• Journal of Power Electronics
• /
• v.15 no.1
• /
• pp.86-95
• /
• 2015

An active clamp high step-up boost converter with a coupled inductor is proposed in this paper. In the proposed strategy, a coupled inductor is adopted to achieve a high voltage gain. The clamp circuit is included to achieve the zero-voltage-switching (ZVS) condition for both the main and clamp switches. A rectifier composed of a capacitor and a diode is added to reduce the voltage stress of the output rectifier diode. As a result, diodes with a low reverse-recovery time and forward voltage-drop can be utilized. Since the voltage stresses of the main and clamp switches are far below the output voltage, low-voltage-rated MOSFETs can be adopted to reduce conduction losses. Moreover, the reverse-recovery losses of the diodes are reduced due to the inherent leakage inductance of the coupled inductor. Therefore, high efficiency can be expected. Firstly, the derivation of the proposed converter is given and the operation analysis is described. Then, a steady-state performance analysis of the proposed converter is analyzed in detail. Finally, a 250 W prototype is built to verify the analysis. The measured maximum efficiency of the prototype is 95%.

• Journal of Power Electronics
• /
• v.13 no.3
• /
• pp.487-496
• /
• 2013

The three-phase synchronous reference frame phase-locked loop (SRF-PLL) is widely used for synchronization applications in power systems. In this paper, a new control strategy for three-phase grid-connected LCL inverters without a PLL is presented. According to the new strategy, a current reference can be generated by using the instantaneous power control scheme and the proposed positive-sequence voltage detector. Through theoretical analysis, it is indicated that a high-quality grid current can be produced by introducing the new control strategy. In addition, a kind of independent control for reactive power can be achieved under unbalanced and distorted grid conditions. Finally, the excellent performance of the proposed control strategy is validated by means of simulation and experimental results.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.2
• /
• pp.461-470
• /
• 2014

This paper presents a probabilistic power flow (PPF) analysis method for distribution network incorporating the randomness and correlation of photovoltaic (PV) generation. Based on the multivariate kernel density estimation theory, the probabilistic model of PV generation is proposed without any assumption of theoretical parametric distribution, which can accurately capture not only the randomness but also the correlation of PV resources at adjacent locations. The PPF method is developed by combining the proposed PV model and Monte Carlo technique to evaluate the influence of the randomness and correlation of PV generation on the performance of distribution networks. The historical power output data of three neighboring PV generators in Oregon, USA, and 34-bus/69-bus radial distribution networks are used to demonstrate the correctness, effectiveness, and application of the proposed PV model and PPF method.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.3
• /
• pp.970-977
• /
• 2014

In this paper, the artificial neural network is used to predict the junction temperature of the IGBT power module, by measuring the temperature sensitive electrical parameters (TSEP) of the module. An experiment circuit is built to measure saturation voltage drop and collector current under different temperature. In order to solve the nonlinear problem of TSEP approach as a junction temperature evaluation method, a Back Propagation (BP) neural network prediction model is established by using the Matlab. With the advantages of non-contact, high sensitivity, and without package open, the proposed method is also potentially promising for on-line junction temperature measurement. The Matlab simulation results show that BP neural network gives a more accuracy results, compared with the method of polynomial fitting.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.4
• /
• pp.961-968
• /
• 2016

The non-uniform distribution of contamination on insulator surface has appreciable effects on flashover voltage, and corresponding researches are valuable for the better selection of outdoor insulation. In this paper, two typical types of porcelain and glass insulators which are widely used in ac lines were taken as the research subjects, and their corrections of AC flashover voltage under non-uniform pollution were studied. Besides, their flashover characteristics under different ratio (T/B) of top to bottom surface salt deposit density (SDD) were investigated, including the analysis of flashover voltage, surface pollution layer conductivity and critical leakage current. Test results gave the modified formulas for predicting flashover voltage of the two samples, which can be directly applied in the transmission line design. Also, the analysis delivered that, the basic reason why the flashover voltage increases with the decrease of T/B, is due to the decrease of equivalent surface conductivity of the whole surface and the decrease of critical leakage current. This research will be of certain value in providing references for outdoor insulation selection, as well as in proposing more information for revealing pollution flashover mechanism.

• Convergence Security Journal
• /
• v.17 no.2
• /
• pp.69-80
• /
• 2017

Due to the advanced IT environment, the role of Security Monitoring & Control becomes more important as the cyber-crime is becoming intelligent, diversified, and advanced. In contrast to the way it relied solely on security devices such as Firewall and IDS in the past, Security Monitoring & Control tasks responding to cyber attacks through real-time monitoring have become wide spread and their role is also important. In response to current cyber threats, since security equipment alone can not be guaranteed a stable defense, the task of Security Monitoring & Control became essential to operate and monitor security equipment and to respond in real time. In this study, we will discuss how to configure network security system effectively and how to improve the real-time Security Monitor & Control.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.635-637
• /
• 2021

Cybersecurity assessment is the process of assessing the risk level of a system through threat and vulnerability analysis to take appropriate security measures. Accurate security evaluation models are needed to prepare for the recent increase in cyberattacks and the ever-developing intelligent security threats. Therefore, we present a risk assessment model through a matrix-based security assessment model analysis that scores by assigning weights across security equipment, intervals, and vulnerabilities. The factors necessary for cybersecurity evaluation can be simplified and evaluated according to the corporate environment. It is expected that the evaluation will be more appropriate for the enterprise environment through evaluation by security equipment, which will help the cyber security evaluation research in the future.

• Korean Security Journal
• /
• no.23
• /
• pp.41-63
• /
• 2010

This study aimed to asses the relationship between shoppers' security need sufficiency and customer satisfaction on the quality of security services in Shopping Mall. This study gathered data from 485 citizen in five shopping centres at KyungKi areas. Collected data was analysed by factor analysis, reliability analysis, path analysis and multiple regression analysis with SPSS WIN 16.0. The results of the study yielded the following four perspectives. First, secure equipment and the service quality of security officers in the shopping malls have a decisive effect on customers psychological stability and crime prevention. Second, they are a strong influence upon customer satisfaction and operational security. Especially, the professionalism of the staff has a marked effect. Third, the service quality of security officers and secure equipment in the malls have an effect on operational security services and efficiency of secure services. Finally, this dissertation showed that the quality of secure equipment services and officers' mild In summary, the conclusion of this study is that secure equipment service, officers' mild manner and professionalism of the security officers affect the customer satisfaction measurement directly. They also affect customer satisfaction through psychological stability and the prevention of crime indirectly. In other words, the good quality of security in the shopping centres affects the using of facilities definitely.

• Carbon letters
• /
• v.25
• /
• pp.55-59
• /
• 2018

Carbon chain inserted carbon nanotubes (CNTs) have been experimentally proven having undergone pronounced property change in terms of electrical conductivity compared with pure CNTs. This paper simulates the geometry of carbon chain inserted CNTs and analyzes the mechanism for conductivity change after insertion of carbon chain. The geometric simulation of Pt doped CNT was also implemented for comparison with the inserted one. The results indicate that both modification by Pt atom on the surface of CNT and addition of carbon chain in the channel of the tube are effective methods for transforming the electrical properties of the CNT, leading to the redistribution of electron and thereby causing the conductivity change in obtained configurations. All the calculations were obtained based on density functional theory method.

• Convergence Security Journal
• /
• v.9 no.2
• /
• pp.33-39
• /
• 2009

The problems of current network security system, separated by a single element is checked. To improve this, this thesis is to find vulnerabilities in the network security systems, and network security systems, security equipment, organic to make sure each works is a comprehensive review. Automation also offers a way to check it, it was implemented.