• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.spc1
• /
• pp.239-241
• /
• 2005

Alisma plantago seeds have some difficulties for mechanical sowing because of small, irregular and shrunken shapes. Thus it was intended to make seed pelleting for Alisma piantago seeds to solve these problem. The main object of this study was to find the best materials for Alisma plantago seeds pelleting. The most desirable shapes which provide a spherical and smooth surface of the pelleted seeds that enhance mechanical singling was made from the mixture of SDZ + DE + CA $0.4\%$. The pelleted seeds were easily broken after absorbing water and the germination rate of those was $95.3\%$ in lab.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.10 no.5
• /
• pp.67-75
• /
• 2007

The purpose of this study was to pelletize to calendula and salvia seeds with peat moss as basic material for the efficient greening and vegetating of slopes and damaged areas. Also the pelletizing was compressed by spherical types that mixed basic fertilizer of N.;300 mg/l, P.;200 mg/l, K.;400 mg/g and plant growth regulator of A and NAA each 300PPM. Soil and soil surface seeding methods were researched to find the growing state of germination percent, germination date, germination force, length of leaf, number of leaf, width of leaf, length of plant, and etc. Comparing with controlled pelletizing, peat moss and +GA pelletizing treatments resulted in higher from two to three times as following growing states : length of leaves, number of leaves, width of leaves, length of plants, length of roots, fresh weights, and ratio of germination. Especially the two treatments above showed four more times effects than the +NNA treatment. Also their germinating date germinating force were earlier and stronger. The surface seeding method was superior to soil seeding.

• Journal of Mushroom
• /
• v.12 no.4
• /
• pp.367-370
• /
• 2014

In this study, we attempted to find substitute materials, distillers residue of cassava, alfalfa pellet, and distillers residue of corn, for cotton seed meal in bottle cultivation of Pleurotus ostreatus. In all treatments, the total carbon content was comparable with the exception of T4, and the total nitrogen content of T3 was similar to the control group, and C/N ratio of T4 was higher than other treatments. The diameter of plieus was the largest in T2, and the diameter of stipe was the largest in T2 and T4. And the length of stipe was largest in T1 and T2, and the most number of available stipes was in T1 and T3. The yield and bio-efficiency of fruit-body by residue of corn with soluble treatment(T3), were similar to the control of P. ostreatus. Therefore, it was suggested that residue of corn was substituted for cotton seed meal for cultivation of P. ostreatus.

• Weed & Turfgrass Science
• /
• v.5 no.1
• /
• pp.35-41
• /
• 2016

Earthworm cast is a harmful factor which reduces the uniformity of management of turfgrass and play quality in golf courses and playground. This research was conducted to carry out the efficacy of some pesticide (bifenthrin GR + clothianidin GR, ethoprophos GR, imidacloprid SC, picoxystrobin WG, thiophanate-methyl WP) and tee tree (Camellia oliefera) extracts against reducing earthworm cast in golf courses. All tested materials were acted reducing earthworm cast, thiophanate-methyl among them showed the highest effect reducing earthworm casts in golf courses. Tea tree extracts was occurred similar efficacy among tested chemical pesticides. However, pellet type byproduct of tea seed extract and liquid formulation of tea tree extract were better than granule formulation of them. Byproduct of tea seed and tea tree extract can be used for alternative biological management material for reducing earthworm cast in heavily casting occurrence area.

• Journal of Bio-Environment Control
• /
• v.21 no.3
• /
• pp.199-206
• /
• 2012

This study was conducted in a glasshouse to examine the possibility of producing tomato plug seedlings in a newly-developed inert phenolic foam medium. Plug seedlings of 'Madison' tomato were grown in four pellet type media, Grodan rockwool, UR rockwool, phenolic foam LC, and phenolic foam LC-lite. Seed germination was checked for 7 days. Seedling growth was measured at 19 days after sowing. The greatest germination was obtained in the phenolic foam LC and phenolic foam LC-lite. Plant height, hypocotyl length, leaf area, dry weight, and fresh weight were significantly greater in the rockwool medium than those in the other media. However, the T/R ratio and stem diameter were the greatest in the phenolic foam LC than those in the other media. The total porosity and container capacity of the phenolic foam LC was higher than in the other media. The air space (%) was lowest in the phenolic foam LC. Overall, the phenolic foam LC and phenolic foam LC-lite produced seedlings with similar growth as the rockwool. These results suggested that both phenolic foam LC and phenolic foam LC-lite have potential to be used in production of plug seedlings of 'Madison' tomato.

• The Korean Journal of Mycology
• /
• v.48 no.4
• /
• pp.407-414
• /
• 2020

To replace the sawdust in the growth medium of oyster mushroom to utilize its by-product spent mushroom substrates (SMS) as feed for ruminant, we performed cultivation test using cotton seed hull pellet (CSHP), corn stalk pellet (CSP), corncob (CC), and analyzed the feed chemical properties of those SMS. As a result of cultivation test, CC and CSHP treatment took 27 days for spawn run, 4 days for primordium formation, and 3 days for development fruiting bodies, resulting in a total cultivation period of 34 days. The yield per bottle was 134 g for CC treatment, similar to 130 g for control, while CSHP treatment (112 g) and CSP treatment (68 g) were lower than that of control. The highest biological efficiency (BE) was shown in CC treatment as 80.1%, which was 11.4% higher than 68.7% of control. The SMS of CC treatment had a relatively low content of neutral detergent fiber and acid detergent fiber, and in particular, lignin content was the lowest and crude protein content was the highest among other treatments. Therefore, CC as a substitute material for sawdust was capable of stable mushroom production and excellent nutritional value as a feed for its by-products.

• Journal of Mushroom
• /
• v.9 no.1
• /
• pp.44-47
• /
• 2011

This study was carried out investigate optimal additive content of spent medium from oyster mushroom in Volvariella volvacea cultivation. The formation of spent mushroom medium from oyster mushroom consisted of 50% pine sawdust, 30% beet pulp and 20% cotton seed hull pellet. The higher amount of spent medium from oyster mushroom resulted in higher total nitrogen content and C/N ratio of medium decreased according to increasing mixing ratio of spent medium from oyster mushroom. The fruit body yield and biological efficiency of supplemented with 50% spent medium from oyster mushroom was same level of non additive medium.

• Research in Plant Disease
• /
• v.25 no.1
• /
• pp.29-32
• /
• 2019

Burcucumber (Sicyos angluatus) is a representative ecosystem-disturbing plant in Korea and currently widely spread throughout the country. A sclerotia-forming fungus with moderate host selectivity, Sclerotinia trifoliorum BWC98-105, was tested in the laboratory, green house and natural habitat for its pathogenicity to burcucumber. When mycelial culture fragment was inoculated to burcucumber seedlings under the green house condition, mycelial growth was observed in the following day, and then resulted in the onset of wilting from 5 days after inoculation (DAI). Its characteristic sclerotia as a sign was observed from 7 DAI, and thus plants turned into dark-brown color at the bottom of stem of burcucumber that was eventually blighted at 14 DAI. Similar visible symptoms were observed in natural habitat. Based on the results of showing typical blight symptom to burcucumber and the sign of sclerotia, we report S. trifoliorum BWC98-105 causing stem blight against burcucumber. Its globular pellet was considered of having quite potential as a bioherbicide to control burcucumber in Korea.

• Journal of Life Science
• /
• v.17 no.12
• /
• pp.1701-1708
• /
• 2007

Seed pelleting is generally conducted in order to save the labor for sowing and thinning by enabling the precision mechanical planting. In the present study, the influence of physical and chemical properties of pelleting solid materials was investigated on carrot seed germination. Among the pelleting solid materials evaluated, dialite, kaolin, and talc showed low bulk density and high porosity. Bentonite and dialite carried high water holding capacities of 184% and 173%, respectively, while calcium carbonate, calcium oxide, and fly ash showed relatively low water holding capacity. The pH of kaolin (6.8) and dialite (7.4) were close to neutral, while limestone (12.8), calcium oxide (13.0), and bentonite (10.0) were highly basic. High electro-conductivity was shown in limestone and calcium oxide. EDS analysis revealed that the main elemental compositions of talc were Si (71.0%) and Mg (29.0%), and those of calcium carbonate were Ca (66.6%), Si (22.9%), and Mg (10.5%). High granulation capacity was observed from talc and the mixture of talc and calcium carbonate. Seeds pelleted with bentonite showed the highest hardness. The dissolving type of the pellet layer after imbibition was split type in talc, limestone, zeolite, and fly ash, melt type in calcium carbonate and calcium oxide, and swell type in bentonite and vermiculite. The shortest dissolving time of pellet layer was observed from calcium carbonate and kaolin. The germination speed $(T_{50})$ was delayed as the size of pelleted seeds increased. The optimum size of pelleting was 19 ratio in carrot.

• KSBB Journal
• /
• v.22 no.5
• /
• pp.305-312
• /
• 2007

It is crucial to develop a miniaturized cultivation method for large and rapid screening of high-yielding mutants of monacolin-K, a powerful anti-hypercholesterolemic secondary metabolite biosynthesized by the fungal cells of Monascus ruber. In order to investigate as many strains as possible in a short time, a miniaturized fermentation method especially suitable for the cultivation of the filamentous Monascus mutants was developed using $50m{\ell}$ culture-tube ($7m{\ell}$ of working volume) instead of the traditional $250m{\ell}$ flask ($50m{\ell}$ of working volume). Generally, in filamentous fungal cell fermentations, morphologies in growth and production cultures should be maintained as thick filamentous and compact-pelleted (usually less than 1 mm in diameter) forms, respectively, for enhanced production of secondary metabolites in final production cultures. In this study, we intended to induce the respective optimal morphologies in the miniaturized culture system for the purpose of rapid screening of overproducers. Miniaturized growth culture system was successfully developed due to the mass production of spores in the statistically optimized solid medium. When large amounts of spores were inoculated into the growth cultures, and brown rice flour (20 g/L) was also supplemented to the growth medium, dense filamentous morphologies were successfully induced in the growth cultures performed with the 50 ml culture tubes. It was implied that the amounts of spores inoculated into the growth tube-cultures and the growth medium components should be the key factors for the induction of the filamentous forms in the growth fermentations. Furthermore, in order to statistically optimize production medium, multiple experiments based on Plackett-Burman design and response surface method (RSM) were carried out, resulting in more than 2 fold enhanced production of monacolin-K in the final production cultures with the optimized production medium. Notably, under the production culture conditions with the statistically optimized medium, optimal pellet sizes below 1 mm in diameter were reproducibly induced, in contrast to the thick and viscous filamentous morphologies observed in the previous production cultures.