• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.4
• /
• pp.493-500
• /
• 2013

In this study, it was evaluated the protective performance of the protection material for filed of the army by impact of fragment from the explosion of 155mm artillery shell to propose the improvement items. And it was evaluated the protection materials for structural boby such as corrugated steel plate, concrete block, prevention paint of explosion, aluminum foam and concrete T-wall by impact of fragment of 155mm artillery shells and explosion-induced pressure of C-4 explosive. As a result, protective performance of the existing protective material was superior but reinforcement is necessary for secondary damage because sand is leaking. The protective performance of new protective materials was greater than existing protective materials. And it can be used for protective materials.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.5
• /
• pp.1044-1051
• /
• 1989

A numerical calculation is carried out for the analysis of 3-dimensional compressible flow field in axial-flow rotating blades by using finite element method. The calculation of flow in impellers plays a dominant role in the theoretical research and design of turbomachines. Three-dimensional flow fields can be obtained by the quasi-three-dimensional iterative calculation of the flows both on blade-to-blade stream surfaces and hub-to-shroud stream surfaces with the introduction of viscous loss model in order to consider a loss due to viscosity of fluid. In devising the loss model, four primary sources of losses were identified: (1) blade profile loss (2) end wall loss (3) secondary flow loss (4) tip-leakage loss. For the consideration of an axially parabolic distribution of loss, the results of present calcullation are well agreed with the results by experiment, thus the introduction of loss model is proved to be valid.

• Journal of Rhinology
• /
• v.25 no.2
• /
• pp.114-117
• /
• 2018

Postoperative maxillary cyst (POMC) is relatively common complication among patients who underwent Caldwell-Luc surgery. Patients with POMC usually have no symptoms, although cyst extension can result in bone destruction or cystic infection with pain. The trigeminal nerve consists of the ophthalmic nerve, maxillary nerve, and mandibular nerve. Among these branches, the maxillary nerve runs to the lateral and frontal sides of the maxillary sinus wall. POMC can rarely lead to trigeminal neuropathy caused by cyst enlargement that compresses some branches of the trigeminal nerve. Recently, we experienced a case with trigeminal neuralgia due to POMC. The patient was successfully treated with inferior meatal antrostomy. We report this rare case with a literature review.

• Journal of the Korean Society of Visualization
• /
• v.18 no.3
• /
• pp.42-51
• /
• 2020

This study performs a numerical simulation of lid driven rectangular cavity flow with different aspect ratios of k = 0.5 to 4 under Reynolds 100, 1,000, 10,000 by using multi-relaxation time (MRT) Lattice Boltzmann Method (LBM). In order to achieve better convergence, well-posed boundary conditions in the domain should be defined such as no-slip condition on side and bottom solid wall surfaces and uniform horizontal velocity on the top of the cavity. This study focuses on the flow inside different shape of rectangular cavity with the aim to observe the effect of the Reynolds number and aspect ratio on the flow characteristics and primary/secondary vortex formation. In order to validate the study, the results have been compared with existing works. The result shows that the Reynolds number and the aspect ratio both has substantial effects on the flow inside the lid-driven rectangular cavity.

• Tuberculosis and Respiratory Diseases
• /
• v.61 no.3
• /
• pp.265-272
• /
• 2006

Background: Chest wall deformities such as kyphoscoliosis, thoracoplasty, and fibrothorax cause ventilatory insufficiency that can lead to chronic respiratory failure, with recurrent fatal acute respiratory failure(ARF). This study evaluated the frequency and outcome of ARF, the physiologic status, and the long-term prognosis of these patients. Methods: Twenty-nine patients with chest wall disorders, who experienced the first requirement of ventilatory support from ARF were examined. The mortality and recurrence rate of ARF, the pulmonary functions with arterial blood gas analysis, the efficacy of home oxygen therapy, and the long-term survival rate were investigated. Results: 1) The mortality of the first ARF was 24.1%. ARF recurred more than once in 72.7% of the remaining 22 patients, and overall rate of successful weaning was 73.2%. 2) Twenty-two patients who recovered from the first ARF showed a restrictive ventilatory impairment with a mean FVC and TLC of 37.2% and 62.4 % of predicted value, respectively, and a mean $PaCO_{2}$ of 57mmHg. Among the parameters of pulmonaty functions. the FVC(p=0.01) and VC(p=0.02) showed a significant correlation with the $PaCO_{2}$ level. 3) There were no significant differences between the patients treated with conservative medical treatment only and those with additional home oxygen therapy due to significant hypoxemia in the patients with recurrent ARF and the mortality. 4) The 1, 3, 5-year survival rates were 75%, 66%, and 57%, respectively, in the 20 patients who had recovered from the first ARF, excluding the two patients managed by non-invasive nocturnal ventilatory support. Conclusion: These results suggest that active ventilatory support should be provided to patients with ARF and chest wall disorders. However, considering recurrent ARF and weak effect of home oxygen therapy, non-invasive domiciliary ventilation is recommended in those patients with these conditions to achieve a better long-term prognosis.

• Economic and Environmental Geology
• /
• v.37 no.1
• /
• pp.1-19
• /
• 2004

Metallic deposits in Korea have a variety of genetic types such as hydrothermal veins, skarns, hydrothermal replacement and alaskite deposits and so on. Geological, mineralogical and geochemical features including host rock, wall-rock alteration, ore and gangue mineralogy, mineral texture and secondary mineralogy related to weathering process control the environmental signatures of mining areas. The environmental signatures of metallic deposits closed from early 1970s to late 1990s in Korea show complicate geochemistry and mineralogy due to step weathering of primary and secondary minerals such as oxidation-precipitation-remobilization. The potentiality of low pH and high heavy metal Concentration s from acid mine drainage is great in base-metal deposits associated with polymetallic mineralization, breccia-pipe type and Cretaceous hydrothermal Au veins with the amount of pyrite whereas skam, hydrothermal replacement, hydrothermal Cu and Au-Ag vein deposits are in low contamination possibility. The geoenvironmental models reflecting the various geologic features closely relate to disuibution of sulfides and carbonates and their ratios and finally effect on characteristics of environmental signatures such as heavy metal species and their concentrations in acid mine drainage.

• 한국문화재보존과학회:학술대회논문집
• /
• 2001.11a
• /
• pp.27-34
• /
• 2001

Following the recommendations made by the cultural authorities the wooden cultural properties (WCP) had been treated with fire-retardants for fire protection. However, visual inspections of some of the WCPs treated with fire-retardants showed microbial decay. The work was extended to examine the micromorphological characteristics of the WCPs in a Buddhist temple which had been treated with fire-retardant. Microscopic examination showed the presence of typical soft rot cavities along the length of microfibrils in the secondary wall. Bacterial attack was also observed by scanning and transmission electron microscopy. It is interesting that the decay patterns observed in the Buddhist temple were very similar to those observed in the waterlogged woods. Presumably chemicals in the fire-retardants used rendered the wood susceptible to attack by soft-rot and bacterial decay by causing an increase in the moisture content of wood. Further studies are needed to investigate the effect of fire-retardants used currently on the hygroscopicity and the strength of wood materials in the WCPs. Microbial attacks caused degradation of the secondary cell walls and in some cases also of the middle lamella. In addition, the cell walls in the outer parts of wood were also degraded due to weathering, and cell separation occurred from total disintegration of the middle lamella.

• The Korean Journal of Malacology
• /
• v.19 no.1
• /
• pp.71-79
• /
• 2003

After the juvenile octopus individuals being discharged, it is hard to separately capture them because they attach strongly to the wall of the aquarium by the suckers on the arms. Therefore, anaesthetics (MS-222 or lidocaine-HCl) are usually used for capture from attachment. The anaesthetized time of the octopus by lidocaine-HCl was more faster 1.6 to 4.5 times under 200 ppm and 6.0 to 6.5 times in 300 to 500 ppm than those in MS-222. In the anaesthetized and recovery rates (%) by the exposed time, the juvenile octopuses were anesthetized by lower concentrations of lidocaine-HCl within the short time, and rapidly recovered from anesthesia. In the secondary anesthesia of the juvenile octopuses exposed with lidocaine-HCl by the elapsed time after the primary anesthesia, the anesthetized time was later in case of lower concentrations and long elapsed times, However, the anesthetized time was faster when their concentrations were higher and the elapsed time after anesthesia were shorter. Recovery from the secondary anesthesia was faster when the elapsed time was long in lower concentration, and was later when the elapsed time was shorter. In case of Octopus ocellatus, anaesthetic effects by lidocaine-HCl concentrations were better than those of MS-222. Doses of lidocaine-HCl and critical time for works at the indoor laboratory were proper in concentration of 100 ppm within 15 min.

• Korean Journal of Veterinary Research
• /
• v.35 no.2
• /
• pp.217-228
• /
• 1995

The study was designed to investigate the effects of progesterone on the reproductive system. This investigation was performed by immunohistochemical methods using anti-bromodeoxyuridine-antibody following bromodeoxyuridine(Brdur) injection for labeling proliferating cells in the uterus and ovary of rats. Sixteen female rats(Wistar), weighing initially 300g, were randomly allotted into ovariectomized and unovariectomized large groups. These two large groups were subdivided into three subgroups of control, 3-day and 6-day groups, respectively. 3-days and 6-days group were injected with 1mg of progesterone/rat/day for 3 or 6 days, respectively. In gross findings, the uterus of ovariectomized groups markedly atrophied, and were not hypertrophied by progesterone injection for 3 days or 6 days and the uterus of unovariectomized groups also were not hypertrophied. Labeling index(LI, %) was measured by counting the number of Brdur-positive cells from 300 to 3,000 cells per layer in the uterus tissue. The average LI of the uterus in unovariectomized groups was higher than that of ovariectomized groups. The subgroups with higher LI in unovariectomized groups were ordered as 6-day group, 3-day group. So progesterone considerably effected to the proliferating of the cells in the uterus of unovariectomized groups. The layers with higher LI in the uterus wall were ordered as the functional zone of endometrium, epithelial layer of endometrium, basal zone of endometrium, myometrium and perimetrium. The cell types with higher LI in the uterus of unovariectomized groups were ordered as the surface epithelial cells, stromal cells, glandular epithelial cells and muscle cells. Growing follicles with proliferating cells from secondary and tertiary follicles in the ovary of unovariectomized groups appeared to be 37.66% in control group, 39.23% in 3-day groups, 39.47% in 6-day groups. Mature follicles in the ovary were more number in control group than those in 3-day groups but not appeared in 6-day groups. So progesterone not nearly effects to the number of the growing follicles but appeared to be related to suppression of the development and protrusion of the mid-tertiary and mature follicles on the ovary surface. The cell types with higher LI in the ovary of unovariectomized groups were respectively ordered as granulosa cells, theca interns cells in secondary follicles; theca interna cells, granulosa cells, theca externa cells in tertiary follicles; fibroblasts, theca in terns cells in atretic follicles; fibroblasts, luteal cells in corpus luteum.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.9
• /
• pp.69-76
• /
• 2018

The present study analyzed the effect of film hole position of 45 degree ribbed cooling channel on film cooling performance of gas turbine blades. We also investigated the influence of the ribs under the fixed blowing ratio. Three-dimensional numerical model was constructed and extensive simulation was conducted using the commercial code (Fluent ver. 17.0) under steady-state condition. Base on the simulation results, We investigated the cooling effectiveness, flow velocity, streamline, and pressure coefficient. Moreover, We analyzed the effect of cooling hole position on ejection of the secondary flow caused by the rib structure. From the results, It was found that internal flow of the cooling channel forms a vortex pair in the counterclockwise from the top side, and clockwise from the bottom side. For the channels with ribs, the vortex flow generated by the ribs caused a higher pressure difference near the hole outlet, resulting in at least 12% higher cooling effectiveness than the channel without ribs. Additionally, when the hole is located on the left side of the ribbed channel (Rib-Left), it can be found that the secondary flow generated by the ribs hits against wall surface near the hole to form a flow in the direction of the hole inclination angle. Therefore, It is considered that the region where the cooling gas discharged to the blade surface stays in the main flow boundary layer is wider than the other cases. In this case, The largest pressure coefficient difference was observed near the outlet of the hole, and as a result, the discharge of the cooling gas was accelerated and the cooling efficiency was slightly increased.