• International Journal of Naval Architecture and Ocean Engineering
• /
• 제10권4호
• /
• pp.439-449
• /
• 2018

In this paper, multi-objective optimization of a multi-bubble pressure cabin in the underwater glider with Blended-Wing-Body (BWB) is carried out using Kriging and the Non-dominated Sorting Genetic Algorithm (NSGA-II). Two objective functions are considered: buoyancy-weight ratio and internal volume. Multi-bubble pressure cabin has a strong compressive capacity, and makes full use of the fuselage space. Parametric modeling of the multi-bubble pressure cabin structure is automatic generated using UG secondary development. Finite Element Analysis (FEA) is employed to study the structural performance using the commercial software ANSYS. The weight of the primary structure is determined from the volume of the Finite Element Structure (FES). The stress limit is taken into account as the constraint condition. Finally, Technique for Ordering Preferences by Similarity to Ideal Solution (TOPSIS) method is used to find some trade-off optimum design points from all non-dominated optimum design points represented by the Pareto fronts. The best solution is compared with the initial design results to prove the efficiency and applicability of this optimization method.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권11호
• /
• pp.4331-4354
• /
• 2020

Nepal is a sensitive and disaster-prone country where safety and security risk are of high concern for travelers. Digital technologies can play a vital role in addressing safety and security issues in the country. This research work proposes a Digital tourism security system design for addressing the safety and security issues in tourism industry of Nepal. The study uses Design science research methodology to identify artifacts, interactions, information flow and dependencies between them which are then mapped with existing prevalent technology to provide design solutions. Data is obtained from interview of tourist and experts as a primary source and technical documents/draft, software documentations, surveys as secondary source. Generalized information model, Use cases model, Network architecture model, Layered taxonomy model and Digital tourism technology reference model are the outcomes of the study. The work is very important as it talks specifically about implementation and integration of digital technologies in tourism security governance at federal, provincial, municipal and rural level. The research supplements as a knowledge document for design and implementation of digital tourism security system in practice. As there is very less work on digital systems in tourism security of Nepal, this work is a pioneer and first of its kind.

• International Journal of Costume and Fashion
• /
• 제15권2호
• /
• pp.1-17
• /
• 2015

This paper examines the contemporary relationship between fashion brands and celebrities. Noting the historic role of celebrities in fashion and their current prevalence in the industry, the paper moves beyond discussion of the motives and effectiveness of celebrity endorsement, and instead explores its nature and practice in the fashion sector. The paper proposes a new definition of celebrity endorsement in fashion, offers a classification of celebrities involved in fashion brand endorsement, and presents a typology examining the contemporary means by which a fashion brand may collaborate with celebrities. The typology is defined in context of the nature, length and cost to the brand of the relationship between it and the celebrity. The methodology uses secondary sources and qualitative primary research in an exploratory agenda in order to propose conclusions and suggest ideas for further research.

• 한국환경복원기술학회지
• /
• 제24권2호
• /
• pp.85-102
• /
• 2021

Phytosociological characteristics on Quercus acutissima forests distribution in Daechong-dam basin survey has been carried out using Z.-M. School's methodology and numerical-classification analyses. A total of 43 phytosociological relevés were sampled. Syntaxa were described as Oplismenus undulatifolius-Quercus acutissima community(typicum subcommunity, Phryma leptostachya var. asiatica subcommunity, Ulmus davidiana var. japonica subcommunity), Quercus acutissima community and Quercus variabilis-Quercus acutissima community (typicum subcommunity, Castanea crenata subcommunity). The above three plant communities were classified with species composition reflecting local environmental characteristics of mountain topographies, inclination degrees, and rock exposure rates. Conclusively, those communities were recognized as secondary vegetation affected by high intensity and frequency of human impacts as they inhabited in southward hill lands and low lying grounds in mountains adjacent to human settlements and arable lands. Quercus acutissima community was classified as rural type syntax based on their inlandward distribution and species composition differences from urban forests. Afforest process and natural succession were discussed in relation with habitat environmental elements of Quercus acutissima forest in the survey area.

• 설비공학논문집
• /
• 제29권5호
• /
• pp.249-258
• /
• 2017

This paper provides an economic analysis of a new geothermal heat pump system that reuses condenser waste heat from a Ground Source Heat Pump ($GSHP_{ch}$) to provide energy for a hot water Ground Source heat pump ($GSHP_{hw}$). After conducting feasibility tests using GLD and TRNSYS simulations, the proposed system was effectively installed and thoroughly tested. We observe that 1) the Coefficient of Performance (COP) of the $GSHP_{hw}$ and the $GSHP_{ch}$ during cooling mode improves by up to 62% and 7%, respectively; 2) the number of bore holes can be reduced by two; and 3) the hot water supply temperature of the $GSHP_{hw}$ increases by up to $60^{\circ}C$. We further conclude that 1) the reduction of two bore holes can save approximately ten million Won from the initial cost investment; and 2) the increased COP of the $GSHP_{hw}$ can save approximately one million Won in annual electricity costs.

• Geomechanics and Engineering
• /
• 제24권3호
• /
• pp.253-266
• /
• 2021

The sufficient early strength of primary support is crucial for stabilizing the surroundings, especially for the tunnels constructed in soil. This paper introduces the Steel-Concrete Composite Support System (SCCS), a new support with high bearing capacity and flexible, rapid construction. The bearing characteristics and construction performance of SCCS were systematically studied using a three-dimensional numerical model. A sensitivity analysis was also performed. It was found that the stress of a π-shaped steel arch decreased with an increase in the thickness of the wall, and increased linearly with an increase in the rate of stress release. In the horizontal direction of the arch section, the nodal stresses of the crown and the shoulder gradually increased in longitudinally, and in the vertical direction, the nodal stresses gradually decreased from top to bottom. The stress distribution at the waist, however, was opposite to that at the crown and the shoulder. By analyzing the stress of the arch section under different installation gaps, the sectional stress evolution was found to have a step-growth trend at the crown and shoulder. The stress evolution at the waist is more likely to have a two-stage growth trend: a slow growth stage and a fast growth stage. The maximum tensile and compressive stresses of the secondary lining supported by SCCS were reduced on average by 38.0% and 49.0%, respectively, compared with the traditional support. The findings can provide a reference for the supporting technology in tunnels driven in loess.

• 콘크리트학회논문집
• /
• 제26권2호
• /
• pp.117-124
• /
• 2014

온실가스 배출로 인한 환경 문제가 전 세계적으로 대두되고 있으며 시멘트 산업의 $CO_2$ 배출 비중은 매우 큰 실정이고 앞으로도 시멘트의 지속적인 수요가 필요하다. 이 연구에서는 시멘트 생산에 의한 $CO_2$ 배출과 환경 부하를 감소시키기 위해 산업부산물인 고로슬래그를 활용하여 소성을 거치지 않은 알칼리활성 시멘트의 개발을 위한 기초 물성 실험을 실시하였다. 2차 제품으로의 활용 등 양생에 따른 특성을 비교하기 위하여 상압 증기 양생 등 양생 조건을 다르게 하여 실험을 진행하였다. 모르타르 경화체를 통한 휨 압축강도 측정으로 역학적 특성을 파악하고 내산성 내염화물 침투성 등 화학적 특성을 파악하였으며 XRD, SEM 실험을 통해 수화 반응 메커니즘을 분석하였다. 이 실험 결과로부터 보통 포틀랜드 시멘트와 비교하여 우수한 역학적 화학적 특성을 확인하였고, 뛰어난 내구성을 요구하는 지하구조물이나 수중 및 해중 구조물에 적용이 가능할 것으로 예상된다. 증기 양생을 통한 우수한 장기강도를 바탕으로 콘크리트 2차 제품에 시멘트 대체제로 활용이 가능할 것으로 예상되며 지속적인 연구를 통해 문제점을 해결하여 우수한 경제성 및 환경부하를 줄일 수 있는 효과가 기대된다.

• 상하수도학회지
• /
• 제32권1호
• /
• pp.47-53
• /
• 2018

This study investigated phosphorus removal from secondary treated effluent using coagulation-membrane separation hybrid treatment to satisfy strict regulation in wastewater treatment. The membrane separation process was used to remove suspended phosphorus particles after coagulation/settlement. Membrane separation with $0.2{\mu}m$ pore size of micro filtration membrane could reduce phosphorus concentration to 0.02 mg P/L after coagulation with 1 mg Al/L dose of polyaluminum chloride (PACl). Regardless of coagulant, the residual concentration of phosphorus decreased as the dose increased from 1.5 to 3.5 mg Al/L, while the target concentration of 0.05 mg P/L or less was achieved at 2.5 mg Al/L for the aluminum sulfate (Alum) and 3.5 mg Al/L for PACl. Moreover, alum showed better membrane flux as make bigger particles than PACl. Alum showed a 40% of flux decrease at 2.5 mg Al/L dose, while PACl indicated a 50% decrease of membrane flux even with a higher dose of 3.5 mg Al/L. Thus, alum was more effective coagulant than PACl considering phosphorus removal and membrane flux as well as its dose. Consequently, the coagulation-membrane separation hybrid treatment could be mitigate regulation on phosphorus removal as unsettleable phosphorus particles were effectively removed by membrane after coagulation.

• 한국가구학회지
• /
• 제19권5호
• /
• pp.328-340
• /
• 2008

This study examined the characteristics of furniture design in the early Modernism that occurred in the early 20th Century through the relationship with modern arts. The furniture design of the early Modernism was established in the early 20th Century based on the simplicity and honesty of the Art and Crafts Movement and Anti-Historicism in Art Nouveau. During this period, the necessity of mass production became critical due to the radical industrialization and new social demands. In such periodic stream, the furniture design of the early modernism pursued simplicity and geometric beauty based on functionalism. The efforts to discover the fundamental structure of furniture were intensified. It was not limited to furniture design but was also exercised in the huge periodic transformation that progressed in every field of art including architecture. The Modernism art has also been connected to Cubism and spread into an abstract direction. While questioning the potential essence and progressing the study on genuine characteristics, the Modernism art tried to return things into their substantial looks and reorganize them conceptually, rather than reproducing external objects. The furniture that was secondary to a part of architecture and interior accessory transcended its decorative purpose. It pursued the structure to follow its fundamental purpose as furniture. Such tendency corresponded to the direction that Post-Modernism followed. Likewise, both art and design had the revivable and abstract characteristics based on the identical objective in ideology. For this reason, the formative and geometric characteristics of the early modernism furniture design have a mutual relationship with modern arts. Particularly, such tendency intensified and progressed through the Bauhaus in Germany. Based on such facts, this study proved that the early Modernism furniture design in the 20th Century tended to appear in common arts including the art and design according to the social demand of the huge periodic stream. Furthermore, the ideology that was adopted in art and design, as well as its formative characteristics, was examined through the mutual relationship of modern arts and design.

• 농촌계획
• /
• 제22권1호
• /
• pp.25-35
• /
• 2016

This study targets Korean culture theme park in Yeongju-Zone and World confucian scholar culture park in Bonghwa-Zone among the Three Major Cultural Areas Projects supervised by Ministry of Culture, Sports and Tourism. The study analyzes the Historical and Cultural Authenticity of each project on the basis of the reports and the report materials for meeting with related organizations. The results of the study are drawn as follows. First, through the theoretical consideration, this study drew the types of authenticity: originality, identity, specificity and visibility, which are evaluation items on the Historical and Cultural Authenticity. Second, Bonghwa-Zone succeeded in acquiring originality with tangible cultural properties but Yeongju-Zone chose a project site without it. Third, with originality, Bonghwa-zone was evaluated as having resources and concept with high traditional culture connectivity and fulfilled identity. It led the feature showing the high affinity between originality and identity. Fourth, compared to the projects of Andong-Zone in the Three Major Cultural Areas Projects, these two projects failed to acquire the distinctions since the primary and the secondary influence area and major facilities & programs coincided with those of the projects of Andong-Zone. Fifth, compared to Bonghwa-Zone, Yeongju-Zone realized visibility faithfully by the conceptual flexibility of "Korean Culture" and a large-scale development. Sixth, in terms of the Historical and Cultural Authenticity of project plan, it is evaluated that Yeongju-Zone and Bonghwa-Zone only fulfilled visibility and specificity respectively.