• 지질공학
• /
• 제25권4호
• /
• pp.439-447
• /
• 2015

In this study, specific sections vulnerable to debris flow damage were selected, and a complete enumeration survey was performed for the sections with debris flow hazards. Based on this, the characteristics of the sections with debris flow hazards and the current status of actions against debris flow were examined, and an efficient installation plan for a debris flow damage prevention method that is required in the future was suggested. The results indicated that in the Route 56 section where the residential density is relatively higher between the two model survey sections, facilities for debris flow damage reduction were insufficient compared to those in the Route 6 section which is a mountain area. It is thought that several sites require urgent preparation of a facility for debris flow damage reduction. In addition, a numerical analysis showed that for debris barriers installed as a debris flow damage prevention method, distributed installation of a number of small-scale barriers facilities within a valley part was more effective than single installation of a large-scale debris barrier at the lower part of a valley.

• 한국지진공학회논문집
• /
• 제26권6호
• /
• pp.255-265
• /
• 2022

In order to determine fragility curves, the limit state of piers for each damage level is suggested in this paper based on the previous test results in Korea, including our test results. In previous studies, the quantitative measures for damage levels of piers have been represented by curvature ductility, lateral drift ratio, or displacement ductility. These measures are transformed to lateral drift ratios of piers for consistency, and the transformed values are compared and verified with our push-over test results for flexural RC piers with a circular cross-section. The test specimens are categorized concerning the number of lap-splices in the plastic hinge region and whether seismic design codes are satisfied or not. Based on the collected test results in Korea, including ours, the lateral drift ratio for each pier damage level is suggested.

• 문화기술의 융합
• /
• 제10권3호
• /
• pp.845-849
• /
• 2024

현재 도시철도 레일의 노후화로 인한 레일표면결함이 증가하고 있으나 국가에서 제정된 궤도성능평가에 관한 세부지침에서 레일표면손상을 기술자의 육안, 간단한 측정 도구로 점검을 수행하는 실정이다. 주기적인 선로순회작업 및 육안점검을 통해 레일표면의 결함을 발견하는 것은 매우 중요하다. 그러나 점검자의 주관적 판단에 의해 레일표면의 결함의 경중을 평가하는 것은 레일 내부의 손상을 예측하기에 상당한 제약이 따른다. 본 연구에서는 레일표면손상에 따른 레일내부 균열특성에 관한 연구로서 현장측정에서는 레일표면 손상개소를 선정하여 가속구간 및 제동구간의 노후레일 시료를 채취하여 레일표면손상 상태를 평가하고자 전자주사현미경(SEM)을 이용하여 균열특성을 분석하였다. 분석결과, 주행 중인 열차로 인해 발생하는 균열 메커니즘과 레일표면방향으로 올라오는 각도로 균열이 발생하는 가속구간의 균열특성을 실험적으로 입증하였다.

• Advances in concrete construction
• /
• 제1권2호
• /
• pp.187-200
• /
• 2013

The damage level in structures (global scale), elements (intermediate scale) and sections (local scale) can be evaluated using a single parameter called the "Damage Index". Part of the damage attributed to the local scale relates to the damage sustained by the materials of which the section is made. This study investigates the damage of concrete subjected to monotonic compressive loading using four different damage models - one proposed here for the first time and three other well-known models. The analytical results show that the proposed model is promising yet simple and effective for evaluating the damage of concrete. The proposed damage model of concrete with its promising characteristics indicated, appears to be a useful tool in the damage assessment of structures made of concrete.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(I)
• /
• pp.335-338
• /
• 2005

This study was performed to verify that the impact vibration test on the damaged concrete pier can be adopted for assessment of the bridge substructure integrity. Using the experimental modal analysis, the dynamic property changes of the concrete pier are investigated according to the damage levels which are modeled by the loss of cross section area of the pier body. As a result of the impact vibration test, it is found that the natural frequency of the bridge substructure is reduced due to the damage on the pier such as loss of cross section area, and the natural frequency can be used for assessment of the integrity index.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1997년도 Proceedings of the 13th KACG Technical Meeting `97 Industrial Crystallization Symposium(ICS)-Doosan Resort, Chunchon, October 30-31, 1997
• /
• pp.155-159
• /
• 1997

We investigated the effect of mechanical backside damage in Czochralski silicon wafer. The intensity of mechanical damage were evaluated by minority carrier recombination lifetime by a laser excitation/microwave reflection photoconductance decay method, photo-acoustic displacement method, X-ray section topography, and wet oxidation/preferential etch methods. The data indicate that the higher the mechanical damage intensity, the lower the minority carrier lifetime, and the photoacoustic displacement values are also increased proportionally.

• Earthquakes and Structures
• /
• 제8권3호
• /
• pp.485-509
• /
• 2015

This paper presents the experimental results obtained by applying frequency-domain structural health monitoring techniques to assess the damage suffered on a special type of damper called Web Plastifying Damper (WPD). The WPD is a hysteretic type energy dissipator recently developed for the passive control of structures subjected to earthquakes. It consists of several I-section steel segments connected in parallel. The energy is dissipated through plastic deformations of the web of the I-sections, which constitute the dissipative parts of the damper. WPDs were subjected to successive histories of dynamically-imposed cyclic deformations of increasing magnitude with the shaking table of the University of Granada. To assess the damage to the web of the I-section steel segments after each history of loading, a new damage index called Area Index of Damage (AID) was obtained from simple vibration tests. The vibration signals were acquired by means of piezoelectric sensors attached on the I-sections, and non-parametric statistical methods were applied to calculate AID in terms of changes in frequency response functions. The damage index AID was correlated with another energy-based damage index -ID- which past research has proven to accurately characterize the level of mechanical damage. The ID is rooted in the decomposition of the load-displacement curve experienced by the damper into the so-called skeleton and Bauschinger parts. ID predicts the level of damage and the proximity to failure of the damper accurately, but it requires costly instrumentation. The experiments reported in this paper demonstrate a good correlation between AID and ID in a realistic seismic loading scenario consisting of dynamically applied arbitrary cyclic loads. Based on this correlation, it is possible to estimate ID indirectly from the AID, which calls for much simpler and less expensive instrumentation.

• 한국해안해양공학회지
• /
• 제19권2호
• /
• pp.113-127
• /
• 2007

본 연구에서는 직립 방파제 케이슨의 활동에 따른 복구비용, 과도한 케이슨 활동 발생시 항만 폐쇄에 따른 경제적 피해 비용 그리고 월파에 의한 일시적 작업 중단에 따른 경제적 피해 비용을 동시에 고려하는 기대 총 건설비 산정 모델을 수립하였다. 발생시점이 서로 다른 피해 비용을 일정한 기준으로 산정하기 위해 할인율을 적용하였다. 케이슨의 최적 단면은 방파제 수명 동안의 기대 활동량의 허용범위 내에서 기대 총 건설비용이 최소가 되는 단면으로 정의되며, 그 기대 활동량의 허용치는 0.3 m와 0.1 m 두 가지 경우에 대해 살펴보았다. 과도한 케이슨 활동에 의한 항만 폐쇄에 따른 경제적 피해 비용과 그 산정 기준이 케이슨 복구비용이나 월파에 의한 작업 중단에 따른 경제적 피해 비용보다 최적 단면 결정에 더 중요한 요인임을 확인하였고, 항만 폐쇄에 대한 케이슨 활동량의 임계 칼이 커질수록 케이슨의 최적 단면은 기대 총 건설비의 최소점보다 기대 활동량의 허용치에 의해 결정되는 것으로 나타났다.

• Nuclear Engineering and Technology
• /
• 제53권7호
• /
• pp.2407-2417
• /
• 2021

A structural integrity evaluation program (STEP) was developed for the high temperature reactor design evaluation according to the ASME Boiler and Pressure Vessel Code (ASME B&PV), Section III, Rules for Construction of Nuclear Facility Components, Division 5, High Temperature Reactors, Subsection HB. The program computerized HBB-3200 (the design by analysis procedures for primary stress intensities in high temperature services) and Appendix T (HBB-T) (the evaluation procedures for strain, creep and fatigue in high temperature services). For evaluation, the material properties and isochronous curves presented in Section II, Part D and HBB-T were computerized for the candidate materials for high temperature reactors. The program computerized the evaluation procedures and the constants for the weldment. The program can generate stress/temperature time histories of various loads and superimpose them for creep damage evaluation. The program increases the efficiency of high temperature reactor design and eliminates human errors due to hand calculations. Comparisons that verified the evaluation results that used the STEP and the direct calculations that used the Excel confirmed that the STEP can perform complex evaluations in an efficient and reliable way. In particular, fatigue and creep damage assessment results are provided to validate the operating conditions with multiple types of cycles.

• 한국독성학회:학술대회논문집
• /
• 한국독성학회 2001년도 International Symposium on Signal transduction in Toxicology
• /
• pp.123-123
• /
• 2001

The distribution of necrotic and apoptotic neural cells, and expression of astrocytic glial fibrillary acidic protein (GFAP) in the brain of rats poisoned intraperitoneally with diisopropylfluorophosphate were investigated. Pyridostigmine bromide (0.1 mg/kg) and atropine methylnitrate (20 mg/kg), which are centrally inactive, were treated intramuscularly 30 min and 10 min, respectively, before diisopropylfluorophosphate (4 - 10 mg/kg) poisoning to reduce the mortality.(omitted)