• Journal of Biosystems Engineering
• /
• 제25권6호
• /
• pp.463-470
• /
• 2000

For maximum seeding efficiency of a nozzle type seeder, the performance of the nozzle should be considered sufficiently. This study was carried out to investigate the optimum operating conditions of a seeder attached the vacuum nozzle which was modified syringe needle acting on the plug seedling tray and the seed plate. Such operating factors as the hole diameter of the nozzle (d), the distance from the nozzle tip to the bottom plate of seed hopper(D) the absorbing air pressure of the nozzle tip(P) the bounding height of seed from the vibrated bottom plate of seed hopper and the seeding speed were selected based on the weight of a grain of seed(W). The treated materials were pepper seed as the flat type, cucumber seed as the oval type and radish seed as the spherical type. The optimum operating conditions of the experimental seeder were revealed as follows: 1. The height of the seed bounding from the bottom plate of seed hopper and the distance from nozzle tip to bounded seed were 5 mm and 0.5 mm at all seeds. The hole diameter of the nozzle and the absorbing pressure for pepper seed, cucumber seed and radish seed was 0.45 mm, 0.65 mm. 0.65mm and 39.2 kPa, 88.3 kPa, 58.8 kPa, respectively. 2. The absorbing pressure P was represented as P=η.4W/$\pi$d$^2$ where η was 100. The seeding speed using a 128 cell tray was 2.4 cm/s which was same transfer as 2.5 trays per minute. 3. The maximum seeding rate in case of the pepper seed was 97% the cucumber seed was 95% and the radish seed was 100% under the optimum operating conditions of the seeder.

• 한국작물학회지
• /
• 제51권1호
• /
• pp.59-65
• /
• 2006

The impermeable seed coat is valuable trait in soybean because impermeable seed retain viability for longer period than permeable seed under adverse conditions such as delayed harvest or prolonged storage. Soybean seeds of various size showing different seed hardness were examined for their water absorption and seed viability under adverse storage conditions. Of one hundred thirty nine genotypes, eight types of seeds having different seed hardness and seed size were used as material. Soybean genotypes showing high hard seed rate, GSI13125 (89%), GSI10715 (54%), and GSI10284 (42%), were slow in water absorption and low in the electroconductivity of seed leachate in distilled water. Germination of GSI10284 and GSI13125 that have higher hard seed rate was less affected by CSVT and artificial aging treatment indicating higher seed storability. The higher storing ability of both collections was confirmed by electroconductivity test for leachate. GSI10122 showed low seedling emergence when the seeds were artificially aged. This genotype was considered as to having a poor storing ability based on difference of electroconductivity before and after artificial aging. Among tests conducted in the experiment, CSVT could be used for determining storage life in legumes. In conclusion, water absorption property of seed was strongly related to the hardness that is directly related to the seed viability and storing ability in soybean seed.

• 한국환경생태학회지
• /
• 제9권1호
• /
• pp.56-61
• /
• 1995

강원지방에 자생하는 야생의 초본식물 6종에 대한 실생번식법을 밝히고자, 1954년 봄과 가을에 종자를 채취하여 Gibberelin(GA$_3$) 25 및 50ppm 수용액에 24시간 침지하였으며, 대조구로는 지하수에 24시간 침지시켰다. 처리된 종자를 1995년 4월 23일에 혼합토양(모래：peat moss： perlite： vermiculite, 1：1：1：1, v/v)을 채운 플라스틱 화분(직경 12,높이 11cm)에 40립씩 3반복으로 파종하여 2일에 1회씩 관수하면서 발아된 개체수를 조사하였다. 1995년 5월 13일에 채취된 할미꽃 종자는 1995년 5월 31일에 처리하고 6월 1일에 묘포에 파종하였다. 향유, 금낭화 및 배초향의 종자발아는 처리간 고도의 통계적 유의차가 인정되었으나 가는 쑥부쟁이, 거북꼬리 할미꽃 등의 종들에서는 처리간 유의차가 인정되지 않았다. 금낭화와 배초향에서는 25ppm, 향유에서는 50ppm 처리구에서 발아촉진 효과가 높은 것으로 나타났다. 각 야생초류의 자원화 가능성을 검토하였다.

• 한국토양비료학회지
• /
• 제46권1호
• /
• pp.49-52
• /
• 2013

헤어리베치와 같은 두과 녹비작물은 종피가 딱딱하여 발아율 감소의 원인이 되는 경실률이 환경 및 저장조건에 따라 10~40%나 된다. 따라서 헤어리베치의 종자 발아율을 증진하기 위하여 침수처리, 종피파상 및 황산처리가 발아에 미치는 영향 조사한 결과 다음과 같다. 헤어리베치 종자를 증류수에 1~9시간까지 침지 시킨 후 발아율을 조사한 결과 5시간 침지조건에서 초기발아가 가장 좋았으며 발아율에는 큰 차이는 보이지 않았지만 무침지에 비하여 9% 높은 것으로 나타났다. 온도 조건에 따른 발아율의 차이는 83.0~85.7%로 큰 차이는 없었지만 초기 발아 속도는 $10^{\circ}C$의 5%에 비하여 $20^{\circ}C$ 31.7%, $30^{\circ}C$ 48.3%로 발아율의 증가를 보였다. 종피파상 (칼집처리) 시험 시 무처리 헤어리베치 종자의 발아율은 65%였고 파상처리 종자의 발아율은 97%로 헤어리베치 종피의 파상처리는 종자의 발아율을 상승시키는데 효과가 큰 것으로 나타났다. 헤어리베치 종자를 10분, 20분 동안 황산처리된 종자의 발아율은 각각 76.7%, 74.7%를 보였으며 30분 동안 처리된 종자는 96.0%의 발아율로 가장 높았다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -1
• /
• pp.339-342
• /
• 2000

This paper presented a FPGA design of SEED, which is the Korea standard 128-bit block cipher. In this work, SEED was designed technology- independently for other applications such as ASIC or core-based designs. Hence in case of changing the target of design, it is not necessary to modify design or need only minor modification to reuse the design. Since SEED algorithm requires a lot of hardware resources, each unit was designed only once and used sequentially. So, the number of gates was minimized and SEED algorithm was fitted in FPGA without additional components. It was confirmed that the rate of resource usage is about 80% in ALTERA 10KE and the SEED design operates in a clock frequency of 131.57 MHz and an encryption rate of 29 Mbps.

• 한국세라믹학회지
• /
• 제32권5호
• /
• pp.587-593
• /
• 1995

Abnomal grain growth behavior of BaTiO3 ceramics was investigated with addition of seed grains. It was foudn that the nucleation rate of abnormal grain was constant and growth of abnormal grain was linearly increased with sitnering time, regardless of amount of seed grains. These facts were also confirmed by fitting of the volume fraction of abnormal grain vs. sintering time using Avrami type equation (n=4). It was suggested that seed grains did not change the nucleation rate or growth mechanism of abnormal grain but increase the number of abnormal grains at initial stage of sintering and then it led to fine microstructure of BaTiO3 ceramics.

• 한국작물학회지
• /
• 제59권4호
• /
• pp.427-434
• /
• 2014

1. 생산지에 따라 벼 종자의 수발아립률 차이가 컸던 호품벼의 출아율과 발아율을 조사한 결과, 수발아율 8%인 시료는 수발아율이 1%인 시료에 비해 발아율과 출아율, 종자활력이 30% 낮았다. 2. 수발아율이 높은 시료는 수발아립의 변색 정도가 심하고 미발아율과 부패율이 높았다. 수발아립은 배가 돌출하고, 변색된 배유와 곰팡이 감염이 관찰되었으며 배유의 1/2이상이 변색된 종자는 발아율이 매우 낮았다. 3. 종자의 발아 진행정도에 따라 현미의 변색이 심해졌는데, 싹이 3 mm이상일 경우 배유의 1/2정도가 변색되었다. 4. 발아 종자는 싹이 3 mm이상일 때부터 재발아율이 크게 떨어졌으며 퇴화촉진처리 후 발아율의 감소가 더 컸다. 특히 퇴화촉진처리한 발아 종자는 싹이 2 mm부터 종자활력이 크게 감소하였다. 결론적으로 수발아 발생이 심할수록 파종기 발아율과 출아율의 감소가 크고, 수발아가 3 mm이상 발생하면 발아율이 크게 저하될 것으로 생각된다. 또한 수발아는 동일 품종과 동일 지역에서도 포장 간 차이가 크게 발생할 수 있으므로 재배관리에 주의해야 한다.

• 한국환경농학회지
• /
• 제28권4호
• /
• pp.403-408
• /
• 2009

Dandelion (Taraxacum platycarpum) has been widely utilized for medicinal purposes. However, the dandelion seeds are relatively difficult to germinate under cultivation conditions, which hampers seedling propagation of dandelion plants and reduces the opportunity of usage of such a useful medicinal plant. Thus, in this study, in vitro conditions for the dandelion seed germination were optimized to enhance the germination rate. In seed washing steps, the sequential treatments with 20% of ethanol, 20% of NaOCl, and distilled water avoided microbial contamination with the highest in vitro germination rate (67.5%) from seeds sown in germination media. The media supplemented with 1.4 g/L of MS salts and 1% of sucrose significantly enhanced the germination rate compared to the media with 4.4 g/L of MS and 3% of sucrose. Sowing the seeds vertically in the optimized media supplement conditions, 1.4 g/L of MS salts and 1% of sucrose, gave the maximum in vitro germination rate (61%), which was almost three times higher than sowing seeds on a soil pot (23%). Our results indicate that the seed washing and sowing methods including germination medium supplements can be optimized to enhance in vitro seed germination of dandelion.

• 한국작물학회지
• /
• 제49권5호
• /
• pp.381-388
• /
• 2004

In Korea, production of super sweet corn has been economically feasible and is substituting for traditional sweet corn due to better flavor in recent years. Major limiting factors for super sweet corn production are low field emergence and low seedling vigor. The optimum water potential (WP) for the priming of normal and aged seeds of dent, sweet (su) and super sweet (sh2) corns was studied to improve low seed quality. Seeds were primed at 0, -0.3, -0.6, -0.9, and -1.2 MPa of polyethylene glycol (PEG) 8000 solution at $15^{\circ}C$ for 2 days. Priming effects differed depending on the type of corn, seed quality, and WP of PEG solution. Although WP of priming solution did not influence the emergence rate of extremely high quality normal dent corn seeds, it reduced time to $50\%$ emergence (T50) and increased plumule weight. In contrast, the emergence rate of aged field corn was improved by seed priming at 0 MPa and plumule weight and $\alpha-amylase$ activity was enhanced. The optimum WP for both normal and aged sweet and super sweet corn seeds was between -0.3 and -0.6 Mpa. At the optimum WP emergence rate, $\alpha-amylase$ activity, and content of DNA and soluble protein increased, while T50 and leakage of total sugars and electrolytes reduced.

• Journal of Biosystems Engineering
• /
• 제27권5호
• /
• pp.381-390
• /
• 2002

Direct seeding of rice-seed pellets is expected to be an alternative for solving problems in current direct seeding cultivation of rice. but mass production of rice-seed pellets is prerequisite for practical application. Design. construction and performance evaluation of an experimental rice seed pelleting machine were carried out for mass production of rice-seed pellets. The pelleting machine intended to make a ball type rice-seed pellet, which have 3∼5 rice seeds and diameter of which is 12 mm. Pellet materials ; rice seeds, soil, and binder were mixed and kneaded by the mixer. The designed rice seed pelleting machine fed pellet materials by screw conveyor to forming rolls and made rice-seed pellets. Capacity, ratio of perfect rice-seed pellets, seed and pellet material loss were investigated as mixing ratio of soil to rice seed and feeding rate of pellet materials. The pelleting machine showed up to 37,000 pellets/h of pelleting rate, 61∼71% of weight ratio of perfect rice-seed pellets to pellet materials supplied, 17∼48% of seed loss ratio. Average weight and average diameter of the pellets were 1.66 g and 12.0 mm. respectively. More than 3 rice seeds were included in most pellets at 6 : 1 of mixing ratio of soil to rice seed. And compression strength of the pellets was in the range of 88-130 N. To improve performance of the pelleting machine, improvements of the forming rolls, feeding mechanism, and discharging mechanism for reducing loss of pellet materials and seeds damage are needed.