• Journal of the Korean Ceramic Society
• /
• v.34 no.7
• /
• pp.738-746
• /
• 1997

MgO clinker and two kinds of dolomite clinkers with different microstructures and CaO contents were used as starting materials, and the effects of Fe2O3 addition on the properties of MgO and dolomite were investigated in the range of 2 to 8 wt% of Fe2O3 content. Secondary phases contributed to densification of MgO-Fe2O3 and dolomite-Fe2O3 were magnesioferrite and dicalciumferrite, respectively. Sinterabilities of MgO-Fe2O3 and dolomite-Fe2O3 were directly proportional to the amount of secondary phases. Also, sinterability of dolomite itself was dependent on the microstructure of starting material including distribution of CaO and MgO as well as the addition amount of Fe2O3. The flexural strength of MgO-Fe2O3 content was almost constant. The hydration resistance of dolomite with large size of MgO and discontinuous distribution of CaO was higher than that of dolomite with small size of MgO and continuous distribution of CaO. Also, the minimum content of Fe2O3 to prevent they hydration of dolomite was about 4wt%. As increasing Fe2O3 content, the penetration resistance of MgO-Fe2O3 was improved by the increment of magnesioferrite. On the other hand, the penetration resistance of dolomite-Fe2O3 was decreased because of the increment of dicalciumferrite having low melting point.

• Transactions on Electrical and Electronic Materials
• /
• v.8 no.5
• /
• pp.222-225
• /
• 2007

In this paper, we compared the current limiting characteristics of both the hybrid type and the flux-lock type superconducting fault current limiters(SFCLs), which have a magnetic coupling structure between a primary winding and several secondary windings. The limiting impedances of two SFCLs were derived from each equivalent circuit considering the design parameters of SFCL such as the self-inductance of secondary winding and the resistance of $high-T_C$ superconducting(HTSC) element. Through the comparison for the limiting impedances of two SFCLs considering the dependence of the HTSC element's resistance on the applying voltage into the SFCL, the hybrid type SFCL was confirmed to have larger limiting impedance with smaller resistance of HTSC element than the flux-lock type SFCL. It was expected from the analysis that the hybrid type SFCL was more advantageous than the flux-lock type SFCL from the viewpoint of the fault current limiting level.

• Proceedings of the KWS Conference
• /
• 1990.11a
• /
• pp.82-86
• /
• 1990

A new method was investigated to measure the high current in resistance welding processes. A measuring unit was developed by using a strain gage attached on the outer surface of a steel ring. The steel ring was placed around a section of the secondary loop of the welding machine, and was deformed by electro-magnetic forces induced by the high welding current. The circumferential constituent of the ring deformation was then used to obtain a signal voltage proportional to the secondary welding current. The strain gage signal of ring deformation is enough to determine the welding current in resistance spot welding, especially when welded with direct current.

• 전기의세계
• /
• v.29 no.6
• /
• pp.401-409
• /
• 1980

This paper deals with the implementation of forced reclosing the transmission line. Because the ground circuit breaker method decrease the secondary arc current sufficiently, the reclosing time can be reduced. As the secondary arc current is large and its residual time is long in UHV transmission line, this method is more effective in that system. The resistance of ground circuit breaker which minimize the secondary arc current is determined according to the system voltage and the length of transmission line.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.5
• /
• pp.761-766
• /
• 2008

This paper describes a compensation algorithm for a measurement voltage transformer (VT) based on the hysteresis characteristics of the core. The error of the VT is caused by the voltages across the primary and secondary windings. The latter depends on the secondary current whilst the former depends on the primary current, i.e. the sum of the exciting current and the secondary current. The proposed algorithm calculates the voltages across the primary and secondary windings and add them to the measured secondary voltage for compensation. To do this, the primary and secondary currents should be estimated. The secondary current is obtained directly from the secondary voltage and used to calculate the voltage across the secondary winding. For the primary current, in this paper, the exciting current is decomposed into the two currents, i.e. the core-loss current and the magnetizing current. The core-loss current is obtained by dividing the primary induced voltage by the core-loss resistance. The magnetizing current is obtained by inserting the flux into the flux-magnetizing current curve. The calculated voltages across the primary and secondary windings are added to the measured secondary current for compensation. The proposed compensation algorithm improves the error of the VT significantly.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.37 no.1
• /
• pp.57-65
• /
• 2001

The speed control without a speed sensor is expected strongly to progress reliability, simplicity and cost performance of Induction Motor(I.M) systems. Also, it contributes to expansion of I.M systems into various industrial application fields. This paper investigates a novel speed sensorless control method of I.M considering the secondary resistance identification based on the transientless torque control technique. Especially, this paper aimed at the identification of the secondary resistance simultaneously with speed estimation superposing of sinusoidal flux wave to a constant flux value. Furthermore, the secondary flux with some frequency is controlled independently on torque control. The proposed speed estimation method is derived from a motor circuit equation theoretically and also it can be conducted easily by detecting primary motor currents and primary voltage commands at every sampling time. Some numerical simulations with the assumption of using a pulse width modulation(PWM) voltage source inverter are performed to verify the proposed method.

• Journal of Welding and Joining
• /
• v.17 no.2
• /
• pp.97-103
• /
• 1999

The dynamic resistance monitoring in primary circuit is one of the important issues. Because in-process and real time quality assurance of resistance spot weld is needed to increase the product reliability. In this study, new dynamic resistance detecting method is proposed as a practical manner of weld quality assurance using instantaneous current and voltage measured at the primary circuit. and also, various patterns of primary dynamic resistance curve are characterized with the macro photograph and the weldability lobe curve. It is found that the primary dynamic resistance patterns are basically similar to those of the secondary, but there is evident advantage such as no extra devices are needed to obtain the quality information and eventually real time feedback control will be possible.

• Journal of Educational Research in Mathematics
• /
• v.24 no.3
• /
• pp.387-407
• /
• 2014

This study investigeted secondary math teachers' difficulties of technology in geometry class with grounded theory by Strauss and Corbin. 178 secondary math teachers attending the professional development program on technology-based geometry teaching at eight locations in January 2014, participated in this study with informed consents. Data was collected with an open-ended questionnaire survey. In line with grounded theory, open, axial and selective coding were applied to data analysis. According to the results of this study, teachers were found to experience resistance in using technology due to new learning and changes, with knowledge and awareness of technology effectively interacting to lessen such resistance. In using technology, teachers were found to go through the 'access-resistance-unaccepted use-acceptance' stages. Teachers having difficulties in using technology included the following four types: 'inaccessible, denial of acceptance, discontinuation of use, and acceptance 'These findings suggest novel perspectives towards teachers having difficulties in using technology, providing implications for teachers' professional development.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.742-747
• /
• 2006

This paper describes online stator-resistance estimation of a linear induction motor(LIM) with cage-type secondary using direct thrust control(DTC), where the resistance value is derived from stator-winding temperature estimation using thermocouple. In this paper, corrected stator resistance has an error in actuality measurement resistance. So compensation coefficient $\kappa$ which is decided through comparison and verifying several times relation of calculated resistance and measured motor line-line resistance. The stator-winding temperature information can also be used for monitoring, protection, and fault-tolerant control of the machine. Also, this paper reports the LIM's responses of the flux measured by the proposed stator resistance compensation algorithm.

• Korean Journal of Plant Resources
• /
• v.10 no.2
• /
• pp.128-134
• /
• 1997

This study was conducted to test on the resistance of varieties bred by crossing with Asominori to bacterial leaf blight. Nakdongbyeo and Dongjinbyeo which were susceptible to HB 9011, 8 resistant varieties including Ilmibyeo derived from Asominori and Asominori, Hwangok, 13 varieties including Chukoku 45 which were resistance to HB 9011, HB 9022 and HB 9033 were used to screen their res ponce depending on the various screening methods such as the true resistance, the secondary infection resistance and the disease common field test methods, and the results are as follows: Among 13 varieties tested, 11 varieties including llmibyeo showed tme resistance to HB 9011. Less than 1.0cm of disease lesion were developed on these varieties. Disease lesion was not developed on most of the Asominori lines including Daechongbyeo against IIB9011 and 1lmibyeo was also resistance to HB 9011, on this variety disease lesion area rate was 1.2%, and 7 varieties including Hwajinbyeo showed field resistance to HB 9022. Disease lesion area rate were 19.6% on Nakdongbyeo. 15.6% on Dongjinbyeo, from 3.0% to 2.4% on Asominori lines, and 0.5% on the Asominori when screened at disease common area. Disease was not developed on Keumnambyeo. Significant correlation coefficiences were found between the results from the test methods of the true resistance, the field resistance ancl the field resistance at disease common field tests on Asominori lines, but in some cases, even the varieties on which disease lesions developed, showed field resistance to HB 9022 and HB 9033.