gas hydrate exploration using seismic reflection data, the detection of BSR(Bottom Simulating Reflector) on the seismic section is the most important work flow because the BSR have been interpreted as being formed at the base of a gas hydrate zone. Usually, BSR has some dominant qualitative characteristics on seismic section i.e. Wavelet phase reversal compare to sea bottom signal, Parallel layer with sea bottom, Strong amplitude, Masking phenomenon above the BSR, Cross bedding with other geological layer. Even though a BSR can be selected on seismic section with these guidance, it is not enough to conform as being true BSR. Some other available methods for verifying the BSR with reliable analysis quantitatively i.e. Interval velocity analysis, AVO(Amplitude Variation with Offset)analysis etc. Usually, AVO analysis can be divided by three main parts. The first part is AVO analysis, the second is AVO modeling and the last is AVO inversion. AVO analysis is unique method for detecting the free gas zone on seismic section directly. Therefore it can be a kind of useful analysis method for discriminating true BSR, which might arise from an Possion ratio contrast between high velocity layer, partially hydrated sediment and low velocity layer, water saturated gas sediment. During the AVO interpretation, as the AVO response can be changed depend upon the water saturation ratio, it is confused to discriminate the AVO response of gas layer from dry layer. In that case, the AVO modeling is necessary to generate synthetic seismogram comparing with real data. It can be available to make conclusions from correspondence or lack of correspondence between the two seismograms. AVO inversion process is the method for driving a geological model by iterative operation that the result ing synthetic seismogram matches to real data seismogram wi thin some tolerance level. AVO inversion is a topic of current research and for now there is no general consensus on how the process should be done or even whether is valid for standard seismic data. Unfortunately, there are no well log data acquired from gas hydrate exploration area in Korea. Instead of that data, well log data and seismic data acquired from gas sand area located nearby the gas hydrate exploration area is used to AVO analysis, As the results of AVO modeling, type III AVO anomaly confirmed on the gas sand layer. The Castagna's equation constant value for estimating the S-wave velocity are evaluated as A=0.86190, B=-3845.14431 respectively and water saturation ratio is $50\%$. To calculate the reflection coefficient of synthetic seismogram, the Zoeppritz equation is used. For AVO inversion process, the dataset provided by Hampson-Rushell CO. is used.
More strict construction control of railway roadbeds is demanded in high speed railway system because of heavier repeated dynamic loading than conventional railways. The aim of this study is to propose a compaction control methodology of crushed-rock-soil-fills including as large particles as $200\sim300mm$ in diameter, which are easily encountered in high speed railway roadbed. Field tensity evaluation and in turn compaction control of such crushed-rock-soil-fills are almost impossible by conventional methods such as in-situ density measurements or plate loading tests. The proposed method consists of shear wave measurements of compaction specimens in laboratory and in-situ measurements of fills. In other words, compaction control can be carried out by comparing laboratory and field shear wave velocities using as a compaction control parameter. The proposed method was implemented at a soil site in the beginning and will be expanded to crushed-rock-soil-fills in future. One interesting result is that similar relationship of shear wave velocity and water content was obtained as that of density and water content with the maximum value at the optimum moisture content.
This article presents a new design of earthquake instrumentation that is suitable for quick decision-making after the seismic event at the nuclear power plant (NPP). The main objective of this work is to ensure more availability of the NPP by expediting walk-down period when the seismic wave is incident. In general, the decision-making to restart the NPP after the seismic event requires more than 1 month if an earthquake exceeds operating basis earthquake level. It affects to the plant availability significantly. Unnecessary shutdown can be skipped through quick assessments of operating basis earthquake, safe shutdown earthquake events, and damage status to structure, system, and components. Multidecision parameters such as cumulative absolute velocity, peak ground acceleration, Modified Mercalli Intensity Scale, floor response spectrum, and cumulative fatigue are discussed. The implementation scope on the field-programmable gate array platform of this work is limited to cumulative absolute velocity, peak ground acceleration, and Modified Mercalli Intensity. It can ensure better availability of the plant through integrated decision-making process by automatic assessment of NPP structure, system, and components.
SPT-Uphole method was introduced for the evaluation of near subsurface shear wave velocity (Vs) profile. In SPT-Uphole method, SPT (Standard Penetration Test) which is common in geotechnical site investigation was used as a source and several surface geophones in line were used as receivers. 1D shearwave velocity profile can be obtained in the manner of downhole method, Vs distribution map which is the triangular shape around the boring point can be developed by tomography inversion. To obtain the exact travel time information of shear wave component, a procedure using the magnitude summation of vertical and horizontal components was used based on the evaluation of particle motion at the surface. It was verified that proposed method could give reliable Vs distribution map through the numerical study using the FEM (Finite Element Method) model. Finally, SPT-Uphole method was performed and the feasibility of proposed method was verified in the field.
암석의 탄성파속도를 측정하는 방법은 암석의 공학적 특성을 나타내는 하나의 지표로서 일반적으로 인식되고 있어서 우리나라에서도 $\lower right quadrant건설\; 표준품셈\upper left quadrant$등의 암판정 기준으로서 보편적으로 사용되고 있다. 그러나 암석의 탄성파속도는 시료의 함수상태에 따라서 크게 변화하는 사실을 충분히 인식하지 못하고 있으므로 본 논문은 한국화강암에서 관찰된 변화특성을 설명한다. 국제 암반역학회에서 추천하고 있는 암석의 탄성파속도 측정방법도 역시 실험상의 어려움이 있는데, 예를 들면 암석시료의 양쪽 끝에서 탄성파가 잘 측정되도록 하기 위하여 사용되는 바셀린이 암석 시료내로 침투하는 경우가 하나의 문제점이고, 또한 암석시료가 함수됨에 따라서 시료의 체적이 팽창하는 경우에도 해석상의 어려움이 있다. 또한 서서히 함수정도를 증가시키는 경우에 암석시료내에서 탄성파속도의 변화를 관찰하여 보면 암석시료내에 존재하는 잔류응력을 파악하는 한 방법으로서도 사용될 수도 있다는 것을 알 수 있다.
탄성파 수치 모형 계산에 있어서 다양한 방법들이 개발되어 적용되었다. 최근에는 특히 탄성파 수치 모형 계산에 있어 혁신적인 방법인 SEM (Spectral Element Method)가 개발되어 사용되어 왔다. 이 방법은 지형을 자유롭게 표현하는데 있어 유연한 유한요소법의 장점에 정확성을 높인 방법이다. 일반적으로 Weak Formulation 형태의 파동방정식에 육면체 요소와 Gauss-Lobatto-Legendre 적분법을 적용한 방법이 널리 사용된다. 일반적인 SEM에서는 PML (Perfectly Matched Layer)경계조건을 적용하기 어려워 속도-응력 변분식으로 파동방정식을 변경하였다. CFS-PML (Complex frequency Shifted PML)경계조건을 ADE (Auxiliary Differential Equation)방정식으로 변경하여 속도-응력 파동방정식에 적용함으로써 분리할 필요가 없는 PML을 적용한 SEM 수치 모형 계산 알고리듬을 구현하였다. 1차원 수치모형과 3차원 수치모형 실험을 통하여 SEM에 적용한 비분리 CFS-PML이 유한경계에서 인공적으로 반사되는 반사파를 효과적으로 제거하는 것을 확인하였다.
구조물의 안정성에 대한 사회적 요구는 이를 충족시키기 위한 기술발전으로 이어지게 되었고, 지각구조를 이해하기 위해 개발된 탄성파기법도 구조물의 건전성을 평가하는 비파괴 기법으로 자리매김하게 되었다. 비파괴 탄성파기법의 핵심은 측정대상 매질의 탄성파 속도를 측정하는 것으로, 탄성파의 전파를 측정하는 센서를 필수적으로 사용하여야 한다. 기존의 탄성파기법은 접촉식 센서를 사용하기 때문에 이동중 연속시험이 불가능한 문제점이 있었고, 탄성파 시험의 효율성이 실용적 요구조건에 부합하지 못하는 한계성이 있었다. 본 연구에서는 비접촉식 센서의 일종인 보급형 마이크로폰을 센서로 활용하여 기존 탄성파 시험의 문제점을 극복하고자 하는 연구를 수행하였다. 다짐지반의 실시간 다짐품질 확인, 콘크리트 구조물의 재료강성 및 내부결함의 확인 등을 위한 표면파 시험과 공진시험 등을 마이크로폰 활용대상으로 설정하였고, 마이크로폰센서의 영향인자 연구, 실구조물에 대한 현장시험 등을 수행하였다. 이를 통하여 마이크로폰 센서의 신뢰성과 효율성을 확인할 수 있었으며, 최적의 마이크로폰 활용방안을 제안하였다.
대도시 인근의 지진 취약성이 지적되고 있는 가운데 서울에서도 지진의 발생 가능성에 대한 인식이 늘고 있다. 특히 건축문화재의 경우에는 이설이나 해체가 어려워 지진에 대한 대비가 다른 구조물에 비해 어렵다. 더욱이 지진 발생 시에 지반이 어떠한 증폭된 지진파를 주요 문화재에 전파하게 되는지를 알아보는 일은 매우 중요하다. 이러한 배경으로 본 연구에서는 서울 시내에 위치한 15개소의 문화재 지반에 대한 표면파 탐사를 통한 현장조사를 실시하여 지반 분포 및 기반암의 위치를 파악하였다. 현장조사 결과를 바탕으로 전단파 속도 분포를 위주로 입력데이터를 설정하고 일차원 지진응답해석을 실시하여 붕괴방지수준을 기준으로 지진재현주기에 따른 최고 지표가속도와 지반증폭비, 지반의 고유주기 등을 파악하였다.
탄성파 자료처리는 탄성파 자료를 분석하여 지구 내부 구조와 특성을 파악하는 기술로, 높은 컴퓨터 연산력이 요구된다. 이러한 도전 과제를 해결하기 위해 머신러닝 기술이 도입되었으며, 잡음 제거, 속도 모델 구축 등 다양한 작업에서 활용되고 있다. 그러나, 대부분의 연구는 특정 탄성파 처리 작업에 집중되어 있어 자료에 내재된 유사한 특징과 구조를 충분히 활용하지 못하는 한계가 있다. 본 연구에서는 BERT (Bidirectional Encoder Representations from Transformers) 기반의 사전학습을 위해 단일 송신원 모음에서 수신기별 시계열 자료('수신기 배열')와 동일 시간에 기록된 수신기 신호('시간 배열')를 입력 자료로 활용하는 방법을 비교하였다. 이를 위해 단층을 포함한 속도 모델에서 생성한 합성 송신원 모음 자료를 이용하여 잡음 제거, 속도 추정, 그리고 단층 확인 작업을 수행하였다. 임의 잡음 제거 작업에서는 수신기 및 시간 배열에서 모두 좋은 성능을 보였으나, 공간적인 분포 파악이 요구되는 속도 추정 및 단층 확인 작업에서는 시간 배열의 결과가 상대적으로 더 우수함을 확인하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.