• 대한수의학회지
• /
• 제6권1호
• /
• pp.82-91
• /
• 1966

Studies On the myelinated fibers of the recurrent laryneal nerves were made in five, species of domestic animals namely dog, pig, goat, horse and Korean ox. Throughout the studies, the following characteristics of the myelinated fibers were obtained. 1. The number, size and cross sectional area of the myelinated fibers seemed to be proportionally related to the animal body weights. 2. The highest peak of diameter size frequency distribution of the myelinated fibers, observed at the right cranial level, in dog, goat and horse were 4-6 micron group, while in the case of Korean ox, 10-12 micron group was the highest. 3. The highest peak of diameter size frequency distribution of the myelinated fibers, observed at the right caudal level of Korean ox was 6-8 micron group, and 4-6 micron group was the highest in the other animals. 4. The highest peak of diameter size frequency distribution of the myelinated fibers obsered at the left cranial level was same to that of right cranial level. 5. The highest peak of diameter size frequency distribution of the myelinated fibers, observed at the left caudal levels in dog, goat, horse and Korean ox was 4-6 micron group, while in case of pig, $14-16{\mu}$ group was the highest. 6. The largest cross sectional areas were found in the group of 10-16 micron in all species of animals. 7. The fiber diameter size frequency distribution of recurrent laryngeal nerves of dog, goat, pig and horse were bimodal and Korean ox seemed to be a unimodal.

• 한국정밀공학회지
• /
• 제20권10호
• /
• pp.148-155
• /
• 2003

In this paper, based on the concept of solid particles' hovering problem the working formula for the channel design of a Decanter-type centrifuge were derived. The Shields' diagram and its curve-fitting formula were used in determining the criterion of particle size for the sediment. By using these formula the designer can determine the sectional configuration of the channel, such as the liquid depth, the normal pitch of the screw-blade arrangement and the bowl diameter.

• Restorative Dentistry and Endodontics
• /
• 제30권2호
• /
• pp.95-101
• /
• 2005

이 연구의 목적은 근단공의 크기가 다양한 치아에서 근단공 확대의 유무에 따른 근관성형시 치아의 미세누출을 평가하기 위함이다. 1근관 치아 60개를 치근첨 상방 5mm에서 절단후 각 치아의 근단공 크기에 따라 큰 근단공 (L) 작은 근단공 (S)으로 나누었다 이 두 군을 치근첨 상방 5mm의 횡단면상 근관의 형태로 원형 (R)과 난형 (O)으로 나누었다(SR, SO, LR, LO). 각 군은 Quantec series Nickel-Titanium (Ni-Ti) rotary file을 이용하여 .02 taper로 성형 후 측방가압법으로 충전하였다. 누출은 40 $cmH_2O$ 압력하에 fluid transport method로 측정하였다. 측정 후 누출이 있는 시편은 .04 taper와 .06 taper로 재근관치료 하여 다세 미세누출을 평가하였다. 통계학적으로 chi-square test와 fisher's exact test를 이용하였다. 결과는 다음과 같다. 1. .02 taper로 성형한 군에서는 근단공의 크기에 따른 미세누출은 통계적으로 유의성이 있었고 (p < 0.05) .04 taper로 성형한 군에서는 통계적으로 유의한 차이를 보이지 않았다 (p > 0.05) .2.근첨 상방 5 mm에서 근관단면의 형태에 따른 미세누출은 통계적으로 유의하지 않았다 (p > 0.05). 3. LR group과 LO group에서는 .02 taper로 성형한 군과 .04 taper로 성형한 군사이에 유의한 차이를 보였다 (p < 0.05).

• The Journal of Korean Physical Therapy
• /
• 제24권2호
• /
• pp.66-72
• /
• 2012

Purpose: The purpose of this study is to explore the importance of the image distortion correction in the cross sectional area measurement for the iliopsas muscle, tensor fasciae latae muscle, gluteus maximus muscle and the knee extensor muscles, by using (magnetic resonance imaging) MRI. Methods: This study was performed using an open 0.32T MRI system. To estimate the image distortion, T1 images for an AAPM homogeneity/linearity phantom were acquired, and the region in which the maximum geometric distortion was less than or equal to the pixel size (1.6 mm) of the images, it was defined as the distortion correction-free region. The T2 images for a human subject's pelvis and thigh in normal positions were obtained. Then, after the regions of interest in the pelvis and thigh were moved into the distortion correction-free region, T2 images for the pelvis and thigh were scanned with the same imaging parameters used in the previous T2 imaging. The cross-sectional areas were measured in the two T2 images that were obtained in the normal position, and the distortion correction-free region, as well as the area error caused by geometric image distortion was calculated. Results: The geometrical distortion is gradually increased, from the magnet center to the outer region, in axial and coronal plane. The cross-sectional area error of gluteus maximus muscle and the knee extensors was as high as 9.27% and 3.16% in before and after distortion correction, respectively. Conclusion: The cross-sectional area of the muscles that suffered from the geometrical distortion is necessary to correct for the estimation of the intervention.

• 대한기계학회논문집A
• /
• 제34권3호
• /
• pp.299-305
• /
• 2010

가변성형 공정에서 동일한 크기의 성형펀치 배열로 구성된 가변금형을 이용하는 경우 펀치의 크기가 일정하여 성형 가능한 곡률 반경이 제한되기 때문에 비교적 유연성이 낮다. 이에 본 연구에서는 가변금형의 유연성을 높이기 위하여 분할가변금형에 대한 개념을 제안하였다. 임의의 성형면을 형성하기 위하여 두 가지 크기의 펀치로 구성된 펀치 블록을 착안하였다. 상대적으로 큰 곡률 반경을 갖는 성형영역에 대해서는 크기가 큰 펀치 블록을 적용하였으며, 작은 곡률 반경을 갖는 성형영역에 대해서는 작은 크기의 펀치로 구성된 펀치 블록을 적용하였다. 해석적 연구를 토대로 성형된 제품의 단면 형상을 비교하였으며 이로부터 서로 다른 크기의 펀치 블록을 조합하여 구성한 분할가변금형을 이용한 판재의 성형공정이 비교적 복잡한 곡률 반경 분포를 갖는 곡면 가공에 적합함을 확인하였다.

• 한국지진공학회논문집
• /
• 제18권4호
• /
• pp.201-212
• /
• 2014

The plastic hinge region of RC pier ensures its nonlinear behavior during strong earthquake events. It is assumed that the piers secure sufficient strength and ductility in order to prevent the collapse of the bridge during strong earthquake. However, the presence of a lap-splice of longitudinal bars in the plastic hinge region may lead to the occurrence of early bond failure in the lap-splice zone and result in significant loss of the seismic performance. The current regulations for seismic performance evaluation limit the ultimate strain and displacement ductility considering the eventual presence of lap-splice, but do not consider the lap-splice length. In this study, seismic performance test and analysis are performed according to the cross-sectional size and the lap-splice length in the case of longitudinal bars with lap-splice located in the plastic hinge region of existing RC bridge columns with circular cross-section. The seismic behavioral characteristics of the piers are also analyzed. Based upon the results, this paper presents a more reasonable seismic performance evaluation method considering the lap-splice length and the cross-sectional size of the column.

• Journal of Biosystems Engineering
• /
• 제18권2호
• /
• pp.100-109
• /
• 1993

The aim of this study was to provide the reasonable data for design of the nozzle which produces finer droplets on the same level of the effective travel distance or which transports droplets to the farther target on the reasonable atomization in comparison with the commercial nozzles being used much in Korean rural areas. Newly designed twin-fluid atomizers with some commercial nozzles were tested in this study, and their results were as follows : 1. The characteristics of the spray deposit distribution of No.1 nozzles for farther target were nearly same in the near or nearer travel distance less than 8m. Therefore it was reasonable to combine the characteristics of the spray deposit distributions of No.2 and No.3 nozzles to those of No.1 nozzle. 2. The effective travel distance was increased with increase of the sectional area of the jet ligament, and the maximum effective travel distance was reached to about 17m. 3. The droplet size was increased with increase of the sectional area of the jet ligament, and the maximum droplet size was produced in the front of the point of the maximum spray deposit distribution. 4. The atomization was excellent in the twin-fluid atomizer in comparison with the hydraulic atomizer and also the effective travel distances were nearly same level in both atomizers.

• 대한기계학회논문집B
• /
• 제23권5호
• /
• pp.670-677
• /
• 1999

An analysis of generation and growth of multicomponent particles has been carried out to predict the size and composition distributions of particles generated in the Modified Chemical Vapor Deposition(MCVD) process. In MCVD process. scale-up of sintering and micro-control of refractive index may need the Information about the size and composition distributions of $SiO_2-GeO_2$ particles that are generated and deposited. The present work solved coupled steady equations (axi-symmetric two dimensions) for mass conservation, momentum balance. energy and species(such as $SiCl_4$, $GeCl_4$, $O_2$, $Cl_2$) conservations describing fluid flow. heat and mass transfer in a tube. Sectional method has been applied to obtain multi-modal distributions of multicomponent aerosols which vary in both radial and axial directions. Chemical reactions of $SiCl_4$ and $GeCl_4$ were included and the effects of variable properties have also been considered.

• Steel and Composite Structures
• /
• 제19권3호
• /
• pp.661-678
• /
• 2015

Buckling Restrained Braces (BRB) have been widely used in the construction industry as they utilize the most desirable properties of both constituent materials, i.e., steel and concrete. They present excellent structural qualities such as high load bearing capacity, ductility, energy-absorption capability and good structural fire behaviour. The effects of size and type of filler material in the existed gap at the steel core-concrete interface as well as the element's cross sectional shape, on BRB's fire resistance capacity was investigated in this paper. A nonlinear sequentially-coupled thermal-stress three-dimensional model was presented and validated by experimental results. Variation of the samples was described by three groups containing, the steel cores with the same cross section areas and equal yield strength but different materials (metal and concrete) and sizes for the gap. Responses in terms of temperature distribution, critical temperature, heating elapsed time and contraction level of BRB element were examined. The study showed that the superior fire performance of BRB was obtained by altering the filler material in the gap from metal to concrete as well as by increasing the size of the gap. Also, cylindrical BRB performed better under fire conditions compared to the rectangular cross section.

• 설비공학논문집
• /
• 제9권4호
• /
• pp.552-560
• /
• 1997

Analysis is performed to determine the optimal lengths or cross-sectional areas of refrigerator-cooled current leads that can be applied to the conduction-cooled superconducting systems. The binary current lead is composed of the series combination of a normal metal at the upper(warm) part and a high $T_c$ superconductor(HTS) at the lower(cold) part. The heat conduction toward the cold end of HTS part constitutes a major refrigeration load. In addition, the joint between the parts should be cooled by a refrigerator in order to reduce the load at the low end and maintain the HTS part in a superconducting state. The sum of the work inputs required for the two refrigeration loads needs to be minimized for an optimal operation. In this design, three simple models that depict the refrigeration performance as functions of cooling temperature are developed based on some of the existing refrigerators. By solving one-dimensional conduction equation that take into account the temperature-dependent properties of the materials, the refrigeration works are numerically calculated for various values of the joint temperature and the sizes of two parts. The results show that for given size of HTS, there exist the optimal values for the joint temperature and the size of the normal metal. It is also found that the refrigeration work decreases as the length of HTS increases and that the optimal size of normal metal is quite independent of the size of HTS. For a given length of HTS, there is an optimal cross-sectional area and it increases as the length increases. The dependence of the optimal sizes on the refrigerator models employed are presented for 1kA leads.