• 한국수소및신에너지학회논문집
• /
• 제22권5호
• /
• pp.686-698
• /
• 2011

Mathematical models for char-slag interaction and near-wall particle segregation developed by Montagnaro et. al. were applied to predict various aspects of coal gasification in an up-flow entrained gasifier of commercial scale. For this purpose, some computer simulations were performed using gPROMS as the numerical solver. Typical design parameters and operating conditions of the commercial gasifiers were used as input values for the simulation. Development of a densely dispersed phase of solid carbon was found to have a critical effect on both carbon conversion and ash flow behavior. In general, such a slow-moving phase was turned out to enhance carbon conversion by lengthening the residence time of char or soot particles. Furthermore, it was also found that guiding the transfer of char or soot into the closer part of the wall to coal burner is favorable in terms of gasification efficiency and vitrified ash collection. Finally, to a certain degree densely dispersed phase of carbon showed an yield-enhancing effect of syngas.

• 농업생명과학연구
• /
• 제46권6호
• /
• pp.1-8
• /
• 2012

본 시험은 한국 고추 육종에 이용되는 교배친의 고추맛에 관여하는 유전자의 유전가를 구명하기 위해 수행하였다. 고추맛과 원예적 특성이 상이한 '#1803'($P_1$)과 '#1532'($P_2$) 두 교배친을 교배하여 이들의 $F_1$, $F_2$ 세대를 본 시험의 공시 재료로 이용하였다. Partitioning method에 따라 고추맛은 A-a와 B-b 두 유효 유전자에 의하여 지배되는데 $F_1$ 세대는 우수 교배친 $P_1$보다 더 우수한 초우성 현상과 $F_2$ 세대는 초월 분리가 일부 나타났다. 고추맛의 유효 유전자 효과는 A-a 유전자에 의해 0.36, B-b 유전자에 의해 0.64가 증가하였다. 한국 고추맛은 유효 유전자간에서 0.94의 간섭효과와 최대 2.86의 제 2효과가 관여하여 복합적인 유전양식을 나타내었다.

• The Korean Journal of Physiology and Pharmacology
• /
• 제27권1호
• /
• pp.113-125
• /
• 2023

It has been reported that stressful events in early life influence behavior in adulthood and are associated with different psychiatric disorders, such as major depression, post-traumatic stress disorder, bipolar disorder, and anxiety disorder. Maternal separation (MS) is a representative animal model for reproducing childhood stress. It is used as an animal model for depression, and has well-known effects, such as increasing anxiety behavior and causing abnormalities in the hypothalamic-pituitary-adrenal (HPA) axis. This study investigated the effect of MS on anxiety or aggression-like behavior and the number of GABAergic neurons in the hippocampus. Mice were separated from their dams for four hours per day for 19 d from postnatal day two. Elevated plus maze (EPM) test, resident-intruder (RI) test, and counted glutamic acid decarboxylase 67 (GAD67) or parvalbumin (PV) positive cells in the hippocampus were executed using immunohistochemistry. The maternal segregation group exhibited increased anxiety and aggression in the EPM test and the RI test. GAD67-positive neurons were increased in the hippocampal regions we observed: dentate gyrus (DG), CA3, CA1, subiculum, presubiculum, and parasubiculum. PV-positive neurons were increased in the DG, CA3, presubiculum, and parasubiculum. Consistent with behavioral changes, corticosterone was increased in the MS group, suggesting that the behavioral changes induced by MS were expressed through the effect on the HPA axis. Altogether, MS alters anxiety and aggression levels, possibly through alteration of cytoarchitecture and output of the ventral hippocampus that induces the dysfunction of the HPA axis.

• Nuclear Engineering and Technology
• /
• 제55권11호
• /
• pp.4066-4076
• /
• 2023

Pressure resistance welding is usually used to seal the connection between the cladding tube and the end plug made of zirconium alloy. The seal welded joint has a direct effect on the service performance of the fuel rod cladding structure. In this paper, the pressure resistance welded joints of zirconium alloy tube-plug structure were obtained by thermal-mechanical simulation experiments. The microstructure and microhardness of the joints were both analyzed. The effect of processing parameters on the microstructure was studied in detail. The results showed that there was no β-Zr phase observed in the joint, and no obvious element segregation. There were different types of Widmanstätten structure in the thermo-mechanically affected zone (TMAZ) and heat affected zone (HAZ) of the cladding tube and the end plug joint because of the low cooling rate. Some part of the grains in the joint grew up due to overheating. Its size was about 2.8 times that of the base metal grains. Due to the high dislocation density and texture evolution, the microhardnesses of TMAZ and HAZ were both significantly higher than that of the base metal, and the microhardness of the TMAZ was the highest. With the increasing of welding temperature, the proportion of recrystallization in TMAZ decreased, which was caused by the increasing of strain rate and dislocation annihilation.

• 대한본초학회지
• /
• 제28권4호
• /
• pp.17-23
• /
• 2013

Objectives : The objective of the paper was to study cutting method of Gardeniae frutus, that tends to show symptom of separations in a packing, in accordance with the comparison experiment of quantification and antioxidant effect proceed with the intact Gardeniae fructus(Gf), seed of Gardeniae fructus (Gs) and the pericarp of Gardeniae fructus (Gp) separately. Methods : The Gf, Gs, and Gp were extracted using 80% MeOH, followed by quantizing geniposide contained in each group. A MTT assay was conducted and ROS generation and NO production were measured for comparing its antioxidant effect. Results : As a result of quantizing geniposide contained in the Gf, Gp, and Gs, respectively, the geniposide content was shown to be the highest in the Gs. MTT assay showed that no cytotoxicity was observed in the groups treated with Gf, Gp, and Gs, respectively, at a dose of 500 ${\mu}g/ml$. The ROS generation was shown to have more significantly decreased in the group pretreated with Gf 500 ${\mu}g/ml$ than in the group treated with LPS. The NO level was shown to have more significantly decreased in the group pretreated with Gp 500 ${\mu}g/ml$ than in the group treated with LPS. Conclusion : As the geniposide content and antioxidant effect of Gf varies according to its each part, it is recommended that Gf should be distributed as an intact form other than segregation in packing.

• 한국건설순환자원학회논문집
• /
• 제5권1호
• /
• pp.59-67
• /
• 2017

본 연구에서는 5~13mm 순환골재를 치환한 콘크리트의 현장 적용성을 평가하기 위하여 목업 시험체를 제작하여 콘크리트를 타설한 후 이들이 콘크리트의 제반특성에 미치는 영향을 실험적으로 고찰하고자 하였다. 기둥 및 벽체를 모사한 $1200{\times}800{\times}800mm$ 목업 시험체를 호칭강도 및 5~13mm 순환골재 치환율별로 7개 제작하였고, 24, 27 및 40MPa 급 호칭강도의 콘크리트에 5~13mm 순환골재 30%와 70%(24MPa만 해당)를 치환한 배합과 무치환배합을 선정하여 제조하였다. 실험항목으로 굳지않은 상태에서 슬럼프, 슬럼프플로, 블리딩을 측정하였고, 경화상태에서는 압축강도, 반발도, 코어강도 및 건조수축 길이변화율을 측정하였다. 연구결과 5~13mm 순환골재가 30% 치환된 경우 슬럼프, 슬럼프플로, 블리딩량은 플레인에 비해 향상되는 것으로 나타났고, 압축강도의 경우도 최밀 충전 효과에 기인하여 플레인보다 상승되는 것으로 나타났다. 목업 시험체의 높이별 반발도의 경우도 5~13mm 순환골재가 30%치환된 경우 상하간의 반발도차이가 감소되는 것을 알 수 있었다.

• Elastomers and Composites
• /
• 제35권1호
• /
• pp.29-37
• /
• 2000

본 연구에서는 elastomer의 기초 연구로써 두개의 침투할 수 없는 평판사이로 국한시킨 용융상태에서 두개의 다른 사슬 길이를 가진 고분자의 거동에 대한 결과를 보여 주었다. 입방 격자시뮬레이션은 reptation과 crankshaft bond flip 이동의 조합에 따른 방법으로 유도되었다. 10개의 구슬로 엮어진 544개의 짧은 사슬과 160개의 구슬로 엮어진 136개의 긴 사슬로 구성된 전체 680개의 사슬은 20개의 격자 충에 투입되었다. 공유결합으로 연결된 구슬사이의 energetic 상호인력은 없고 반면에 모든 다른 이웃들은 truncated 6-12 Lennard-Jones 포텐셜로서 상호작용하고 있다고 가정하였다. 수치모사 결과의 분석으로부터 순수한 entropic 효과로 인하여 짧은 사슬이 우선적으로 표면에 도달하는 것을 보여 주었다 또한 짧은 사슬의 질량밀도중심은 표면근처에서 최고값을 보여주었다. 이것은 긴 사슬의 경우와 상반되는 현상이다. 그러나 짧은 사슬과 긴 사슬의 segment는 결합 정렬에 있어서는 큰 변화를 주지 않았다.

• Advances in concrete construction
• /
• 제6권2호
• /
• pp.103-121
• /
• 2018

This paper reports the effects of coarse and fine recycled concrete aggregates (RCA) on fresh and hardened properties of self-compacting concrete (SCC) containing ground granulated blast-furnace slag (GGBFS) as cement replacement. For this purpose, three SCC mixes groups, were produced at a constant water to binder ratio of 0.38. Both fine and coarse recycled aggregates were used as natural aggregates (NA) replacement at different substitution levels of 0%, 25%, 50%, 75% and 100% by volume for each mix group. Each group, included 0, 15% or 30% GGBFS as Portland cement replacement by weight. The SCC properties investigated were self-compactability parameters (i.e., slump flow, T500 time, V-funnel flow time, L-box passing ability and sieve stability), compressive strength, capillary water absorption and water penetration depth. The results show that the combined use of RCA with GGBFS had a significant effect on fresh and hardened SCC mixes. The addition of both fine and coarse recycled aggregates as a substitution up to 50% of natural aggregates enhance the workability of SCC mixes, whereas the addition from 50 to 100% decreases the workability, whatever the slag content used as cement replacement. An enhancement of workability of SCC mixes with recycled aggregates was noticed as increasing GGBFS from 0 to 30%. RCA content of 25% to 50% as NA replacement and cement replacement of 15% GGBFS seems to be the optimum level to produce satisfactory SCC without any bleeding or segregation. Furthermore, the addition of slag to recycled concrete aggregates of SCC mixes reduces strength losses at the long term (56 and 90 days). However, a decrease in the capillary water absorption and water permeability depth was noticed, when using RCA mixes with slag.

• 한국재료학회지
• /
• 제21권3호
• /
• pp.161-167
• /
• 2011

The stress-strain responses and oxidation properties of cold-rolled Zr-1.5Nb-O and Zr-1.5Nb-O-S alloys were studied. The U.T.S. (ultimate tensile strength) of cold-rolled Zr-1.5Nb-O-S alloy with 160 ppm sulfur (765 MPa) were greater than that of Zr-1Nb-1Sn-0.1Fe alloy (750 MPa), achieving an excellent mechanical strength even after the elimination of Sn, an effective solution strengthening element. The addition of sulfur increased the strength at the expense of ductility. However, the ductile fracture behavior was observed both in Zr-Nb-O and Zr-Nb-O-S alloys. The beneficial effect of sulphur on the strengthening was observed in the cold rolled Zr-1.5Nb-O-S alloys. The activation volume of cold-rolled Zr-1.5Nb decreased with sulfur content in the temperature region of dynamic strain aging associated with oxygen atoms. Insensitivity of the activation volume to the dislocation density and the decrease of the activation volume at a higher temperature where the dynamic strain aging occurs support the suggestion linking the activation volume with the activated bulge of dislocations limited by segregation of oxygen and sulfur atoms. The addition of sulfur was also found to improve the oxidation resistance of Zr-Nb-O alloys.

• 한국식물학회:학술대회논문집
• /
• 한국식물학회 1995년도 제9회 식물생명공학 심포지움 식물육종과 분자생물학의 만남 The 9th Plant Biotechnology Symposium -Breeding and Molecular Biology-
• /
• pp.57-86
• /
• 1995

Molecular mapping of plant genomes has progressed rapidly since Bostein et al.(1980) introduced the idea of constructing linkage maps of human genome based on restriction fragment length polymorphism (RFLP) markers. In recent years, the development of protein and DNA markers has stimulated interest for the new approaches to plant improvement. While classical maps based on morphological mutant markers have provided important insights into the plant genetics and cytology, the molecular maps based on molecular markers have a number of inherent advatages over classical genetic maps for the applications in genetic studies and/or breeding schemes. Isozymes and DNA markers are numerous, discrete, non-deleterious, codominant, and almost entirely free of environmental and epistatic interactions. For these reasons, they are widely used in constructing detailed linkage maps in a number of plant species. Plant breeders improve crops by selecting plants with desirable phenotypes. However a plant's phenotyes is often under genetic control, positioning at different "quantitative trait loci" (QTLs) together with environmental effects. Molecular maps provide a possible way to determine the effect of the individual gene that combines to produce a quantitative trait because the segregation of a large number of markers can be followed in a single genetic cross. Using market-assisted selection, plants that contain several favorable genes for the trait and do not contain unfavourable segments can be obtained during early breeding processes. Providing molecular maps are available, valuable data relevant to the taxonomic relationships and chromosome evolution can be accumulated by comparative mapping and also the structural relationships between linkage map and physical map can be identified by cDNA sequencing. After constructing high density maps, it will be possible to clone genes, whose products are unknown, such as semidwarf and disease resistance genes. However, much attention has to be paid to level-up the basic knowledge of genetics, physiology, biochemistry, plant pathology, entomology, microbiology, and so on. It must also be kept in mind that scientists in various fields will have to make another take off by intensive cooperation together for early integration and utilization of these newly emerging high-techs in practical breeding. breeding.