• Journal of Power Electronics
• /
• v.16 no.1
• /
• pp.329-339
• /
• 2016

Owing to mismatched feeder impedances in an islanded microgrid, the conventional droop control method typically results in errors in reactive power sharing among distributed generation (DG) units. In this study, an improved droop control strategy based on secondary voltage control is proposed to enhance the reactive power sharing accuracy in an islanded microgrid. In a DG local controller, an integral term is introduced into the voltage droop function, in which the voltage compensation signal from the secondary voltage control is utilized as the common reactive power reference for each DG unit. Therefore, accurate reactive power sharing can be realized without any power information exchange among DG units or between DG units and the central controller. Meanwhile, the voltage deviation in the microgrid common bus is removed. Communication in the proposed strategy is simple to implement because the information of the voltage compensation signal is broadcasted from the central controller to each DG unit. The reactive power sharing accuracy is also not sensitive to time-delay mismatch in the communication channels. Simulation and experimental results are provided to validate the effectiveness of the proposed method.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1416-1418
• /
• 2005

This paper presents a new hybrid control method of asymmetrical half-bridge converter(AHBC) with low voltage stresses of the diodes and interleaved PFC(power factor correction). The proposed new control scheme can observe variation of secondary diodes voltage stresses by variation of duty ratio and then decide the control portions which are asymmetrical control and PFM(Pulse Frequency Modulation). Therefore, the proposed control scheme has many advantages such as a low rated voltage of the secondary diodes, low conduction loss according to the low voltage drop and wide zvs range by load variation. Through simulation results, the validity of the proposed control scheme is demonstrated.

• Communications for Statistical Applications and Methods
• /
• v.26 no.2
• /
• pp.103-129
• /
• 2019

The main goal of a case-control study is to learn the association between various risk factors and a primary outcome (e.g., disease status). Particularly recently, it is also quite common to perform secondary analyses of the case-control data in order to understand certain associations between the risk factors of the primary outcome. It has been repeatedly documented with case-control data, association studies of the risk factors that ignore the case-control sampling scheme can produce highly biased estimates of the population effects. In this article, we review the issues of the naive secondary analyses that do not account for the biased sampling scheme, and also the various methods that have been proposed to account for the case-control ascertainment. We additionally compare the results of many of the discussed methods in an example examining the association of a particular genetic variant with smoking behavior, where the data were obtained from a lung cancer case-control study.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.12
• /
• pp.827-833
• /
• 2004

In active noise control (ANC) systems, the error-reduction performance of the conventional Filtered-X Least Mean Square (FXLMS) algorithm may be affected by nonlinear distortions in the secondary path such as in the power amplifiers, loudspeakers and transducers. In this paper, a nonlinear FXLMS algorithm with high error-reduction performance is proposed to compensate for undesirable nonlinearities in the secondary-path of ANC systems by employing the inverse Volterra filtering approach. In particular, the proposed approach is based on the utilization of the conventional P-th order inverse approach to nonlinearity compensation in the secondary path of ANC systems. Finally, the simulation results showed that the proposed approach yields a better nonlinearity compensation performance for the ANC systems with a nonlinear secondary path than the conventional FXLMS.

• Proceedings of the IEEK Conference
• /
• 2001.06e
• /
• pp.103-106
• /
• 2001

In this paper, a soft switching half-bridge converter using secondary switches for output control and conduction loss reduction is proposed. The conventional half-bridge converter must be fixed on duty cycle for soft switching. The proposed converter was consisted of two added switches in series of the secondary rectifier diodes. The main switches with constant duty cycle are operated ZVS. The secondary switches are operated ZV-ZCS. Especially, the primary switches were fixed duty cycle for maximum voltage conversion ratio. Output of converter is controlled by duty cycle or phase-shifted time of secondary switches. The conduction loss of the proposed converter can be reduced by the secondary switches. The operation characteristic, analysis, simulation and experimental results of the proposed converter are presented.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.33-35
• /
• 2004

The secondary voltage control is the method the pilot bus controls the voltage of the voltage control area sufficiently uncoupled form its neighbours within a area to k slightly influenced by the actions carried out in the other areas. This paper presents the comparison of three methods which determines the voltage control area for the secondary voltage control in power system. Additionally, this paper selects the fitted thing of three methods determining the voltage control area, VSSA, and using it applies the procedure determining the voltage control area to KEPCO system.

• Journal of Power Electronics
• /
• v.16 no.4
• /
• pp.1375-1386
• /
• 2016

To decouple the secondary saliencies in sensorless permanent magnet synchronous machine (PMSM) drives, a repetitive control (RC) in the angle domain is proposed. In this paper, the inductance model of a concentrated windings surface-mounted PMSM (cwSPMSM) with strong secondary saliencies is developed. Due to the secondary saliencies, the estimated position contains harmonic disturbances that are periodic relative to the angular position. Through a transformation from the time domain to the angle domain, these varying frequency disturbances can be treated as constant periodic disturbances. The proposed angle-domain RC is plugged into an existing phase-locked loop (PLL) and utilizes the error of the PLL to generate signals to suppress these periodic disturbances. A stability analysis and parameter design guidelines of the RC are addressed in detail. Finally, the proposed method is carried out on a cwSPMSM drive test-bench. The effectiveness and accuracy are verified by experimental results.

• Journal of Korean Academy of Nursing
• /
• v.41 no.1
• /
• pp.47-60
• /
• 2011

Purpose: This study was conducted to develop an e-Learning program that assists nursing students' clinical Purpose: This study was conducted to develop and evaluate a web-based education program for secondary stroke prevention. Methods: A web-based secondary stroke prevention education program was developed using the system's life cycle methods and evaluated by comparing the effects of education among three groups, a web group, a booklet group and a control group. Results: Knowledge level of both patients and family, as well as some health behavior compliance in the web-based and booklet education groups were significantly higher than those of the control group. Family support in the web-based and booklet education groups was significantly higher than that of the control group after 12 weeks. The urine cotinine level in the web-based education group was significantly lower than that of the control group after 12 weeks. Medication adherence, blood pressure and perceived health status were not statistically different among the three groups at any time. Conclusion: Webbased and booklet education programs were equally effective regarding the level of knowledge of patients and their families, family support, health behavior compliance, and urine cotinine level. These results demonstrate the potential use of a webbased education program for secondary stroke prevention.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.7
• /
• pp.1248-1254
• /
• 2010

Authors conducted a deduction of some parameters using the magnetic equivalent circuit method and a verification study of the thrust force control algorithm of a rotary-typed small-scaled linear induction motor for a railway transit. In a LIM, it is possible to express the parameters of the magnetic equivalent circuit into a function of the shape of the secondary aluminium plate and the airgap between the LIM primary core and the secondary aluminium plate. It means that the LIM properties can be changed considerably by the shape of the secondary aluminium plate and the airgap between the LIM primary core and the secondary aluminium plate. So, authors analyzed a tendency of changes of the magnetic equivalent circuit parameters and the LIM characteristics by changing of the airgap of the secondary aluminium plate of a rotary-typed small-scaled LIM. And authors conducted a verification study of the indirect vector control algorithm with constant slip frequency by using the rotary-typed small-scaled LIM tester set on the basis of the calculated LIM parameters. Finally authors accomplished a research on applicability for LIM railway transit.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.3529-3533
• /
• 2007

The advantages of the SITVC(secondary injection thrust vector control) technique over mechanical thrust vector systems include a reduction in both the nozzle weight and complexity due to the elimination of the mechanical actuators that are used in conventional vectoring. Computational study is performed to understand the fluidic thrust vectoring control of an axisymmetric nozzle, in which secondary gas injection is made in the divergent section of the nozzle. The nozzle has a design mach number 3. The effect of injection hole number and shape of secondary jet on the mach number distribution of SITVC were investigated. The standard ${\kappa}$ - ${\epsilon}$ turbulence model solved the complex three-dimensional nozzle flows perturbed by the secondary gas jet. The numerical code was validated by experiment. The results showed that the mach number distribution of circular and square nozzle are similar each other. As number of second injection hole increasing, a effect of deflection was decreased.