• Journal of Ocean Engineering and Technology
• /
• v.31 no.4
• /
• pp.308-314
• /
• 2017

The purpose of this study was to investigate the sea floor using a seismic profiler in the northern part of Chagwi-do of Jeju Island in order to select the optimal location for the 60-m-class berth of a sea test bed for wave energy converters and provide basic environmental data for designing a suction anchor. The echo types of the seismic profiles were classified based on the study of Kim et al. (2016a), and the location for installing the suction anchor was selected based on a sediment thickness of more than 10 m. The physical properties of the surface sediments were determined by analyzing the sediment samples obtained from 16 grab sample points. Based on the investigation and analysis, we proposed a survey area in the North-Eastern sea as an optimum location for the 60-m-class berth where the suction anchor could be installed.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2016.05a
• /
• pp.132-134
• /
• 2016

The Study mainly focused on bioremediation of 16 types PAHs and heavy metals in contaminated marine sediments at filed scale study using slow release biostimulant ball (BSB) was investigated. In our experiment, filed scale study ($1m{\times}1m$) was performed and the effect of BSB on PAHs and heavy metals were analysed. BSB size and distance were determined and optimum size and distance were 3cm and 5.5cm respectively. BSB containing nutrients of acetate, nitrate and sulphate which can enhance the activity of microorganism to increase degrading capacity of PAHs and enhance the heavy metals stabilization also to decrease bioavailability. PAHs containing 16 types of 2, 3, 4, 5 and 6 rings compound PAHs were found and to degrade upto 100% in 2, 3 rings, upto 90 to 94% in 4 and 5 rings and 6 ring compound was degrade up to 70%. For heavy metals stabilization percentage was increased using BSB sediment and exchangeable portion was decreased and residual portion was increased in all analysed heavy metals. BSB enhance the PAHs degradation and stabilization of heavy metals percentages. BSB is a promising method for remediation of PAHs and heavy metals in contaminated marine sediments.

• 한국해양학회지
• /
• v.20 no.1
• /
• pp.43-49
• /
• 1985

The Changgu Bay, a macrotidal coastal embayment of the west coast of Korea, is an area of extensive intertidal sedimentation. Three types of major sediment facies are identified based on grain size analysis: silt, sandy-silt, and silty-sand facies. It is found that intertidal sediment facies comprise a continuum of progressively finer sediments from lower flat to upper one. The X-radiography of the cores in the intertidal zone show a wide variety of physical and biogenic sedimentary structures. The major structures include bioturbation, current ripple and parallel-laminae. Bioturbations are observed in all core samples, especially in the silt flat zone. The degree of bioturbation increases laterally from sandy facies (low tide level) to silt facies (high tide level) due to favorable properties of fine mud for organisms. The ripple laminae, composed of current ripple foresets, characterize the silty-sand and sandy-silt flats. The parallel laminae are extensively bioturbated, and two types of laminae are distinguishable; thick-laminae with a thickness of 1 to 5mm and thin-laminae with a thickness of less than 1mm.

• Ocean and Polar Research
• /
• v.25 no.4
• /
• pp.529-543
• /
• 2003

Deep-sea surface sediments, acquired from 1997 to 2002 in the Clarion-Clipperton fracture zone of the northeast equatorial Pacific, were analyzed for index and geotechnical properties to provide background information for the design of manganese nodule minor. The sediments were classified into 16 types based on the measured properties and evaluated in terms of miner maneuverabillity and potential environmental impacts arising from mining activities. It was found that the middle part of the study area covered with coarse siliceous sediments is more favorable to the commercial production than the northern part of pelagic red clay. In particular, Area B2 in the middle part is considered the best mining site since it shows the highest abundance as well as it consists mostly of normally to over consolidated (types B, C, D) coarse siliceous sediments that are appropriate for effective minor movement and accompany weak environmental impacts. Taking account of all the analyzed core logs, the average shear-strength values are proposed as a practical guideline fur movements of a manganese nodule miner: 6.0 kPa at 10cm and 7.0kPa at 40cm below the seabed.

• Water for future
• /
• v.10 no.1
• /
• pp.95-100
• /
• 1977

The empirical area-reduction method by W.M. Borland and C.R. Miller and its revised procedure by W.T. Moody were made of fitting the area and storage curves to the Van't Hul distributions. It should be noted that the reservoir is classified into one of the four standard types on the basis of the topographical feature of the reservoir in application of the method. In other words, this method did not take into account several considerafble factors affecting the mode of sediment deposition, but only the shape of the reservoir as a governign factor. This is why the method occasionally creates ambiguity in classification and accordingly leads to unexpected mode of deposition. This paper describes a generating an formula to decide the standard classification of four types Van's Hul distributions, taking into consideration quantitatively sediment-loss percent and capacity-inflow ratio as well as the shape of the reservoirs by multiple regression analysis using the least square method to get a better fit to the design curves. The result is expressed as $Y=-1.95+55.8X_1+0.14X_2+0.12X_3$ in which the the values of Y locate the standard type I through type IV in the range from ten to forty with the interval of ten. The regression analysis was correlated well with the standard errors of estimate of around two except for the case of the type IV. This formula does not give big difference from the Borland's work in general sityation, but it demonstrates acceptable results, giving somewhat precise replys for the specific reservoirs. Its application to the Soyang Lake, one of the largest reservoirs in the country, defined clearly the type II, while the original method located it in the boundary of the type II and type III.

• Journal of Soil and Groundwater Environment
• /
• v.28 no.5
• /
• pp.25-35
• /
• 2023

This study aimed to classify spring types based on the hydrogeological characteristics of springs in Yongsu-ri~Hamo-ri coastal area in western part of Jeju Island. The springs in study area can be broadly categorized into three groups: perched groundwatrer springs (soil type), perched groundwater springs (sediment type), and basal groundwater springs. The perched groundwater springs of soil type correspond to springs where groundwater seeps out from the perched aquifer formed in the soil layer due to the development of clayey Kosan Formation beneath the surface. Because of the low hydraulic conductivity of soil layer, the average of spring discharge is less than 1 m³/day. The quality of spring water is significantly influenced by agricultural activities, resulting in high nitrate nitrogen concentrations and electrical conductivity. While the perched groundwater springs (sediment type) of the Suwolbong Tuff, which are located in the upper part of Kosan Formation, exhibited relatively higher discharge rates, their water quality was similar to soil-type springs. Basal groundwater springs are located in the zone of basal groundwater, mostly near the coastline. This type of spring appears to discharge of up to 3,707 m³, and the salinity content varies with the tidal fluctuations, especially increasing significantly during dry seasons.

• Journal of Environmental Science International
• /
• v.24 no.12
• /
• pp.1617-1627
• /
• 2015

This study was carried out to investigate the characteristics of suspended solid concentration in small forest watershed, Hwacheon, Gangwondo. For five rainfall events from July 2013 to August 2013, rainfall, discharge, and suspended solid load has been measured. The results showed that the fist flush effect was observed for suspended solid in each rainfall event, sediment rating curve was obtained with $y=30.029x^{1.573}$ at rising limb and $y=12.902x^{1.8827}$ at falling limb, and EMC (event mean concentration) of suspended solid was calculated to 9.4 mg/L. EMC was compared to the values from the watershed that has various land use types and EMC from forest watershed was much lower that from the crop, paddy or low covered forest watershed.

• Journal of Environmental Impact Assessment
• /
• v.13 no.5
• /
• pp.251-262
• /
• 2004

In order to investigate the geochemical characteristics of surface sediments in lower Yeongsan river system, sediment samples from the main stream of Yeongsan river, Gomakwon and Hampyeong streams were collected and analyzed for grain size and metal and organic carbon contents. The sediment types of the streams widely vary from pebble to mud. The metal contents in the sediments are mainly dependent on grain size of the sediments, geology around the streams and organic matter contents from the domestic sewage. Enrichment factor (EF) representing the degree of metal contamination in the sediments are relatively low in the study area. But, high Zn and Pb values seem to be from the study area, partly.

• The Journal of Engineering Geology
• /
• v.17 no.4
• /
• pp.615-621
• /
• 2007

Seismic refraction survey which is assumed to be effective for investigating of the amount of bed sediment was applied to two sites having different soil types. The ten lines of seismic surveys were carried out in the areas of the levee near the Wolchon Bridge, Yongin and the Damam levee, Yecheon. At the same time, two borehole data were obtained to be used in classifying geological formations on the inverted seismic sections. As the results of interpolating the depths of geological formations and the surface elevation values, it is possible to estimate the volume of the bed sediments at $24,000m^3\;and\;56,000m^3$ in Yongin and Yecheon, respectively.

• Journal of Korean Society on Water Environment
• /
• v.24 no.4
• /
• pp.465-472
• /
• 2008

Soil and Water Assessment Tool (SWAT) model was selected as a tool for assessing the effect of pollutant sources on the total loads from the Chungju Dam upstream watershed. The model was constructed through calibration of parameters related to nitrogen (N) and phosphorus (P), which was based on the runoff and sediment modeling performed in the previous research. Using this, the spatial and temporal pollutant loadings by source type were investigated. Results of this study indicated that in most forested upstream sub-watersheds, pollutant loadings from point sources were very low, and total loadings by point and non-point sources were also insignificant. On the other hand, in #14 sub-watershed including Jecheon city, the loadings by point source were relatively considerable. For the whole watershed, non-point sources accounted for 99% of sediment, 97% of N, and 93% of P loads. And monthly non-point source loadings were concentrated on rainy summer season, while point source loadings of N and P kept nearly constant throughout the year and were high on dry winter season relative to non-point source.