• 한국해양학회지
• /
• 제27권1호
• /
• pp.66-77
• /
• 1992

태안반도 외해역에서 고해상용 천부지층 기록지상에 나타나는 조류성사퇴들 및 sand waves 발달 특징과 표층 퇴적물의 특성 결과를 조류 분포와 관련하여 사질 퇴적 물의 이동양상을 추정하였다. 조사해역에는 비대칭형 사퇴들이 북동-남서방향이 우세 한 강한 조류방향과 평행하거나 반시계방향으로 약간 빗겨지면서 길게 발달하고 있으 며 대부분의 사퇴들은 남 내지 남동쪽으로 급사면을 가지며 대략 남쪽방향으로 사층리 구조가 발달하고 있는 특징을 가진다. 현세 퇴적층은 사퇴들의 퇴적층 두께와 발달 양 상을 보여주며 분포한다. 이 결과로부터 현세 활동성사퇴들은 남동, 남 그리고 남서쪽 방향의 외해를 향해 퇴적물을 전적으로 이동시키는 것으로 해석된다. 동쪽 내지 북동 쪽의 급사면을 갖는 비대칭형 sand waves 가 수심 약 40-60 m를 보이는 일부 지역의 평탄한 해저면에 발달 분포한다. Sand waves 가 발달한 지역의 표층 퇴적물은 세립사 질 퇴적물로서 분급도가 매우 양호하게 나타나며 이들 지역의 사질 퇴적물은 동쪽 내 지 북동쪽 육지를 향해 이동되는 것으로 사료된다.

• 화약ㆍ발파
• /
• 제23권2호
• /
• pp.57-66
• /
• 2005

A major concern with blasting at surface mines is generation of ground vibration, air blast, flyrock, dust & fume and their impact on nearby structures and environment. A study was conducted at a coal mine in India which produces 10 million tonne of coal and 27 million cubic meter of overburden per annum. Draglines and shovels with dumpers carry out the removal of overburden. Detonation of 100 tonnes of explosives in a blasting round is a common practice of the mine. These large sized blasts often led to complaints from the nearby inhabitants regarding ground vibrations and their affects on their houses. Eighteen dragline blasts were conducted and their impacts on nearby structures were investigated. Extended seismic arrays were used to identify the vibration characteristics within a few tens meters of the blasts and also as modified by the media at distances over 5 km. 10 to 12 seismographs were deployed in an array to gather the time histories of vibrations. A signature blast was conducted to know the fundamental frequency of the particular transmitting media between the blast face and the structures. The faster decay of high frequency components was observed. It was also observed that at distances of 5km, the persistence of vibrations in the structures was substantially increased by more 10 seconds. The proximity of the frequency of the ground vibration to the structure's fundamental frequencies produced the resonance in the structures. On the basis of the fundamental frequency of the structures, the delay interval was optimized, which resulted into lower amplitude and reduced persistence of vibration in the structures.

• Earthquakes and Structures
• /
• 제18권2호
• /
• pp.215-222
• /
• 2020

In this paper, slit steel rubber bearing is presented as an innovative seismic isolator device. In this type of isolator, slit steel damper is an energy dissipation device. Its advantages in comparison with that of the lead rubber bearing are its simplicity in manufacturing process and replacement of its yielding parts. Also, slit steel rubber bearing has the same ability to dissipate energy with smaller value of displacement. Using finite element method in ABAQUS software, a parametric study is done on the performance of this bearing. Three different kinds of isolator with three different values of strut width, 9, 12 and 15 mm, three values of thickness, 4, 6 and 8 mm and two steel types with different yield stress are assessed. Effects of these parameters on the performance characteristics of slit steel rubber bearing are studied. It is shown that by decreasing the thickness and strut width and by selecting the material with lower yield stress, values of effective stiffness, energy dissipation capacity and lateral force in the isolator reduce but equivalent viscous damping is not affected significantly. Thus, by choosing appropriate values for thickness, strut width and slit steel damper yield stress, an isolator with the desired behavior can be achieved. Finally, the performance of an 8-storey frame with the proposed isolator is compared with the same frame equipped with LRB. Results show that SSRB is successful in base shear reduction of structure in a different way from LRB.

• 한국강구조학회 논문집
• /
• 제27권1호
• /
• pp.99-108
• /
• 2015

상하부 스플릿 T 접합부를 이용한 스마트 CFT 기둥-보 접합부는 긴결재의 직경과 체결력, 스플릿 T 형강의 기하학적 형상, 재료적 물성 특성 등의 변화에 의하여 상이한 거동특성을 나타낸다. 본 논문은 반복하중을 받는 상 하부 스플릿 T 접합부의 구조적 거동에 대해 체계적으로 수행된 3차원 비선형 유한요소 해석으로부터 얻은 결과를 제시하고 있다. 이러한 상 하부 스플릿 T 접합부는 CFT 합성골조의 변위복원 및 충분한 에너지 소산 능력을 확보하기 위하여 초탄성 성질을 갖는 형상기억합금(SMA)과 강으로 제작된 봉과 T-stub가 적용된다. 부가적인 다양한 구조적 거동은 T-stub의 두께 및 게이지 거리로 상 하부 스플릿 T 접합부의 파라미터에 대한 영향을 설명하고 있다.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2009년도 정기 학술발표대회
• /
• pp.43-50
• /
• 2009

Strong ground motion attenuation relationship represents a comprehensive trend of ground shakings at sites with distances from the source, geology, local soil conditions, and others. It is necessary to develop an attenuation relationship with careful considerations of characteristics of the target area for reliable seismic hazard/risk assessments. In the study, observed ground motions from the January 2007 magnitude 4.9 Odaesan earthquake and the events occurring in the Gyeongsang provinces are compared with the previously proposed ground attenuation relationships in the Korean Peninsula to select most appropriate one. In the meantime, a few strong ground motion attenuation relationships are proposed and introduced in HAZUS, which have been designed for the Western United States and the Central and Eastern United States. The selected relationship from the ones for the Korean Peninsula has been compared with attenuation relationships available in HAZUS. Then, the attenuation relation for the Western United States proposed by Sadigh et al. (1997) for the Site Class B has been selected for this study. Reliability of the assessment will be improved by using an appropriate attenuation relation. It has been used for the earthquake loss estimation of the Gyeongju area located in southeast Korea using the deterministic method in HAZUS with a scenario earthquake (M=6.7). Our preliminary estimates show 15.6% damage of houses, shelter needs for about three thousands residents, and 75 life losses in the study area for the scenario events occurring at 2 A.M. Approximately 96% of hospitals will be in normal operation in 24 hours from the proposed event. Losses related to houses will be more than 114 million US dollars. Application of the improved methodology for loss estimation in Korea will help decision makers for planning disaster responses and hazard mitigation.

• 한국지진공학회논문집
• /
• 제6권5호
• /
• pp.1-17
• /
• 2002

전회의 논문(Choi et al)에 이어 본 논문에서는 동해에서의 가상해저지진에 의한 지진해일의 예단적 특성을 동해에 연한 전해안에 걸쳐 논하였는데 재해를 유발시킬 수 있는 지진해일의 근원역은 공백역이론으로부터 선택되었다. 선형장파이론에 근거한 수치모형을 채택하여 28개의 선정된 자세한 단층 파라미터를 갖는 가상지진(4경우 실제지진 포함)과 단순화시킨 형태의 초기 수면형에 의한 76개 사상의 지진해일 시뮬레이션을 수행하여 전파 및 해안에서의 지진해일의 파고를 산정하는 데 적용 되었다. 결과로서 동해에 연한 전해안 전역에 전파되는 지진해일의 특성과 해안역에서의 지진해일의 파고 분포가 산정되어 지진해일 재해위험도가 상대적으로 낮은 지리적 위치를 구획화하여 제시함으로써 해안재해경감대책의 도구로서 활용될 수 있게 하였다.

• Structural Engineering and Mechanics
• /
• 제18권5호
• /
• pp.645-669
• /
• 2004

In seismic analysis of moment-resisting frames, beam-column connections are often modeled with rigid joint zones. However, it has been demonstrated that, in ductile reinforced concrete (RC) moment-resisting frames designed based on current codes (to say nothing of older non-ductile frames), the joint zones are in fact not rigid, but rather undergo significant shear deformations that contribute greatly to global drift. Therefore, the "rigid joint" assumption may result in misinterpretation of the global performance characteristics of frames and could consequently lead to miscalculation of strength and ductility demands on constituent frame members. The primary objective of this paper is to propose a rational method for estimating the hysteretic joint shear behavior of RC connections and for incorporating this behavior into frame analysis. The authors tested four RC edge beam-column-slab connection subassemblies subjected to earthquake-type lateral loading; hysteretic joint shear behavior is investigated based on these tests and other laboratory tests reported in the literature. An analytical scheme employing the modified compression field theory (MCFT) is developed to approximate joint shear stress vs. joint shear strain response. A connection model capable of explicitly considering hysteretic joint shear behavior is then formulated for nonlinear structural analysis. In the model, a joint is represented by rigid elements located along the joint edges and nonlinear rotational springs embedded in one of the four hinges linking adjacent rigid elements. The connection model is able to well represent the experimental hysteretic joint shear behavior and overall load-displacement response of connection subassemblies.

• 한국지진공학회논문집
• /
• 제14권4호
• /
• pp.49-60
• /
• 2010

구조부재와 구조시스템의 실제 비탄성 이력거동은 완만한 형태를 나타낸다. 완만한 곡선형 이력거동이 이선형 또는 분할선형 강성저하모델등에 비하여 실제 거동을 정확하게 나타낸다. 내진설계에서 강도감소계수는 탄성 거동만 허용한 경우에 요구되는 강도를 설계수준의 강도로 감소시키는데 사용된다. 강도감소계수에 대한 완만한 곡선이력거동의 영향을 근거리 지진과 원거리 지진을 받는 몇 가지 완만한 곡선이력 시스템에 대하여 평가하였다. 설계 목적을 위하여 이력거동의 완만정도와 근거리와 원거리 지진으로 대변될 수 있는 지진특성을 고려하는 간단한 강도감소계수 식을 제안하였다. 본 연구의 제안식에 의한 강도감소계수가 기존의 제안식에 의해 평가된 강도감소계수보다 비탄성 응답스펙트럼 해석으로부터 직접적으로 구한 강도감소계수에 근접한 결과를 나타낸다.

• Structural Engineering and Mechanics
• /
• 제9권3호
• /
• pp.241-256
• /
• 2000

The major sources of energy dissipation in steel frames with partially restrained (PR) connections are evaluated. Available experimental results are used to verify the mathematical model used in this study. The verified model is then used to quantify the energy dissipation in PR connections due to hysteretic behavior, due to viscous damping and at plastic hinges if they are formed. Observations are made for two load conditions: a sinusoidal load applied at the top of the frame, and a sinusoidal ground acceleration applied at the base of the frame representing a seismic loading condition. This analytical study confirms the general behavior, observed during experimental investigations, that PR connections reduce the overall stiffness of frames, but add a major source of energy dissipation. As the connections become stiffer, the contribution of PR connections in dissipating energy becomes less significant. A connection with a T ratio (representing its stiffness) of at least 0.9 should not be considered as fully restrained as is commonly assumed, since the energy dissipation characteristics are different. The flexibility of PR connections alters the fundamental frequency of the frame. Depending on the situation, it may bring the frame closer to or further from the resonance condition. If the frame approaches the resonance condition, the effect of damping is expected to be very important. However, if the frame moves away from the resonance condition, the energy dissipation at the PR connections is expected to be significant with an increase in the deformation of the frame, particularly for low damping values. For low damping values, the dissipation of energy at plastic hinges is comparable to that due to viscous damping, and increases as the frame approaches failure. For the range of parameters considered in this study, the energy dissipations at the PR connections and at the plastic hinges are of the same order of magnitude. The study quantitatively confirms the general observations made in experimental investigations for steel frames with PR connections; however, proper consideration of the stiffness of PR connections and other dynamic properties is essential in predicting the dynamic behavior.

• 전산구조공학
• /
• 제4권3호
• /
• pp.89-97
• /
• 1991

본 논문은 지진발생시 빌딩프레임상의 각 부재의 흡수에너지율이 일정하도록 유도하는 다시말하면 각각의 부재의 손상지수값이 고루게 분포토록 하는 새로운 설계법인 손상제어 전산설계법의 유용성을 입증코져 하는 것이다. 이를 위하여 우선 사용된 기본적인 이력모델 및 손상모델의 정확성을 평가하기 위하여 one-bay one-stody 프레임의 실험적인 하중-변위곡선을 해석적으로 재생하여 비교분석하였다. 그리고 본 설계법을 각종 프레임에 적용한 결과 1) 구조물의 특징 및 사용된 지진형상에 관계 없이 손상제어 설계된 프레임은 일반적으로 종래의 방법으로 설계된 프레임보다 같은 지진하중하에서 더 작은 손상값으로 저항하였으며, 2) 손상제어 설계된 프레임의 하층부 부재들은 더 큰 항복강도를 나타내는 현상을 보였으며 상층부 부재들은 반대 현상을 보였다.