• 한국정밀공학회지
• /
• 제26권7호
• /
• pp.51-57
• /
• 2009

In this paper, we studied on an attenuation effect of automobile exhaust noise according to the direction of canceling speaker in duct-acoustic ANC system. Automobile exhaust noise was recorded at 800rpm, 3500rpm and 5000rpm of a diesel engine. Directions of canceling speaker can be set to $30^{\circ}$, $90^{\circ}$ and $150^{\circ}$ against the primary noise flow by acrylic ducts to be made for the experimentation. DSP board used to control the ANC system. The algorithm of this ANC system applied the Filtered-x-LMS algorithm that is modified to compensate for a property of DSP input signal and the secondary-path effect. As an experiment result, the direction of canceling speaker was proved to influence the reduction effect of noise. The $150^{\circ}$ duct in the attenuation effect of noise showed a better result than the $90^{\circ}$ or $30^{\circ}$ duct.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 추계학술대회 논문집
• /
• pp.35-36
• /
• 2007

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 1992년도 추계학술발표회논문집
• /
• pp.56-59
• /
• 1992

Adaptive active attenuation of noise in a duct is considered. A duct is modelled when the acoustic feedback exists. The secondary path transfer function is estimated using multiple model approaches. An IIR structure is assumed for the control filter, and the recursive least mean squares algorithm is used to adjust the filter coefficients.

• 제어로봇시스템학회논문지
• /
• 제13권6호
• /
• pp.547-554
• /
• 2007

This thesis presents a kind of active noise control(ANC) algorithm for reducing noise due to engine inside a car. The proposed control algorithm is, by using WP(Wavelet Packet), a one improving the instability due to delay of noise transmission and the lack of response ability for the rapid change of noise, which are defects of the existing FXLMS(Filtered-X Least Mean Square) algorithm. The chief character of this system is a thing that faster operation than the FXLMS is implemented by inserting WP in the secondary path. In other words, WP implements parallel operation. Then, the weights of filter in the adaptive algorithm will be updated faster. In addition, because WP have so excellent a resolution, they can process very minute noise. The efficiency of this control algorithm will be demonstrated in the matlab simulation and in the actual experiments by using a Labview program and a car.

• Journal of Power Electronics
• /
• 제19권1호
• /
• pp.296-306
• /
• 2019

The flyback topology is being widely used in power adapters. The coupling capacitance between primary and secondary windings of a flyback transformer is the main path for common-mode (CM) noise conduction. A Y-cap is usually used to effectively suppress EMI noise. However, this results in problems in space, cost, and the danger of safety leakage current. In this paper, the CM noise behaviors due to the electric field coupling of the transformer windings in a flyback adapter with synchronous rectification are analyzed. Then a scheme with balance winding is proposed to reduce the CM noise with a transformer winding design that eliminates the Y-cap. The planar transformer has advantages in terms of its low profile, good heat dissipation and good stray parameter consistency. Based on the proposed scheme, with the help of a full-wave simulation tool, the key parameter influences of the transformer PCB winding design on CM noise are further analyzed. Finally, a PCB transformer for an 18W adapter is designed and tested to verify the effectiveness of the balance winding scheme.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.2007-2008
• /
• 2011

In this paper, we implemented active noise control systems for active barriers with attenuation of road noise. And then we constructed by multi-channel audio systems and DAQ part, high performance DSP H/W. Active noise control firmware program was implemented for multi-channel off-line/on-line estimation methods for secondary path transfer functions and FIR/IIR filter structure main noise control algorithms. To evaluate performance of implemented systems, active barriers test bed was implemented and several experiments was performed by various noise cases.

• 전기학회논문지
• /
• 제61권1호
• /
• pp.179-185
• /
• 2012

Since the eco-era is getting closer, the importance of noise reducing in the passenger cars of high-speed train is very important. The active noise control is best choice to reduce low frequency noise because the passive one is too heavy for high speed trains where weight is so critical. Also ANC is able to reduce the ambient noise when the environmental-factor changes. To reduce a three-dimensional closed-space sound field like a car of a high-speed rail is hard to do using single channel ANC control system. We used multi-channel FXLMS algorithm which calculation speed is fast and the secondary path estimation is possible in order to take into account the physical delay in electro acoustic hardware control loudspeaker and power amplifier. Firstly, we have measured interior noise of KTX and estimated noise path in KTX test-bed. However there was some problem related to algorithm divergence and increasing the filter order. We have made a simulation of interior environment of KTX car by using three frequency bands of 120Hz, 280Hz, 360Hz as the most important for KTX ANC system. During this research the interior noise reduction of KTX car was made by using the multi-channel FXLMS algorithm. Reduction performance was evaluated and compared each other for open space section and tunnel section. in-situ experiment for the KTX noise reduction by proposed ANC was performed based on data obtained in simulation and they were compared for open space section and tunnel section as well.

• 산업기술연구
• /
• 제18권
• /
• pp.317-322
• /
• 1998

The purpose of this present experiments was to simulate the Active noise control system using MATLAB Tool kit. The Least-Mean-Square algorithm is the most applicable one to optimize the ANC systems, even it has tight limitation. This paper shows the influence of choosing step size to the performance of the LMS adaptive filters. In addition to the simulation, this paper describes the method to design the filtered LMS algorithm to get the better performance in Active noise control. It contains the secondary-path modeling to realize the real Active noise control system in the requesting fields.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제49권8호
• /
• pp.442-450
• /
• 2000

Active noise control is an approach to noise reduction in which a secondary noise source that destructively interferes with the unwanted noise. In general, active noise control systems rely on multiple sensors to measure the unwanted noise field and the effect of the cancellation. This paper develops an approach that utilizes a single sensor. The noise field is modeled as a stochastic process, and a time-adaptive algorithm is used to adaptively estimate the parameters of the process. Based on these parameter estimates, a canceling signal is generated. Opppenheim model assumed that transfer function characteristics from the canceling source to the error sensor is only propagation delay. But this paper proposes a modified Oppenheim model by considering transfer characteristics of acoustic device and noise path. This transfer characteristics is adaptively cancelled by adaptive model. This is proved by computer simulation with artifically generated random noise and sine wave noise. The details of the proposed architecture, and theoretical simulation and experimental results of the noise cancellation system for three dimension enclosure are presented in the paper.

• 대한기계학회논문집A
• /
• 제21권8호
• /
• pp.1332-1338
• /
• 1997

In the case of the transfer function for the secondary path is dependent on time, the on-line method which can model it is continuously must be applied to the active noise control technique. And the adaptive random noise technique among the on-line methods is effective in the narrow-band control. In this method, the signal to noise ratio between random noise for modeling and primary noise is low. Therefore, the estimations of transfer function will be prone to inaccuracies and the convergence time will be too long. Such imperfections will have an influence upon the performance of an active noise controller. In this study, t enhance the signal to noise ratio, the on-line method that is combined the conventional adaptive random noise technique and the adaptive line enhancer, is proposed. By using proposed on-line method, a rigorous system identification and control of primary noise have been implemented.