• 한국환경보건학회지
• /
• 제35권2호
• /
• pp.116-123
• /
• 2009

Laboratory scale experiments were conducted to investigate the removal characteristics of nitrogen and phosphorus by the variation of aeration time in four sequencing batch reactors (SBRs). In R1 which has the shortest aeration time as 1 h, MLVSS concentration in reactor decreased by the wash-out of biomass because of the poor sedimentation. The TOC removal efficiencies were almost similar in 3 reactors except R1. At the low aeration time as 1 h, the nitrification was severely inhibited by the deficiency of oxygen. ${NH_4}^+$-N removal efficiency was decreased by the decrease of aeration time. At the aeration time over 2 h, the phosphorus removal efficiency was not affected by the variation of aeration time. The nitrification was inhibited but the phosphorus release and uptake was not inhibited by the decrease of low aeration time. Therefore, we can see that the phosphorus removal microorganisms are superior to nitrification microorganisms in oxygen utilization.

• 동력기계공학회지
• /
• 제9권1호
• /
• pp.36-41
• /
• 2005

This study investigated the performance of a vortex hydrocyclone for solid removal in a recirculating aquaculture system. In a fish-breeding industry, effluent water is mainly disposed by gravity sedimentation. Thus, a large settling tank and a lot of water are needed to purify effluent water. However, this typical method does not show consistent efficiency. In case of low efficiency, discharged water contains a lot of feeding sediments. This causes environmental problems. Instead of this typical method a hydrocylone is tested to discharge water which contains a lot of feeding sediments. In this paper, a hydrocyclone with low velocity and pressure drop in a recirculating aquaculture system is investigated.

• 한국유체기계학회 논문집
• /
• 제9권5호
• /
• pp.22-27
• /
• 2006

Sedimentation phenomenon of suspended solids occurs by the gravitational force. Pollution particles are separated from slowly flowing waste water in clarifier. Recently, the sludge suction collector is Preferred rather than the scraper type sludge collector due to the enhancement of the clarifier efficiency. The sludge suction collector is usually operated by the user's experiences without any scientific and/or technical consideration. To evaluate the performance of sludge suction collector, the three dimensional numerical simulation was conducted by the finite volume method. To analyze the performance, the velocity vectors and the suction flow rates of the orifices were investigated. The result showed that each suction flow rate through out the collector was equivalent in the sludge suction collector and the efficiency of suction collector was good to remove high concentrated sludge in clarifier.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1851-1856
• /
• 2004

Sedimentation phenomenon of suspended solids occurs by the gravitational force. Pollution particles are separated from slowly flowing wastewater in clarifier. Recently, the sludge suction collector is preferred rather than the scraper type sludge collector due to enhancement of the clarifier efficiency. The sludge suction collector is usually operated by the user's experiences without any scientific and/or technical consideration. To evaluate the performance of sludge suction collector, the three dimensional computer simulation was conducted by the finite volume method. To analyze the performance, the velocity vectors and the suction flow rates of the orifices were investigated. The result showed that each suction flow rate through out the collector was equivalent in the sludge suction collector and the efficiency of suction collector was good to remove high concentrated sludge in clarifier.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2003년도 유체기계 연구개발 발표회 논문집
• /
• pp.415-420
• /
• 2003

Sedimentation phenomenon of suspended solids occurs by the gravitational force. Pollution particles are separated from slowly flowing wastewater in clarifier. Recently, the sludge suction collector is preferred rather than the scraper type sludge collector due to enhancement of the clarifier efficiency. The sludge suction collector is usually operated by the user's experiences without any scientific and/or technical consideration. To evaluate the performance of sludge suction collector, the three dimensional computer simulation was conducted by the finite volume method. To analyze the performance, the velocity vectors and the suction flow rates of the orifices were investigated. The result showed that each suction flow rate through out the collector was equivalent in the sludge suction collector and the efficiency of suction collector was good to remove high concentrated sludge in clarifier.

• 펄프종이기술
• /
• 제33권3호
• /
• pp.44-51
• /
• 2001

Sedimentation characteristics such as SS, $BOD_5$, COD removal efficiency of waste water in the toilet paper mill using milk carton were examined. Optimum dosage of coagulant, rapid mixing time and slow mixing time were determined by turbidity, SS, COD, $BOD_5$ and then equation for treatment efficiency was suggested. Mechanical strength of floc was determined by turbidity. For the coagulant, polyacrylamide (PAM) is more efficient for removing pollution than the aluminium sulfate. Effective mixing ratios of PAM and aluminum sulfate to remove pollution are 70:30 and 30:70. The lowest turbidity was showed when rapid mixing at 300 rpm after coagulant injection was applied. That which indicates the highest point of flocs mechanical strength.

• Journal of Forest and Environmental Science
• /
• 제14권1호
• /
• pp.101-111
• /
• 1998

본 연구에서는 우유팩을 이용하여 재생용 화장지를 만드는 제지공장의 제지폐수를 이용하여 폐수의 침강특성 및 SS, $BOD_5$, 제거 효율을 검토하고, Jar-tester를 이용하여 급속교반시간, 완속교반 시간에 따른 탁도, SS, S-$BOD_5$ 및 최적 응집제 주입량을 결정하였다. 각종 응집제 첨가 및 침강 특성에 의한 탁도제거의 효율을 측정하였다. 적정 응집제 첨가량, 급속교반 및 완속교반의 시간에 따른 처리 효율의 이론식을 제시하였다. 또한 응집제 Polyaluminium chloride(PAC) 및 Aluminium sulfate의 응집 비교 실험을 행하였다.

• 대한환경공학회지
• /
• 제39권7호
• /
• pp.385-390
• /
• 2017

응집 침전기술인 방사능 오염물질의 처리장치의 용존성 Cs 처리특성을 평가하였다. 방사능 오염물질 처리장치는 전흡착부, 고형물침전부, 후흡착부로 구성하였다. 흡착제는 천연광물 일라이트를 입자크기에 따라 LPI (Large Particle Illite), SPI (Small Particle Illite)로 구분하여 사용하였고, 응집제는 고염기도 PAC (poly aluminum chloride)을 사용하였다. 흡착제는 판상구조형태로 주로 석영, 조장석, 백운모로 구성되었으며, LPI, SPI의 Surface area는 각각 $4.201m^2/g$, $4.227m^2/g$으로 나타났고 입자크기는 각각 $197.4-840.9{\mu}m$, $3.28-53.57{\mu}m$로 나타났다. 천연광물인 일라이트의 흡착효율은 LPI는 82.8%, SPI는 85.6%로 나타났고 흡착제 회수에 대한 간접적인 지표인 탁도의 제거율은 96.4%, 98.3%로 나타났다.

• 대한환경공학회지
• /
• 제28권6호
• /
• pp.677-686
• /
• 2006

본 연구의 목적은 기존 정수처리 공정에 하향류식 호기성 생물여과 공정을 설치하였을 때 적정 위치를 선정하고자, 응집/침전 전(Mode A)에 BAF 공정을 설치하였을 때와 응집/침전 후(Mode B)에 BAF 공정을 설치하였을 때의 부유성 입자물질, 유기물, 암모니아성 질소 제거효율을 비교하고자 하였다. 운전결과 입자성물질(turbidity, SS)의 제거효율은 모든 EBCT에 걸쳐 Mode A, B 모두 약 80% 정도의 효율을 보였으며 Mode A에서의 효율이 다소 높은 것으로 조사되었다. 유기물질($BOD_5$) 제거 및 질산화 효율도 90% 이상으로 나타났으며 Mode A에서 의 효율이 더 좋은 것으로 나타났다. 생물막 두께 및 양은 EBCT가 증가할수록 커졌으며, 기질이 유입되는 상부에서 하부에 비해 약 30% 이상 미생물량이 많았다. 비산소소비속도(SOUR)는 기질이 유입되는 반응기 상부, Mode A에서 증가하는 경향을 나타내었으며 약품주입량 비교 시 Mode A가 경제적인 것으로 나타났다. 기존상수처리공정과 Mode A에 대한 경제성 분석결과 연간 응집제를 67%, 염소주입량을 95% 가량 절감할 것으로 조사되었다.

• 상하수도학회지
• /
• 제26권2호
• /
• pp.219-228
• /
• 2012

Problems due to the taste and odor in drinking water are common in treatment facilities around the world. Taste and odor are perceived by the public as the primary indicators of the safely and acceptability of drinking water, and are mainly caused by the presence of two semi-volatile compounds-2-methylisoborneol(2-MIB) and geosmin. Conventional treatment processes in water treatment plants, such as coagulation, sedimentation and chlorination have been found to be ineffective for the removal of 2-MIB and geosmin. Pulse UV system is a new UV irradiation system that is a non-mercury lamp-based alternative to currently used continuous wave systems for water disinfection. This study shows pulse UV system to be effective in treatment of these two compounds. Geosmin removal efficiency of UV process alone achieved approximately 70% at 10sec contact time. 2-MIB removal efficiency of UV only process achieved approximately 60% at 10sec contact time. The addition of $H_{2}O_{2}$ 7mg/L increased geosmin and 2-MIB removal efficiency upto approximately 94% and 91%, respectively.