• Journal of Surface Science and Engineering
• /
• v.53 no.5
• /
• pp.241-248
• /
• 2020

The change of the deposition behavior of diamond through a pretreatment process of the base metal prior to diamond deposition using HFCVD was investigated. To improve the specific surface area of the base material, sanding was performed using sandblasting first, and chemical etching treatment was performed to further improve the uniform specific surface area. Chemical etching was performed by immersing the base material in HCl solutions with various etching time. Thereafter, seeding was performed by immersing the sanded and etched base material in a diamond seeding solution. Diamond deposition according to all pretreatment conditions was performed under the same conditions. Methane was used as the carbon source and hydrogen was used as the reaction gas. The most optimal conditions were found by analyzing the improvement of the specific surface area and uniformity, and the optimal diamond seeding solution concentration and immersion time were also obtained for the diamond particle seeding method. As a result, the sandblasted base material was immersed in 20% HCl for 60 minutes at 100 ℃ and chemically etched, and then immersed in a diamond seeding solution of 5 g/L and seeded using ultrasonic waves for 30 minutes. It was possible to obtain optimized economical diamond film growth rates.

• Journal of Environmental Science International
• /
• v.32 no.12
• /
• pp.899-914
• /
• 2023

Various seeding materials for cloud seeding are being used, and sodium chloride powder is one of them, which is commonly used. This study analyzed the experimental results of multi-aircraft cloud seeding in connection with Republic of Korea Air Force (CN235) and KMA/NIMS(Korea Meteorological Administration/National Institute of Meteorological Sciences) Atmospheric Research Aircraft. Powdered sodium chloride was used in CN235 for the first time in South Korea. The analysis of the cloud particle size distributions and radar reflectivity before and after cloud seeding showed that the growth efficiency of powdery seeding material in the cloud is slightly higher than that of hygroscopic flare composition in the distribution of number concentrations by cloud aerosol particle diameter (10 ~ 1000 ㎛). Considering the radar reflectivity, precipitation, and numerical model simulation, the enhanced precipitation due to cloud seeding was calculated to be a maximum of 3.7 mm for 6 hours. The simulated seeding effect area was about 3,695 km², which corresponds to 13,634,550 tons of water. In the precipitation component analysis, as a direct verification method, the ion equivalent concentrations (Na⁺, Cl^-, Ca²⁺) of the seeding material at the Bukgangneung site were found to be about 1000 times higher than those of other non-affected areas between about 1 and 2 hours after seeding. This study suggests the possibility of continuous multi-aircraft cloud seeding experiments to accumulate and increase the amount of precipitation enhancement.

• Journal of Korean Society of Forest Science
• /
• v.31 no.1
• /
• pp.37-42
• /
• 1976

In this study, an effort was made to find out more effective methods for vegetation establishment on denuded forest land along Cheon Bo Mountains, This area has serious sheet erosion as a major erosion process and parent material is granite gneiss which is known as one of the most erosive materials. Lespedeza bicolor, Arundinella hirta and Robinia pseudoacacia were used as ground cover species. Seeding methods were open broadcast seeding and broadcast seeding with straw mulch, dill seeding with 10cm and 20cm width, and spot seeding with 20cm and 30cm diameter. 1. On slopes less than 30 degrees, broadcast seeding method with straw mulch was the most effective way to establish vegetation cover. 2. On steep slopes more than 30 degrees, 10cm drill seeding method was more effective than the other methods. 3. Soil Texture has an influence on vegetation establishment governing soil moisture condition. Coverage and fresh weight were increased with the fine material qantity in soil. 4. In process of year, coverage was increased with fresh weight. On the other hand, survival decreased.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.5 no.2 s.17
• /
• pp.45-56
• /
• 2005

Cloud meteorological properties over Daegwallyeong mountain area were analyzed for experimental cloud seeding which related to a feasibility study of fog modification. The cloud seeding for fog modification has been refocused to using hygroscopic chemical to dissipate warm fog. In this study, the statistics of fog observations were analyzed and discussed. Fog properties mostly showed the Summer warm fog, the early morning occurrences before to 6 o'clock AM, and 7 to 9 o'clock dissipation in the statistics. In the Spring and Winter season an easterly wind produced cold fog which is good applied with AgI seeding agents. Extrapolation of these results suggests that the suitable seeding method and material for fog modification will be introduced from the actual seeding experiments in the cold and warm fog.

• Journal of Korea Foundry Society
• /
• v.26 no.4
• /
• pp.184-190
• /
• 2006

Presence of inclusions in Ti castings imparts detrimental effects on the mechanical performance of castings. However, actual inclusions do not occur very frequently and they are difficult to locate. As a result, acquirement of specimens for mechanical tests and thus in-depth research of the adverse influence of inclusions are challenging. To address this problem, artificial inclusion seeding methodology is developed to emulate actual inclusions in Ti investment castings. Firstly, to validate that this new methodology does not result in inherent mechanical property degradation, Ti specimens with machined, backfilled and HIPed holes are produced and compared to control (unaltered), cast Ti material. Fatigue test results indicate that this 'machine-and-HIP methodology without seeding' does not result in any fundamental mechanical property alteration, which would bias ensuing comparative results. Secondly, based on this result, validation of the artificially seeded inclusions being equivalent to 'as cast' inclusions is performed by comparing their fatigue behaviors. Test specimens created by the novel artificial inclusion seeding methodology are equivalent to Ti casting specimens containing actual cast-in inclusions, and an adverse effect of inclusions in investment castings is confirmed.

• Journal of Korea Water Resources Association
• /
• v.53 no.11
• /
• pp.999-1013
• /
• 2020

Weather modification research has been actively performed worldwide, but a technology that can more quantitatively prove the research effects are needed. In this study, the seeding effect, the efficiency of precipitation enhancement in weather modification experiment, was verified using the radar data. Also, the effects of seeding material on hydrometeor change was analyzed. For this, radar data, weather conditions, and numerical simulation data for diffusion were applied. First, a method to analyze the seeding effect in three steps was proposed: before seeding, during seeding, and after seeding. The proposed method was applied to three cases of weather modification experiments conducted in Gangwon-do and the West Sea regions. As a result, when there is no natural precipitation, the radar reflectivity detected in the area where precipitation change is expected was determined as the seeding effect. When natural precipitation occurs, the seeding effect was determined by excluding the effect of natural precipitation from the maximum reflectivity detected. For the application results, it was found that the precipitation intensity increased by 0.1 mm/h through the seeding effect. In addition, it was confirmed that ice crystals, supercooled water droplets, and mixed-phase precipitation were distributed in the seeding cloud. The results of these weather modification research can be used to secure water resources as well as for future study of cloud physics.

• Journal of Biosystems Engineering
• /
• v.22 no.2
• /
• pp.163-176
• /
• 1997

Sesame was one of the economical crops in Korea. However, cultivation area of sesame has been decreasing rapidly due to the lack of mechanization for this crop and the opening of agricultural product market. Sesame seed is so small that ordinary seeder can not seed properly. In rural practice, farmers seed sesame with hand and do thinning after shoot emerges. Seeding and thinning in sesame cultivation take more than 40% of total labor To reduce labor in seeding and thinning, a pellet seed machine for sesame has been developed. The pellet seed machine is very simple in structure. It utilizes the chemical reaction between alginate solution and $CaCl_2$. Two material forms a membrane when they meet The uniqueness of the pellet seed machine for sesame were 1) a counter rotating roller for metering the mixture of activated carbon and alginate and 2) swinging plate for submerging seed into the mixture. The prototype machine can produce 30, 000 pellets per hour and costs ￦6, 891 per 1 km sesame.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.251-254
• /
• 1999

A new multi-seeding process for the growth of YBa$_2$Cu$_3$Oxx single crystals was developed. This process introduces an additional heating step to peritectic temperature and a subsequent slow cooling step to the growth temperature following the point when the crystals contacted. The crystal growth was resumed thereafter. The results obtained with this new process were compared with those of the conventional growth process, in which materials were only kept at the growth temperature. It was observed that the liquid phase between crystals were almost completely eliminated, but that Y2ll grains were grown during this new process. There was no significant improvement in trapped magnetic field over the conventional process, which is believed to be due to the cracks generated during the oxygen heat treatment or to the growth of YBa$_2$Cu$_3$Ox grains.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.9 no.1
• /
• pp.41-54
• /
• 2006

In case of leaving artificial slopes resulting from large-scale constructions, there may be secondary damage caused by soil loss due to erosion and collapse. Furthermore, slope-restoring constructions have a few problems such as monotonous landscape and difficult succession of secondary vegetation due to reckless use of exotic grass, despite attaining the initial purpose of revegetation. To settle this problem, selected plants deemed to be proper for revegetation were used on one of thin vegetation base methods, CODRA SYSTEM, and made seeding mixture experimental plots considering germination rates differing in each season. Native herbs, native shrubs and exotic herbs contents were increased by 30% and 50% respectively, centered on seeding quantity(30g/$m^2$) used as design standard in the seed spray method, in order to figure out proper quantity for revegetation in each season.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.10 no.5
• /
• pp.67-75
• /
• 2007

The purpose of this study was to pelletize to calendula and salvia seeds with peat moss as basic material for the efficient greening and vegetating of slopes and damaged areas. Also the pelletizing was compressed by spherical types that mixed basic fertilizer of N.;300 mg/l, P.;200 mg/l, K.;400 mg/g and plant growth regulator of A and NAA each 300PPM. Soil and soil surface seeding methods were researched to find the growing state of germination percent, germination date, germination force, length of leaf, number of leaf, width of leaf, length of plant, and etc. Comparing with controlled pelletizing, peat moss and +GA pelletizing treatments resulted in higher from two to three times as following growing states : length of leaves, number of leaves, width of leaves, length of plants, length of roots, fresh weights, and ratio of germination. Especially the two treatments above showed four more times effects than the +NNA treatment. Also their germinating date germinating force were earlier and stronger. The surface seeding method was superior to soil seeding.