한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
/
pp.996-998
/
1996
The drum-type hill-drop unit, an important working device of the plastic -film-covered hill planter, can finish filling and separating seed precisely, perforating film and holing , and its seeding depth and spacing are stability . The unit is applied to hole seed many crops, for example, cotton, corn , soybean, etc. The drum-type hill-drop unit(DHU) , the key work unit to the plastic film-covered planter, mainly consists of distributor box , seeding parts, hole forming unit and drum , It can be operated to accomplish seeds distributing, hole forming , plastic film perforating . Moreover , its inner cavity can be used as seed box.
In order to maintain a constant speed ratio between the tractor and attached seed planter, a feedback control unit to rotate the feed shaft of the planter in proportional to the ground speed of the tractor was designed. The fifth wheel was used as a ground speed sensor for the unit. Using this control unit a feed shaft driving system was developed and tested to estimate its performance both in laboratory and fields. The test results showed that the system rotates the feed shaft proportionally to the ground speed in the range of the normal planting speed of 0.5-0.8m/s with errors less than 5%.
펠렛종자를 점파용 파종기로 이용하여 기계화 정밀파종 함으로써 나종자를 손 작업에 의존하여 파종하는 것보다 파종시간과 솎음시간을 각각 225시간 및 460시간 절감할 수 있었고, 종자량도 72% 절감 할 수 있었다. 인력에 의한 손 파종은 파종과 솎음작업에 1 ha당 720시간이 소요되었으나, 펠렛종자를 이용한 기계화 파종은 35시간에 불과하였다. 따라서 펠렛종자를 기계화 파종함으로써 나종자를 인력에 의존하여 파종하는 관행방법에 비해 파종과 솎음작업의 생력효과를 95% 이상 높일 수 있었다. 펠렛종자의 묘출현율은 무처리 종자보다 출현율이 8% 정도 낮았고 출현속도도 약 1.9일 정도 지연되었으나 35일 경과된 유묘의 초기생육에는 큰 차이가 없었다. 유묘출현 반응은 품종에 따라 약간의 차이는 있으나, 펠렛종자는 나종자나 SMP 처리종자에 비해 출현율이 저하되었고 출현속도도 늦었다. 그러나 SMP 처리하여 종자활력을 증진시킨 후 펠렛하면 출현율도 향상되었고, 묘출현속도도 1일 정도 빨랐다.
한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
/
pp.469-477
/
1996
In order to maintain a constant ratio between the ground wheel and fed shaft of planters, a feedback control unit was designed to drive the feed shaft in proportional to the ground speed. The fifth wheel was used as a ground speed sensor for the control unit. Using this control unit a feed shaft driving system was developed and tested both in the laboratory and field to evaluate it performance . The test results showed that the system drove the feed shaft in proportional to the ground speed in the normal planting speed range of 0.5 -0.8m/s with an error of less than 5%.
Scattering of seeds is one of the problems in the hill- dropping planters with a roller-type metering device. For crops like rice, corns and beans, the hill-dropping is own better for a high yield than the drill planting. The roller type metering device has been used for the drill planters and has many advantages. However, it has a problem of scattering of seeds when they are placed on rows. In this study a method was developed to design the roller type metering device fir the precision hill-droppings. Design parameters were derived to configure completely the geometries of the roller and brush. The method was applied to the design of the metering device of the rice seeding machines. The field test showed that the metering device designed by the method made a better performance of seed placement than that made by the precvious one. The method also can be applied to the design of metering devices for the precise hill-droppings of other crops.
Choi, Il Su;Kang, Na Rae;Kim, Young Keun;Jun, Hyeon Jong;Choi, Yong;Kang, Tae Gyoung;Hyun, Chang Sik;Lee, Sang Hee;Kim, Jin Gu;Yu, Seoung Hwa;Chung, Sun Ok
Journal of Biosystems Engineering
/
제43권4호
/
pp.303-310
/
2018
Purpose: This research was conducted to determine the design factors of a seed-metering device for the development of a seeder. The device allows the seeder to sow precisely one to three seeds of foxtail millet and sorghum. To obtain fundamental information regarding the design of the seed-metering device, examination of the physical properties of foxtail millet and sorghum was conducted. Methods: Based on the results of an adaptability test using an existing seeder with foxtail millet and sorghum, an experimental roller-type seed-metering device was made. The seeding factors considered during the experiment were the width, length, and depth, as well as the shape of the groove in the seed-metering roller. By adapting an analysis of variance, the experimental results of the seeding factors were analyzed. Results: The measured results of the respective lengths and widths of the seeds were 2.11 and 1.64 mm for foxtail millet, and 3.68 and 3.32 mm for sorghum, respectively. The weight of 1,000 seeds was 2.43 g for foxtail millet and 17.5 g for sorghum. The seeds were of an elliptical shape, considering the length and width. A sieve analysis showed that the size distribution of foxtail millet was quite regular whereas that of sorghum was irregular. Conclusions: The seeding results showed that the rates of incorrect planting were low when the groove of the roller-type metering device is an elliptical type. To sow one to three seeds, the groove of roller-type metering devices $2.0mm{\times}4.0mm{\times}1.5mm$ ($width{\times}length{\times}depth$) for foxtail millet, and $4.0mm{\times}8.0mm{\times}3.0mm$ and $4.5mm{\times}8.0mm{\times}3.0mm$ ($width{\times}length{\times}depth$) for Sorghum.
Cho, Yongjin;Choi, Il Soo;Kim, Jae Dong;Oh, Jong-woo;Lee, Dong-Hoon
Journal of Biosystems Engineering
/
제42권3호
/
pp.147-154
/
2017
Purpose: To reduce the costs of potato seeds and labor of workers, a fully automatic in-situ seeding machine for cutting seed potatoes was developed. Methods: An experiment was conducted to evaluate the seeder performance of the prototype of potato planter by cutting seeds in farmlands from March to April 2017. The study tested the seeder performance at working speeds ranging from 0.28 to 0.45 m/s. The seeding rate and seeding distance were also investigated according to the planned distance between planted seeds from 20 to 30 cm, with 5 cm intervals. Results: Tests on the performance of the developed cutting blade on the automatic potato seeder show that whole potatoes should be used instead of half potatoes. The seeding rates were 88.8% and 82.5% for whole and half potatoes, respectively. When the tractor working speed was increased from 0.28 to 0.45 m/s, the successful seeding rate decreased from 98.8% to 96.3%, respectively. However, with planted seed distances of 20, 25, and 30 cm, the successful seeding rates were near 98%. Conclusions: The developed automatic potato seeder can to improve the labor productivity and cultivation environment of potato farms by the mechanization of the seeding process, which is currently associated with high-labor, -costs, and -hours. Therefore, based on this study, the developed automatic potato seeder provides the mechanization necessary for improved potato cultivation conditions in farmlands.
동력경운기용 두류의 무경운 파종기에 부착하여 사용하는 구절기중에서 소요견인력이 작고 구절작업정도가 양호한 구절기의 개발을 위한 기초자료를 얻기 위하여 구동식 토조에 인공강토를 채우고 원판형 및 호우형 구절기의 소요견인력과 이에 영향을 미치는 인자들의 관계를 구명코자 실내모형 확험을 실시하여 다음과 같은 결과를 얻었다. 원판형 구절기에 대하여 직경별로 조립각을 $8^{\circ}$ 와 $16^{\circ}$, 경심을 3 cm 와 6cm로 변화시키면서 2.75cm/sec의 속도로 견인력을 측정한 결과 원판의 직경이 약 28cm인 경우에 견인력이 최소로 나타났고, 직경이 이보다 크거나 작은 때는 견인력이 증가하는 경향을 나타냈으며 비저항도 대체로 비슷한 경향이었으나 원판의 직경이 약 30cm 일 때 최소로 나타났다. 종자파종의 심도조절을 목적으로 작구심(3cm 및 6 cm)과 견인력과의 관계를 조사하였던바, 경심과 견인력과의 관계는 거의 직선적인 변화를 나타냈으며 견인력에 영향을 미치는 인자중에서 경심의 영향이 가장 컸음을 알 수 있었다. 일반적으로 조립각 미 주행속도에 별 영향없이 경심 3cm 및 6 cm 공히 견인력은 직경 약 28 cm에서 , 비저항은 약 30cm에서 최소의 값을 나타내었다. 파종기의 작업성능과 관계가 깊은 주행속도 및 파시의 조절을 목적으로 원판의 조립각과 주행속도가 견인력에 미치는 영향을 조사했던 바, 조립각과 주행속도가 증가함에 따라 모두 견인력이 증가하는 경향을 나타내었으나 견인력에 미치는 영향은 주행속도가 더욱 크게 나타났다. 원판형 구절기와 호우형 구절기를 비교하기 위하여 쐐기각이$16^{\circ}$ 이고 리프트 각이 $20^{\circ}$ 인 호우형 구절기와 조건이 비슷한 조립각$16^{\circ}$ 의 원판형 구절기의 견인특성을 비교한 결과 직경 30cm 인 원판형의 경우는 비저항이 0.35-0.5kg/$cm^2$인데 비해 호우형의 경우는 0.71-1.02kg/$cm^2$로 나타나 호우형의 견인저항력이 평균 2 배정도 크게 나타났고 작구상태고 원판형의 경우보다 불량하였다.
직립식 마늘파종기는 마늘 종구를 한 알씩 집어 올려 중간이송컵으로 이송하는 자세교정컵과 배종부와 자세교정컵에서 낙하된 마늘종구를 땅속으로 파종하는 구조로 설계 제작되었으며,전라북도 익산시에 테스트베드를 구축하여 기계파종을 통한 파종기의 성능개선연구를 수행하였다. 기계파종은 1차년도 기존 파종기의 성능을 개선한 7조식 시제품과, 국내산과 스페인산 마늘을 파종하였으며, 11조용 참여기업의 기존 파종기를 이용하여 테스트베드에서 수행하였다. 비가 온 뒤의 땅에 파종한 라인의 샘플링 자료조사 결과(5m 구간 기준으로 체크) 결주율이 각각 17.81%, 35.6%로 평균적인 결주율이 0.57%인 일반 기상상태와 비교하면 매우 높은 결주율을 보이는 것을 알 수 있다. 마늘 파종법에 대한 결과로, 총 4가지의 파종법을 사용하였으며, 사용한 파종방법에는 2조 병목식 스페인식 파종법, 11조식 트랙터용 파종법, 7조식 트랙터용 파종법, 6조식 이양기용 파종법이다. 이 4가지 파종법 중에서 3가지 파종법에 대한 성장률에 대해서 조사를 해보았다. 11조식의 경우에는 제주도식 파종을 하여 비닐 멀칭이 되어있지 않으며, 7조식의 경우에는 비닐 멀칭이 되어있는 파종방식을 사용하였고, 2조식 병목식 스페인식 파종법의 경우에는 자유낙하 방식으로 비닐 멀칭의 유무에 따라 성장률에 대해서 조사를 하였다. 결주율은 파종된 마늘 중 샘플링한 데이터에 대해서 얼마나 파종이 잘되었는지에 퍼센트로 나타낸 것으로 11조식의 경우 비닐멀칭도 없고 비온 뒤에 파종 되어 파종시기에 문제가 있는 것으로 사료됨. 비가오지 않은 날씨에서 측정한 7조식 1차년도 성능개선 시작품의 결주율은 0.57%로 우수하게 나타났다. 발아율은 파종된 마늘 중 샘플링한 데이터에 대해서 다립파종 되어서 미성장된 것과 결주율을 합하여 퍼센트로 나타낸 것으로 시제품으로 개발한 7조식 파종기는 스페인산과 국내산 마늘의 발아율이 모두 90% 이상으로 나타났으며, 차이점은 파종시기의 차이에 따라 발아율의 차이가 있는 것으로 사료(토양, 재배환경 및 기후에 따른 변동요인이 많음)되며, 이는 파종법의 종류뿐만 아니라 비닐멀칭의 온도유지가 마늘 성장률에 얼마나 영향을 끼치는지에 대한 병행연구도 필요한 것으로 나타났다. 마늘의 성장률에 대해서는 아직 표준화, 정형화 되어있는 측정방법이 없기 때문에 이를 표준화, 정형화를 할 필요가 있다. 향후 이와 같은 결과를 토대로 직립식 마늘파종기의 성능을 더욱 개선시키는 연구를 지속적으로 수행할 계획이다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.