• 임상간호연구
• /
• 제17권2호
• /
• pp.239-250
• /
• 2011

Purpose: This study was aimed to evaluate the effects of Labor Support Behaviors (LSB) one-to-one application and partner's delivery participation on the delivery satisfaction and delivery results among mothers who delivered premature birth and low birth weight infant. Methods: The data were collected from 30 mothers in the experimental group and 27 in the control group from April 23, 2009 to April 22, 2010. The collected data were analyzed using percentage, mean, standard deviation, $x^2-test$ (Fisher's exact test) and t-test with SPSS. Results: The satisfaction levels of the experimental group and the control group women were $3.73{\pm}0.43$ and $3.72{\pm}0.34$ as mean values, respectively, showing not statistically different (t=0.07, p=.945). None showed less than 7 point of Apgar score at 1 minute in the experimental group while 5 out of 27 did (18.5%) in the control group, which was statistically meaningful. Also, the emergent cesarian section cases were 3 out of 33 (9.1%) in the experimental group and 5 out of 32 (15.6%) in the control group, demonstrating lower emergency cesarian section rate in the experimental group than the control group, but showing not statistically different ($x^2=0.643$, p=.475). Conclusion: The results of this study show that LSB one-to-one application and partner's participation has affirmative effects on 1 minute Apgar scores of newborns.

• 한국산학기술학회논문지
• /
• 제18권3호
• /
• pp.249-257
• /
• 2017

신뢰성 있는 통행시간 예측을 위해 DSRC로부터 수집된 통행시간에서의 이상치(outlier) 필터링은 필수이다. 통행시간 예측을 위해 사용되는 보편적 기법인 TRANSGUIDE는 특정 분석 시간동안 통행시간의 변동이 크게 발생하는 조건에서 수집데이터의 이상치 제거를 효율적으로 처리하지 못하는 문제점이 존재한다. 이에 본 연구에서는 TRANSGUIDE의 한계점 을 보완할 수 있는 알고리즘을 제안하고자 한다. TRANSGUIDE가 특정 분석 시간대 충분한 데이터 관측이 어려울 경우 Median Absolute Deviation(MAD)를 이용하여 이상치 제거를 위한 새로운 유효 분석 영역을 설정하였다. 새로운 분석 영역 설정 후 특정 시간대 교통 조건하에서 최대 허용 가능한 이상치를 고려한 변수 ${\alpha}$, ${\beta}$를 제안하였다. 변수 ${\alpha}$, ${\beta}$를 추정하기 위해 과거 데이터와 도로 구간의 특성을 반영하였다. 개발된 알고리즘은 수도권 일반국도 3호선, 2013년 1월 1달간 DSRC 데이터가 존재하는 다차로 일반국도에 적용하였다. 누적상대도수를 이용하여 모형의 정산 수행 후 성능에 대해 정량적 평가를 수행하였다. 개발된 알고리즘은 기존의 TRANSGUIDE가 특정 조건, 즉 일정 분석 시간동안 교통 조건이 급하게 변동되는 구간에서 이상치 제거에 취한한 점을 보완하는 것으로 판단되었다. TRANSGUDIDE가 특정 조건에서 통행시간 예측이 어려울 경우 본 개발 알고리즘은 활용될 것으로 판단한다.

• Smart Structures and Systems
• /
• 제16권6호
• /
• pp.1107-1132
• /
• 2015

A damage detection algorithm based on neuro fuzzy hybrid system is presented in this study for location and severity predictions of cracks in beam-like structures. A combination of eigenfrequencies and rotation deviation curves are utilized as input to the soft computing technique. Both single and multiple damage cases are considered. Theoretical expressions leading to modal properties of damaged beam elements are provided. The beam formulation is based on Euler-Bernoulli theory. The cracked section of beam is simulated employing discrete spring model whose compliance is computed from stress intensity factors of fracture mechanics. A hybrid neuro fuzzy technique is utilized to solve the inverse problem of crack identification. Two different neuro fuzzy systems including grid partitioning (GP) and subtractive clustering (SC) are investigated for the highlighted problem. Several error metrics are utilized for evaluating the accuracy of the hybrid algorithms. The study is the first in terms of 1) using the two models of neuro fuzzy systems in crack detection and 2) considering multiple damages in beam elements employing the fused neuro fuzzy procedures. At the end of the study, the developed hybrid models are tested by utilizing the noise-contaminated data. Considering the robustness of the models, they can be employed as damage identification algorithms in health monitoring of beam-like structures.

• Wind and Structures
• /
• 제26권4호
• /
• pp.231-251
• /
• 2018

The objective of the investigation is the analysis of wind-tunnel experimental errors, associated with the measurement of aeroelastic coefficients of bridge decks (Scanlan flutter derivatives). A two-degree-of-freedom experimental apparatus is used for the measurement of flutter derivatives. A section model of a closed-box bridge deck is considered in this investigation. Identification is based on free-vibration aeroelastic tests and the Iterative Least Squares method. Experimental error investigation is carried out by repeating the measurements and acquisitions thirty times for each wind tunnel speed and configuration of the model. This operational procedure is proposed for analyzing the experimental variability of flutter derivatives. Several statistical quantities are examined; these quantities include the standard deviation and the empirical probability density function of the flutter derivatives at each wind speed. Moreover, the critical flutter speed of the setup is evaluated according to standard flutter theory by accounting for experimental variability. Since the probability distribution of flutter derivatives and critical flutter speed does not seem to obey a standard theoretical model, polynomial chaos expansion is proposed and used to represent the experimental variability.

• Nuclear Engineering and Technology
• /
• 제48권3호
• /
• pp.642-649
• /
• 2016

Important safety parameters such as the fuel temperature coefficient (FTC) and the power coefficient of reactivity (PCR) of the CANada Deuterium Uranium (CANDU-6) reactor have been evaluated using the Monte Carlo method. For accurate analysis of the parameters, the Doppler broadening rejection correction scheme was implemented in the MCNPX code to account for the thermal motion of the heavy uranium-238 nucleus in the neutron-U scattering reactions. In this work, a standard fuel lattice has been modeled and the fuel is depleted using MCNPX. The FTC value is evaluated for several burnup points including the mid-burnup representing a near-equilibrium core. The Doppler effect has been evaluated using several cross-section libraries such as ENDF/B-VI.8, ENDF/B-VII.0, JEFF-3.1.1, and JENDL-4.0. The PCR value is also evaluated at mid-burnup conditions to characterize the safety features of an equilibrium CANDU-6 reactor. To improve the reliability of the Monte Carlo calculations, we considered a huge number of neutron histories in this work and the standard deviation of the k-infinity values is only 0.5-1 pcm.

• 한국전산유체공학회지
• /
• 제22권1호
• /
• pp.81-87
• /
• 2017

The characteristics of flow past a square cylinder submerged under the free surface have been numerically studied. An immersed boundary method was adopted for implementation of the cylinder cross-section in a Cartesian grid system. Also, a level-set method was used to capture the interface of the two fluids. The case for Reynolds number 150 was examined. At the specific Reynolds number, by varying the gap ratio(0.25, 0.40, 0.55, 0.70, 1.00, 1.50, 2.50, 5.00) the effects of the free surface on the force coefficients and Strouhal number of vortex shedding were identified. The presence of the free surface very close to the cylinder significantly affects the shedding pattern, resulting in considerable deviation of the force coefficients and Strouhal number from those of the single-phase flow. In addition, the influence of Froude number was considered in this study. By increasing Froude number(0.2-0.4), flow topology change was identified at the specific gap ratios(0.40, 0.70, 1.50, 5.00).

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2001년도 추계학술대회 논문집(Proceeding of the KOSME 2001 Autumn Annual Meeting)
• /
• pp.28-35
• /
• 2001

The heat transfer and pressure drop characteristics of R718 flowing in smooth horizontal copper tubes with inner diameter of 3.36 mm, 5.35 mm, 6.54 mm and 8.12 mm were investigated. The test section is a counterflow heat exchanger with refrigerant flowing in the inner tube and water flowing in the annulus. Experiments were peformed for the flowing range of variables : Reynolds number (1000 to 20000), mass flow rate of brine (450 kg/h) and refrigerant temperature (5$0^{\circ}C$). The main results were summarized as follows : (1) The heat transfer coefficient of 3.36 mm ID was about 10% to 30% higher than that of 5.35 mm, 6.54 mm and 8.12 mm ID, and the heat transfer coefficients for small diameter. tubes are about 20% to 27% higher than these predicted by Gnielinski. The new correlation is proposed to predict the experimental data. (2) As a result of comparison with correlation prosed by Blasius. the deviation of the experimental data slightly increased as the tube diameter decreased. (3) The ratio of heat transfer to friction factor (j/f) correlated by all experimental data increased as the tube diameter decreased.

• 대한원격탐사학회지
• /
• 제34권4호
• /
• pp.639-647
• /
• 2018

This paper presents TerraSAR-X and KOMPSAT-5 sigma nought variation according to season and antenna observation configuration in Mongolia. Two types of landcover including bare surface and cropland were examined. The seasonal variation of sigma nought in cropland was about 7 dB and particularly a significant sigma nought reduction occurred after harvest. On the contrary, the Mongolia bare surface provides a consistent sigma nought values for several years with an annual variation less than 2.5 dB of standard deviation. However, the bare soil was relatively sensitive to look-direction (or ascending or descending mode) as well as incidence angle while the cropland was almost independent of antenna look-direction and small incidence angle changes. Although the look-directional variation of bare surface sigma nought was observed in this study, the look-direction anisotropic nature of the surface was not well examined. A further study would be required to account for this feature with various SAR observation configurations.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2005년도 동계학술발표대회 논문집
• /
• pp.256-261
• /
• 2005

In the present experimental study, condensation heat transfer coefficients between R404A and R152a flow in a horizontal smooth tube were compared. The outer and inner diameters of the tube were 9.52 mm and 7.55 mm, respectively, and the heated length was 1045 mm. The mass flux ranged from 150 to 400 $kg/m^{2}s$ and the test section were uniformly heated from 8 to 12. $kW/m^2$. The quality range was from 0.2 to 0.8 at the saturation temperature from 27.3 to $34^{\circ}C$. Experimental condensation heat transfer coefficients increased as the quality and mass flux increased. Modified Dobson and Chato correlation reduced the mean deviation of 5.1% for R404A and 9.4% for R152a than the original correlation$^{(2)}$.

• 대한인간공학회지
• /
• 제21권1호
• /
• pp.67-80
• /
• 2002

An efficient torso pattern has been developed to cope with the future trend of order-based, individualized production like the E.C.(Electronic Commerce) in the apparel industry, and to make a database foundation of automatic garment pattern drafting. For this purpose, a non-contact three-dimensional anthropometric measurement system was used to provide a lot of accurate body data for better individual fit, and an automatic pattern drafting system that can easily generate various size patterns and construct a pattern database has been developed too. The subjects of this research were 18 to 24 year-old women whose data had been gathered through the Korean national investigation of anthropometry for industrial standards in 1997 and various body shapes were analyzed by the measurements. And a special software system has been developed to verify the validity of newly proposed drawing rules. The results of sensory evaluation for appearance and moving fitness of the new torso pattern showed a significant improvement in individual fit even for the figures with large deviation from standard shape compared with the results of the traditional one.