• Geomechanics and Engineering
• /
• v.27 no.5
• /
• pp.433-445
• /
• 2021

Artificial ground freezing (AGF) is a commonly used geotechnical support technique that can be applied in any soil type and has low environmental impact. Experimental and numerical investigations have been conducted to optimize AGF for application in diverse scenarios. Precise simulation of groundwater flow is crucial to improving the reliability these investigations' results. Previous experimental research has mostly considered horizontal seepage flow, which does not allow accurate calculation of the groundwater flow velocity due to spatial variation of the piezometric head. This study adopted vertical seepage flow-which can maintain a constant cross-sectional area-to eliminate the limitations of using horizontal seepage flow. The closure time is a measure of the time taken for an impermeable layer to begin to form, this being the time for a frozen soil-ice wall to start forming adjacent to the freeze pipes; this is of great importance to applied AGF. This study reports verification of the reliability of our experimental apparatus and measurement system using only water, because temperature data could be measured while freezing was observed visually. Subsequent experimental AFG tests with saturated sandy soil were also performed. From the experimental results, a method of estimating closure time is proposed using the inflection point in the thermal conductivity difference between pore water and pore ice. It is expected that this estimation method will be highly applicable in the field. A further parametric study assessed factors influencing the closure time using a two-dimensional coupled thermo-hydraulic numerical analysis model that can simulate the AGF of saturated sandy soil considering groundwater flow. It shows that the closure time is affected by factors such as hydraulic gradient, unfrozen permeability, particle thermal conductivity, and freezing temperature. Among these factors, changes in the unfrozen permeability and particle thermal conductivity have less effect on the formation of frozen soil-ice walls when the freezing temperature is sufficiently low.

• Journal of dental hygiene science
• /
• v.23 no.2
• /
• pp.132-141
• /
• 2023

Background: The purpose of this study was to identify the connection between handwashing and toothbrushing, focusing on eating habits, and to verify whether eating habits can be used as an action cue for forming health habits. Methods: This was a cross-sectional study using secondary data from the 2019 community health survey. The participants included 229,099 adults aged 19 years or older, representative of the South Korean people. We employed two dependent variables: one was washing hands, and the other was brushing teeth. Eating habits was a major independent variable. Socioeconomic variables, such as age, gender, income, occupation, economic activity, education, and residence were adjusted as confounders. Multivariate logistic regression was performed to calculate adjusted odds ratio and 95% confidence intervals. Results: Most of the participants had good health behaviors: those who wash their hands and brush their teeth were each approximately 80%. Our finding indicated that brushing teeth and washing hands can be connected with eating habits. After adjusting for confounders, it was found that people who wash their hands before meals (compared to those who did not wash their hands before meals) had a higher toothbrushing rate after meals (i.e., socioeconomic status) (Adjusted Odds Ratio: 2.0, Confidence Intervals: 1.9 to 2.1). Conclusion: Those who practice either washing hands before meals or brushing teeth after meals were found to have a connection between washing hands and brushing teeth based on the results of practicing other health behaviors. This implies that eating habits can be connected as a behavior cue to promote health habits, such as washing hands before meals and brushing teeth after meals.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.5
• /
• pp.20-28
• /
• 2014

The high velocity oxygen fuel spraying (HVOF) is a kind of surface modification process technology to form the sprayed coating layer after spraying the powder to molten or semi-molten state by the ultra-high speed at the high-temperature heat source and conflicting with a substrate. It is desirable to melt completely the thermal spray powder in order to produce the coating layer with an optimal adhesion, however, because a semi-molten powder in a spray process has the low efficiency and become a factor that degrades the mechanical property by the inducement of pore-forming within the coating layer. To improve the wear resistance, corrosion resistance and heat resistance, in this study, the plungers of high-speed and ultra-high pressure reciprocating hydraulic pumps for oil and water used in ironwork are produced with $420J_2$ and the coating layers of plungers are formed by the powders of WC-Co-Cr and WC-Cr-Ni including the high hardness WC. The surface of these plungers is modified by the super-mirror face grinding machine using variable air pressure developed in this laboratory, and then the characteristics of cross-sectional microstructure, and surface roughness and hardness values between no operation and 100 days-operation are examined and made a comparison. The fine tops and bottoms on surface roughness curve of oil-hydraulic pump plunger sprayed by WC-Cr-Ni are molded more and higher than those of water-hydraulic pump sprayed by WC-Co-Cr because the plunger diameter of oil-hydraulic pump is 0.4 times smaller than that of water-hydraulic pump and the pressure of oil-hydraulic pump exerted on the plunger is operated with the 70 bars higher than that of water-hydraulic pump. As a result, it is found that the values of centerline average surface roughness and maximum height for oil-hydraulic pump plunger are bigger than those of water-hydraulic pump plunger.

• Information Systems Review
• /
• v.15 no.1
• /
• pp.105-122
• /
• 2013

Given the proliferation of social network services, it has become important to understand its user's continued use behavior. As users' privacy concerns in SNS have been identified as a critical barrier against forming this continued intention, many studies have focused on inducing continued intention by mitigating privacy concerns. However, this paper suggests to approach users' continued intention not only from the perspective of mitigating privacy concerns but also from the perspective of increasing potential benefits. Under the theoretical framework of privacy calculus model, we conducted cross sectional survey on 150 Facebook and 150 KakaoTalk users. The result suggests that trust mediates the relationships between privacy concerns and continued intention and between network externality and continued intention, and the influence of support for network formation on continued intention. The effect of network externality on continued intention, however, is not significant among Facebook users while it is significant among KakaoTalk users.