• 한국터널지하공간학회 논문집
• /
• 제23권2호
• /
• pp.93-106
• /
• 2021

일반적으로 세그먼트 라이닝 터널은 프리캐스트 콘크리트 세그먼트를 연결하여 하나의 링을 구성하고 터널의 진행방향으로 링을 서로 결합하여 형성한 터널을 말한다. 세그먼트 라이닝의 구조적 특성은 세그먼트 이음부의 거동에 따라 크게 달라지므로 이음부를 적절하게 모델링해야 한다. 지반 하중을 받을 때 세그먼트 이음부는 회전에 저항하는 힌지로 작동하며, 모멘트-회전 관계는 비선형 거동을 보인다. 세그먼트 이음부가 라이닝 거동에 미치는 영향을 파악하기 위해 실제 설계에 통용되는 일본 기준 및 Janssen 모델을 적용하여 세그먼트 이음부의 모멘트-회전 관계를 설정하였다. 또한 이 논문은 지압강도를 기초로 세그먼트 이음부의 회전강성을 결정하는 방법을 제시하였다. 가상의 설계조건에서 기존 모델 및 제시된 방법을 적용해 세그먼트 이음부의 회전을 추정하고 세그먼트 라이닝과 이음부에서 발생하는 단면력을 계산하였다. 세그먼트 이음부의 회전이 증가할수록 이음부의 접촉 면적이 감소하므로 세그먼트 이음부의 지압강도를 확인해야 한다. 이 논문은 세그먼트 이음부의 지압강도를 검토하기 위해 세그먼트 이음부의 회전강성을 결정하고 지압강도를 계산하는 일관된 방법을 제시하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.129-131
• /
• 2004

Elliptic Curve Cryptography (ECC) coprocessors support massive scalar multiplications of a point. We research the design for multi-segment multipliers in fixed-size ECC coprocessors using the multi-segment Karatsuba algorithm on GF($2^m$). ECC coprocessors of the proposed multiplier is verified on the SoC-design verification kit which embeds ALTERA EXCALIBUR FPGAs. As a result of our experiment, the multi-segment Karatsuba multiplier, which has more efficient performance about twice times than the traditional multi-segment multiplier, can be implemented as adding few H/W resources. Therefore the multi-segment Karatsuba multiplier which satisfies performance for the cryptographic algorithm, is adequate for a low cost embedded system, and is implemented in the minimum area.

• 전기학회논문지
• /
• 제59권6호
• /
• pp.1143-1149
• /
• 2010

In this study, we propose a novel method to detect and enhance the feature of ST-segment which offers the crucial information for the diagnosis of myocardial infarction and ischemia. With this aim, PQRST features of Electrocardiogram initially are detected and subsequently ST-segment are estimated. And Dynamic Time Warping(DTW) transformation is applied recursively to minimize the difference in time between ST-segments and calculate the minimum cumulative distance that decides the degree of similarity among ST-segments. As of the results, the inherent characteristic of ST-segment can be emphasized in terms of time parameter and thus the diagnostic features of a ST-segment can be revealed further.

• 한국항공운항학회지
• /
• 제22권2호
• /
• pp.9-15
• /
• 2014

'Visual segment surface' means a surface that extends from the missed approach point of non precision approaches (or the decision altitude location for approaches with vertical guidance and precision approaches) to the threshold to facilitate the identification of and protection from obstacles in this visual segment of the approach. Validation is the necessary final quality assurance step in the procedure design process, prior to publication. The purpose of validation is the verification of all obstacle and navigation data, and assessment of flyability of the procedure. This paper shows how to apply the protection for the visual segment of the approach procedure, and the results of the validation for visual segment surface conducted at an airport.

• 음성과학
• /
• 제11권4호
• /
• pp.207-221
• /
• 2004

There are two different approaches in studying mapping between syntactic structure and prosody, the 'phonetic approach' and the 'phonological approach'. An experiment to examine which approach is more valid was conducted. In the experiment, syntactically ambiguous Seoul Korean sentences in each of which a noun immediately after an adjective starts with either an H-segment (a segment which triggers the AP-initial H tone) or an L-segment (a segment other than H-segments) were recorded. by 3 Seoul Korean speakers. The F0 values in the syllables containing the consonants in question were then measured. The results show that interaction between the segment type and the branching structure is statistically significant. which suggests that it is difficult to use the phonetic .approach to generalize the relationship between syntax and prosody. Thus, it is concluded that the phonological approach is more valid.

• 말소리와 음성과학
• /
• 제2권4호
• /
• pp.59-65
• /
• 2010

In this paper, we investigate acoustic characteristics of Korean /s/ when it is followed by both a high front and a round segment regardless of their order to one another. We show that Korean /s/ in this environment has characteristics of a labio-palatalized segment, being affected by both a high front and a round segment if they occur within the domain of a syllable. In the experiment, we show that Korean /s/ before a high front and a round segment shows a spectral shape different from that in other environments. Specifically, it is different from /s/ before a high front segment only, showing peaks around 2.5 kHz. Furthermore, it shows a rapid decrease of amplitude in 4-5 kHz, and sometimes another plateau of high peaks in 5-6 kHz. We also examined center of gravity frequency and band energy difference. Based on the results of this experiment, we argue that Korean /s/ is affected by the following segments within the domain of coarticulation, a syllable and that the degree of coarticulation is different from language to language.

• Macromolecular Research
• /
• 제10권6호
• /
• pp.365-368
• /
• 2002

Thermoplastic polyurethanes (TPUs) with different hard segment length has been prepared from a fixed molar ratio of poly(tetramethylene ether glycol), 4,4'-diphenylmethane diisocyanate, and 1,4-butanediol by different polymerization procedures. Results reveal that the on-set temperature of endotherms ( $T_{cc}$ ) due to the crystallization of hard segments by cooling the TPUs from melt and the peak temperature of endotherms due to the melting of hard segments ( $T_{mh}$ ) by heating the TPUs increased and levelled off with increasing the hard segment length of TPUs. It has also been observed that soft segment glass transition temperature ( $T_{gs}$ ) of TPU decreased slightly with increasing the hard segment length, which explains less mixing of soft segments and hard segments. In tensile measurement of TPUs, strain hardening is observed with increasing the hard segment length, which is attributed to the strain induced crystallization of soft segments.

• 반도체디스플레이기술학회지
• /
• 제19권4호
• /
• pp.130-134
• /
• 2020

This paper proposes a new method for the digit recognition on a 7-segment display. The proposed method uses morphological processing that dilates segments of digits and connects them into strokes. The digits are extracted by connected component analysis and finally, template matching method recognizes the extracted digits. The proposed method is implemented using C language in Raspberry Pi 4 system with a camera module for a real-time image processing. Experiments were conducted by using various 7-segment LED displays and 7-segment mono LCD displays. The results show that the proposed method is successful for the digit recognition on the 7-segment displays.

• Animal Systematics, Evolution and Diversity
• /
• 제22권1호
• /
• pp.1-11
• /
• 2006

Three new species of Kelleria are described based on the females from the invertebrate burrows in the Port Seogwipo, Jeju Island, Korea. These species possess in common no process on the inner margin of the free segment of leg 5. Kelleria grandisetiger n. sp. possesses a large seta on lateral sides of the genital double-somite and a small thumb-like process near base of the free segment of leg 5. Kelleria undecidentata n. sp. possesses the elongated free segment of leg 5 which is more than four times as long as wide and 11 teeth on the distal margin of the second maxillary segment. Kelleria portiviva n. sp. possesses one seta and one distinct spine on the distal margin of the free segment of leg 5, ten or 11 teeth on the distal margin of the second maxillary segment, and a tuft of spinules on the convex outer comer of mandible.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제16권1호
• /
• pp.51-62
• /
• 1994

The sagittal split osteotomy of the mandibular ramus is a common procedure which has been used in the correction of mandibular deformities for a few decades. Although the technical improvements have increased the reliability and stability of SSRO procedure, the postoperative relapse is imperative and clinically more significant than any other complication. One of the major causes of the relapse is due to the displacement of the proximal segment during SSRO procedure, which is well documented in the literature. Therefore it is important to preserve the original position of the proximal segment during SSRO proced and maxillofacial fixation period. In the case of mandibular asymmetry, if one side of mandible is advanced and the other side of mandible is setback during SSRO procedure, the proximal segment in the advancement site will rotate laterally and the proximal segment in the setback site will rotate medially. For the prevention of the lateral rotation or flaring of the proximal segment in the advancment site. we deliberately fracture the posterior protion of the distal segment in green-stick fashion during SSRO procedure, and there is no need to fix the fractured lingual segment. We fix the two osteotomized bony segments in the buccal cortex area rigidly with adjustable monocortical plates and screws. During SSRO procedure the lingual fracture technique was applied to nine patients with severe mandibular asymmetry who underwent orthognathic surgery in our hospital since march, 1992. These clinical experiencies enable us to find the lingual fracture technique has the following advantages. 1. The proximal segment is displaced minimally. 2. The osteotomized bony segments are contacted intimately. 3. The postoperative relapse and the healing period are decreased.