• 대한의용생체공학회:의공학회지
• /
• 제43권5호
• /
• pp.341-352
• /
• 2022

Medical image segmentation is the most important task in radiation therapy. Especially, when segmenting medical images, the liver is one of the most difficult organs to segment because it has various shapes and is close to other organs. Therefore, automatic segmentation of the liver in computed tomography (CT) images is a difficult task. Since tumors also have low contrast in surrounding tissues, and the shape, location, size, and number of tumors vary from patient to patient, accurate tumor segmentation takes a long time. In this study, we propose a method algorithm for automatically segmenting the liver and tumor for this purpose. As an advantage of setting the boundaries of the tumor, the liver and tumor were automatically segmented from the CT image using the 2D CoordConv DeepLab V3+ model using the CoordConv layer. For tumors, only cropped liver images were used to improve accuracy. Additionally, to increase the segmentation accuracy, augmentation, preprocess, loss function, and hyperparameter were used to find optimal values. We compared the CoordConv DeepLab v3+ model using the CoordConv layer and the DeepLab V3+ model without the CoordConv layer to determine whether they affected the segmentation accuracy. The data sets used included 131 hepatic tumor segmentation (LiTS) challenge data sets (100 train sets, 16 validation sets, and 15 test sets). Additional learned data were tested using 15 clinical data from Seoul St. Mary's Hospital. The evaluation was compared with the study results learned with a two-dimensional deep learning-based model. Dice values without the CoordConv layer achieved 0.965 ± 0.01 for liver segmentation and 0.925 ± 0.04 for tumor segmentation using the LiTS data set. Results from the clinical data set achieved 0.927 ± 0.02 for liver division and 0.903 ± 0.05 for tumor division. The dice values using the CoordConv layer achieved 0.989 ± 0.02 for liver segmentation and 0.937 ± 0.07 for tumor segmentation using the LiTS data set. Results from the clinical data set achieved 0.944 ± 0.02 for liver division and 0.916 ± 0.18 for tumor division. The use of CoordConv layers improves the segmentation accuracy. The highest of the most recently published values were 0.960 and 0.749 for liver and tumor division, respectively. However, better performance was achieved with 0.989 and 0.937 results for liver and tumor, which would have been used with the algorithm proposed in this study. The algorithm proposed in this study can play a useful role in treatment planning by improving contouring accuracy and reducing time when segmentation evaluation of liver and tumor is performed. And accurate identification of liver anatomy in medical imaging applications, such as surgical planning, as well as radiotherapy, which can leverage the findings of this study, can help clinical evaluation of the risks and benefits of liver intervention.

• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제9권2호
• /
• pp.37-44
• /
• 2020

본 논문에서는 딥 러닝 기반의 전-자동 심장 분할 알고리즘을 제안한다. 본 논문에서 제안하는 딥 러닝 모델은 기존 U-Net에 residual recurrent convolutional block과 residual multi-dilated convolutional block을 삽입하여 성능을 개선한 모델이다. 모델의 성능은 테스트 데이터 세트를 전-자동 분할한 결과와 영상의학 전문가의 수동 분할 결과를 비교하여 분석하였다. CT 영상에서 평균 96.88%의 DSC, 95.60%의 precision과 97.00%의 recall 결과를 얻었다. 분할된 영상은 3차원 볼륨 렌더링 기법을 적용하여 시각화한 후 관찰하여 분석할 수 있었다. 실험 결과를 통해 제안된 알고리즘이 다양한 심장 하부 구조를 분할하기에 효과적인 것을 알 수 있었다. 본 논문에서 제안하는 알고리즘이 전문의 또는 방사선사의 임상적 보조역할을 수행할 수 있을 것으로 기대한다.

• 한국조경학회지
• /
• 제18권3호통권39호
• /
• pp.57-70
• /
• 1990

This study is on system building and model case study to establish a new framework of "The Wild and Scenic Rivers System" and to apply this to Korean rivers. The Wild and Scenic Rivers System of the U. S. , which had become law in 1968 for establishing wild scenic and recreational river areas, was investigated. The techniques of two American case studies about the National Wild and Scenic Rivers System designation were investigated and synthesized, and study process was adjusted to Korean river system. Additionally, pilot study was carried out by the method and results were as follows : 1) In the American Wild and Scenic Rivers System, each river was evaluated based on eligibility criteria for designation, such as remarkable scenic, recreational, fish and wildlife, cultural or other ecological values. Segmented river areas were classified into three or four grades and management plans were prepared accordingly. 2) The management of rivers in Korea has emphasized on the flood control and water resources management up to the present, and now takes a growing interest in water quality. But it has been concerned very little with wild and scenic resources conservation of river corridors. It is strongly recommended to build Wild and Scenic Rivers System in Korea for rational management and conservation of the valuable natural resource. 3) Suggested evaluation criteria for the Korean Wild and Scenic Rivers System were wildness, wildlife and plants, hydrology, scenic quality, and historical and cultural resources. The river areas may be graded into four : Positive conservation area(I), Negative conservation area(II), Negative development area(III), Positive development area(IV). Management guidelines were proposed for each grade. 4) To test the applicability of the approach, one of the major tributary of the Han-River was selected for pilot study. The result showed that the evaluation and grading system worked well. Finally, it is recommended to incorporate the Wild and Scenic Rivers System into Korean national park system, and to amend the Korean National Park Act to enable this.

• 한국통신학회논문지
• /
• 제25권8B호
• /
• pp.1424-1435
• /
• 2000

객체기반 동영상 부호화에서 고정 비트율을 얻도록 하는 율제어기는 채널의 비트율원하는 화질 객체간 분배 텍스쳐 및 형상간 관계 프레임스킵 결정 등에 적응성을 부여하기 위한 중요한 요소이다 따라서 이 논문에서는 울제어에 이용되는내용기반 제어기를 제안한다 이것은 이차 율제어 모델을 이용하는 MPEG-4 기법을 확장한 것이다. 객체간 중요성을 분석하여 VOP로 나뉘어지고 객체기반 모델링에 의해 비트가 할당된다, 중요성을 팍악하기 위해 시험 영상ㅇ을 비전문가에게 관측토록 하여 관심영역 VOP를 분석하였다 이에 의해 초기 목표치가 구해지고 오버플로우나 언더플로우를 방지하기 위해 전체 목표치를 설정한다. 객체간 목표치 분배는 움직임벡터 크기 객체의 크기 이전 프레임의 왜곡 등을 반영하는 통계적 특성에 따라 이루어짐과 동시에 객체의 중요성에 따라 분배하는 기법을 제안한다 제안한 기법을 MPEG-4 VM8 부호기에 사용된것과 비교한다.

• 마케팅과학연구
• /
• 제19권3호
• /
• pp.5-16
• /
• 2009

企业社会责任活动已被认为是提高企业形象和企业竞争力的一个潜在因素. 然而, 先前大部分关于企业社会责任活动的研究是主要针对的是这些活动如何影响影响对产品, 企业以及企业形象的评价的评价. 另外, 一些学者将消费者对企业动机的感知作为企业社会责任和消费者反应之间直接关系中的调解变量. 然而, 动机理论和相关的研究存在一些缺点. 对消费者, 企业社会责任活动只有两个动机, 但最近, Vlachos等人(2008) 认为这些动机应该细分. 因此, 它有可能从原有理论发展为修正理论模型(说服, 个人知识管理(PKM). Vlachos等人(2008) 将企业社会责任动机细分为四种类型, 并尝试发现这些动机在影响顾客种程度方面的作用以及不同. 以前的研究已经证明具有积极动机会对的社会责任活动会有积极的影响. 但并没有实证地解释其心理原因. 因此本研究的目的是双重的. 第一, 本研究试图发现顾客为什么会在他们感受到企业社会活动的积极动机的情况下表达他们的感激. 第二, 本研究试图测试当社会从企业社会责任活动中获得利益时与消费者的回报的效果. 以下是本研究的假设: H1: 企业社会责任活动的价值驱使的动机积极影响认知的对等对于互惠的期待. H2: 企业社会责任活动的参股者驱使的动机消极影响于互惠的期待认知的对等. H3: 企业社会责任活动的利己驱使的动机消极影响于互惠的期待认知的对等. H4: 企业社会责任活动的战略驱使的动机消极影响对于互惠的期待认知的对等. H5: 对企业社会责任活动的互惠的期待认知的对等积极影响消费者忠诚度. 我们选择了一个公司作为研究对象来理解企业社会责任活动的动机是如何影响消费者于互惠的期待认知的对等和顾客忠诚度. 总样本为100名受访者被选为试验测试. 此外, 为了获得一致的回复, 我们保证所有的受访者都超过20岁. 本调查中. 在排除了28份无效问卷以后, 总受访者是172名(82名男性, 90名女性). 基于截至标准, 数据和模型的适配度良好. 在观察结果以后, 企业社会责任活动的价值驱使的动机对于互惠的期待认知的对等有积极的影响(t=6.75, p<.001)，假设1被证明. Morales (2005) 也指出消费者的确感激企业对社会所做出的努力以及对社会所给予的利益. 而且企业社会责任活动的参股者驱使的动机对于互惠的期待认知的对等没有影响(t = ‐.049, p > .05). 因此, 假设2被拒绝. 我们可以用符合论来解释这个结果. 利己驱使动机(t = ‐3.11, p < .05)和战略驱使的动机(t = ‐4.65, p < .05) 对认知的对等有消极影响. 因此H3和H4被证明. 而且认知的对等积极影响消费者的忠诚度(t = 4.24, p < .05)，H5被证明. 从结果中看, 与大众群体相比，大学生更容易受利己驱动动机的影响. 以下是本研究的结论:首先, 数据分析结果显示价值驱使的动机积极影响于互惠的期待认知的对等. 但是参股者驱动的动机对互惠的期待认知的对等没有显著影响. 另外, 利己驱使的动机和战略驱使的动机消极影响互惠的期待认知的对等. 第二, 当企业社会责任活动与消费者的回报关联时, 社会责任活动积极影响顾客忠诚度. 本研究测试了动机的种类是否影响消费者对企业社会责任的反应, 尤其是企业社会责任如何能影响关键的内在因素(认知的对等) 和消费者行为的结果(顾客忠诚度). 而且, 本研究阐述了认知对等在企业社会责任动机和顾客忠诚度的关系中起到媒介的作用. 我们的研究扩展了有关消费者企业社会责任动机方面的研究, 将他们定位为消费者反应的一个直接指标. 另外一个贡献是, 我们成功地鉴定了认知的对等作为一个次级过程在归因于顾客忠诚度的企业社会责任的影响中的中介作用. 今后在研究企业社会责任的最终行为和财务影响时应该考虑源于互惠的期待认知对等的影响. 本研究的结果具有重要的管理意义. 第一, 本研究发现的对等的中心作用表明经理人应该经常考虑这些行为将创造出多少的互惠的期待认知对等. 第二, 理解消费者对企业社会责任的动机, 的认知是如何与互惠的期待认知对等和顾客忠诚度相关, 可以帮助经理人通过营销活动和管理企业社会责任‐感应归因过程来监控和提高这些消费者的结果. 本研究的结果将帮助企业去理解影响互惠的期待认知对等的四个不同的动机的相对重要性.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제2권10호
• /
• pp.713-722
• /
• 2013

본 논문에서는 깊이정보를 이용하여 케스케이드 방식에 기반한 실시간 손 영역 검출 방법을 제안한다. 실험 환경 조명 조건의 변화로부터 빠르고 안정적으로 손 영역을 검출하기 위해 깊이정보만을 이용한 특징을 제안하며, 부스팅과 케스케이드 방법을 이용한 분류기를 통해 손 영역 검출 방법을 제안한다. 먼저, 깊이정보만을 이용한 특징을 추출하기 위해 입력영상의 중심 깊이 값과 분할된 블록의 평균 깊이 값의 차이를 계산하고, 모든 크기의 손 영역 검출을 위해 중심 깊이 값과 2차 선형 모델을 이용하여 손 영역의 크기를 예측한다. 그리고 손 영역으로부터의 특징 추출을 통한 학습 및 인식을 위해 케스케이드 방식을 적용한다. 본 논문에서 제안한 분류기는 정확도를 유지하고 속도를 향상시키기 위하여 각 스테이지를 한 개의 약분류기로 구성하고 검출율을 만족하면서 오류율이 가장 낮은 임계값을 구하여 과적합 학습을 수행한다. 학습된 분류기를 이용하여 손 영역을 분류하고, 병합단계를 통해 최종 손 영역을 검출한다. 마지막으로 성능 검증을 위해 기존의 다양한 아다부스트와 정량적, 정성적 비교 분석을 통해 제안하는 손 영역 검출 알고리즘의 효율성을 입증한다.

• 대한핵의학회지
• /
• 제38권1호
• /
• pp.21-29
• /
• 2004

목적: 젊은 흡연자 및 비흡연자에서 찬물자극 후 심근혈류 예비능을 $H_2^{15}O\;PET$을 이용하여 측정한 후 비교함으로써 흡연에 의한 관상동맥 내피세포의 기능저하를 평가하고자 하였다. 대상 및 방법: 젊은 흡연자 9명($23.8{\pm}1.1$세; $6.6{\pm}2.5$ pack-years) 및 비흡연자 9명($23.8{\pm}2.9$세)에 대하여 안정상태 및 찬물자극 후, 그리고 아데노신 주입 중에 $H_2^{15}O$를 순간주사하고 동적 PET영상을 획득한 뒤, NMF 방법으로 입력 방사능곡선 및 조직 방사능곡선을 처리하여 심근혈류량을 산출하였다. 결과: 흡연자군 및 비흡연자군 사이에 심박수혈압곱 및 안정시 혈류량에는 유의한 차이가 없었다. 그러나, 찬물자극 자극 후에는 심근혈류가 흡연자군에서 비흡연자군에 비하여 유의하게 낮았으며(흡연자군 심근혈류 : $1.25{\pm}0.34$ ml/g/min, 비흡연자군 심근혈류=$1.59{\pm}0.29$ ml/g/min ; p=0.019), 특히 안정시 심근혈류에 대한 찬물자극 후의 심근혈류의 비(내피세포 기능에 의한 심근혈류의 예비능)도 흡연자에서 유의하게 낮았다(흡연자군=$90{\pm}24%$, 비흡연자군=$122{\pm}28%$ ; p=0.024). 한편, 아데노신 주입시의 심근혈류는 두군 간에 유의한 차이가 관찰되지 않았다(흡연자군 심근혈류=$5.81{\pm}1.99$ ml/g/min, 비흡연자군 심근혈류=$5.11{\pm}1.31$ ml/g/min ; p=NS). 결론: 젊은 흡연자에서 찬물자극 후에 $H_2^{15}O\;PET$을 이용하여 측정하여 산출한 심근혈류의 예비능이 젊은 비흡연자에 비하여 감소되어 있어서 흡연에 의한 관상동맥 내피세포의 기능장애를 확인할 수 있었다.

• 마케팅과학연구
• /
• 제18권3호
• /
• pp.59-88
• /
• 2008

Digital Convergence means integration between industry, technology, and contents, and in marketing, it usually comes with creation of new types of product and service under the base of digital technology as digitalization progress in electro-communication industries including telecommunication, home appliance, and computer industries. One can see digital convergence not only in instruments such as PC, AV appliances, cellular phone, but also in contents, network, service that are required in production, modification, distribution, re-production of information. Convergence in contents started around 1990. Convergence in network and service begins as broadcasting and telecommunication integrates and DMB(digital multimedia broadcasting), born in May, 2005 is the symbolic icon in this trend. There are some positive and negative expectations about DMB. The reason why two opposite expectations exist is that DMB does not come out from customer's need but from technology development. Therefore, customers might have hard time to interpret the real meaning of DMB. Time is quite critical to a high tech product, like DMB because another product with same function from different technology can replace the existing product within short period of time. If DMB does not positioning well to customer's mind quickly, another products like Wibro, IPTV, or HSPDA could replace it before it even spreads out. Therefore, positioning strategy is critical for success of DMB product. To make correct positioning strategy, one needs to understand how consumer interprets DMB and how consumer's interpretation can be changed via communication strategy. In this study, we try to investigate how consumer perceives a new product, like DMB and how AD strategy change consumer's perception. More specifically, the paper segment consumers into sub-groups based on their DMB perceptions and compare their characteristics in order to understand how they perceive DMB. And, expose them different printed ADs that have messages guiding consumer think DMB in specific ways, either cellular phone or personal TV. Research Question 1: Segment consumers according to perceptions about DMB and compare characteristics of segmentations. Research Question 2: Compare perceptions about DMB after AD that induces categorization of DMB in direction for each segment. If one understand and predict a direction in which consumer perceive a new product, firm can select target customers easily. We segment consumers according to their perception and analyze characteristics in order to find some variables that can influence perceptions, like prior experience, usage, or habit. And then, marketing people can use this variables to identify target customers and predict their perceptions. If one knows how customer's perception is changed via AD message, communication strategy could be constructed properly. Specially, information from segmented customers helps to develop efficient AD strategy for segment who has prior perception. Research framework consists of two measurements and one treatment, O1 X O2. First observation is for collecting information about consumer's perception and their characteristics. Based on first observation, the paper segment consumers into two groups, one group perceives DMB similar to Cellular phone and the other group perceives DMB similar to TV. And compare characteristics of two segments in order to find reason why they perceive DMB differently. Next, we expose two kinds of AD to subjects. One AD describes DMB as Cellular phone and the other Ad describes DMB as personal TV. When two ADs are exposed to subjects, consumers don't know their prior perception of DMB, in other words, which subject belongs 'similar-to-Cellular phone' segment or 'similar-to-TV' segment? However, we analyze the AD's effect differently for each segment. In research design, final observation is for investigating AD effect. Perception before AD is compared with perception after AD. Comparisons are made for each segment and for each AD. For the segment who perceives DMB similar to TV, AD that describes DMB as cellular phone could change the prior perception. And AD that describes DMB as personal TV, could enforce the prior perception. For data collection, subjects are selected from undergraduate students because they have basic knowledge about most digital equipments and have open attitude about a new product and media. Total number of subjects is 240. In order to measure perception about DMB, we use indirect measurement, comparison with other similar digital products. To select similar digital products, we pre-survey students and then finally select PDA, Car-TV, Cellular Phone, MP3 player, TV, and PSP. Quasi experiment is done at several classes under instructor's allowance. After brief introduction, prior knowledge, awareness, and usage about DMB as well as other digital instruments is asked and their similarities and perceived characteristics are measured. And then, two kinds of manipulated color-printed AD are distributed and similarities and perceived characteristics for DMB are re-measured. Finally purchase intension, AD attitude, manipulation check, and demographic variables are asked. Subjects are given small gift for participation. Stimuli are color-printed advertising. Their actual size is A4 and made after several pre-test from AD professionals and students. As results, consumers are segmented into two subgroups based on their perceptions of DMB. Similarity measure between DMB and cellular phone and similarity measure between DMB and TV are used to classify consumers. If subject whose first measure is less than the second measure, she is classified into segment A and segment A is characterized as they perceive DMB like TV. Otherwise, they are classified as segment B, who perceives DMB like cellular phone. Discriminant analysis on these groups with their characteristics of usage and attitude shows that Segment A knows much about DMB and uses a lot of digital instrument. Segment B, who thinks DMB as cellular phone doesn't know well about DMB and not familiar with other digital instruments. So, consumers with higher knowledge perceive DMB similar to TV because launching DMB advertising lead consumer think DMB as TV. Consumers with less interest on digital products don't know well about DMB AD and then think DMB as cellular phone. In order to investigate perceptions of DMB as well as other digital instruments, we apply Proxscal analysis, Multidimensional Scaling technique at SPSS statistical package. At first step, subjects are presented 21 pairs of 7 digital instruments and evaluate similarity judgments on 7 point scale. And for each segment, their similarity judgments are averaged and similarity matrix is made. Secondly, Proxscal analysis of segment A and B are done. At third stage, get similarity judgment between DMB and other digital instruments after AD exposure. Lastly, similarity judgments of group A-1, A-2, B-1, and B-2 are named as 'after DMB' and put them into matrix made at the first stage. Then apply Proxscal analysis on these matrixes and check the positional difference of DMB and after DMB. The results show that map of segment A, who perceives DMB similar as TV, shows that DMB position closer to TV than to Cellular phone as expected. Map of segment B, who perceive DMB similar as cellular phone shows that DMB position closer to Cellular phone than to TV as expected. Stress value and R-square is acceptable. And, change results after stimuli, manipulated Advertising show that AD makes DMB perception bent toward Cellular phone when Cellular phone-like AD is exposed, and that DMB positioning move towards Car-TV which is more personalized one when TV-like AD is exposed. It is true for both segment, A and B, consistently. Furthermore, the paper apply correspondence analysis to the same data and find almost the same results. The paper answers two main research questions. The first one is that perception about a new product is made mainly from prior experience. And the second one is that AD is effective in changing and enforcing perception. In addition to above, we extend perception change to purchase intention. Purchase intention is high when AD enforces original perception. AD that shows DMB like TV makes worst intention. This paper has limitations and issues to be pursed in near future. Methodologically, current methodology can't provide statistical test on the perceptual change, since classical MDS models, like Proxscal and correspondence analysis are not probability models. So, a new probability MDS model for testing hypothesis about configuration needs to be developed. Next, advertising message needs to be developed more rigorously from theoretical and managerial perspective. Also experimental procedure could be improved for more realistic data collection. For example, web-based experiment and real product stimuli and multimedia presentation could be employed. Or, one can display products together in simulated shop. In addition, demand and social desirability threats of internal validity could influence on the results. In order to handle the threats, results of the model-intended advertising and other "pseudo" advertising could be compared. Furthermore, one can try various level of innovativeness in order to check whether it make any different results (cf. Moon 2006). In addition, if one can create hypothetical product that is really innovative and new for research, it helps to make a vacant impression status and then to study how to form impression in more rigorous way.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2004년도 추계학술대회
• /
• pp.355-380
• /
• 2004

이 논문은 과거의 산업 포트폴리오 수익률이 어떻게 확률추세(stochastic trend)로부터 전체 주식시장과 두 가지 거시경제 변수(경기동행지수와 산업생산)들을 예측할 수 있는 지를 알아보는 데에 초점을 두고 있다. 먼저, 산업들의 포트폴리오 수익률과 전체 주식시장 수익률이 VAR모형을 토대로 볼 경우 Granger 인과관계를 갖고 있는지를 살펴보았다. 이 분석의 결과에서 건설, 금속, 무역, 반도체, 보험, 비금속광물, 서비스, 섬유, 식료, 운수/창고, 유통, 의류, 자동차부풀, 전기전자, 정유, 조선, 종이/목재, 증권, 컴퓨터, 통신, 화학 등 21개 업종은 각 산업별 포트폴리오 수익률이 전체 주식시장 수익률을 $5\%$ 수준에서 통계적으로 유의한 영향을 주고 있음을 알 수 있었다. 이들 21개의 산업별 포트폴리오 수익률은 경제적으로도 중요한 의미를 지니고 있다. 즉, 당월(t)의 비금속광물과 정유, 금속 포트폴리오 수익률 등은 다음 월(t+1)의 전체 주식시장 수익률과 음(-)의 상관관계를 갖고 있는 것을 알 수 있었다. 이는 역사적인 데이터를 살펴볼 때, 이들 산업 제품의 가격의 상승은 향후 경제에 악영향을 주기 때문인 것이다. 반면에, 의류 및 무역 등의 경우에는 반대로 이들 산업들의 포트폴리오 수익률이 전체 주식시장 수익률과 양의 상관관계를 나타내 이들 산업들에 있어서 높은 수익률은 향후 경제가 상승국면이 예상됨을 나타내어 주고 있다. 이와 같은 산업별 포트폴리오 수익률과 거시경제변수 간의 높은 상관관계를 토대로 하여 전체 주식시장 수익률 예측을 가능하게 하는 업종 정보(sector information)의 점진적 확산(slow diffusion) 현상이 발생하게 되는 것이다.수 있었다.의 20세 이하 골절 및 탈구가$30.3\%까지 감소하게되어 년도가 증가함에 따라 청장년 층에 비하여 소아골절 및 탈구가 전체적으로 감소하는 경향을 보였다. 스키골절의 부위별 발생빈도는 1990년 이전까지 하지골절 및 탈구가 많았으나 이후 점차 상지의 골절 탈구가 증가하였다 하지에서 가장 많은 골절은 경골 골절이었으며, 경골골절은 회전력에 의한 나선형골절이 $76.5\%로 가장 많았고 년도에 따른 변화는 보이지 않았다. 스키손상의 발생빈도는 초기에 비하여 점차 감소하는 경향을 보였으며, 손상의 특성도 부위별, 연령별로 다양한 변화를 나타내었다.해가능성을 가진 균이 상당수 검출되므로 원료의 수송, 김치의 제조 및 유통과정에서 병원균에 대한 오염방지에 유의하여야 할 것이다. 확인할 수 있었다. 이상의 결과에 의하면 고농도의 유기물이 함유된 음식물쓰레기는 Hybrid Anaerobic Reactor (HAR)를 이용하여 HRT 30일 정도에서 충분히 직접 혐기성처리가 가능하며, 이때 발생된 $CH_{4}$를 회수하여 이용하면 대체에너지원으로 활용 가치가 높은 것으로 판단된다./207), $99.2\%$(238/240), $98.5\%$(133/135) 및 $100\%$ (313)였다. 각각 두 개의 요골동맥과 우내흉동맥에서 부분협착이나 경쟁혈류가 관찰되었다. 결론: 동맥 도관만을 이용한 Off pump CABG를 시행하여 감염의 위험성을 증가시키지 않으면서 영구적인 신경학적 합병증을 일으키지 않았고 좋은 혈관 개존율을 보여주었다. 따라서 동맥 도관을 이용한 Off pump CABG는 관상동맥의 협착의 정도에

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.