• 상하수도학회지
• /
• 제27권5호
• /
• pp.561-570
• /
• 2013

There are two types of rectangular secondary clarifier at biological nutrient removal (BNR) facility to settle MLSS; conventional activated sludge secondary clarifier and Gould Type I clarifier. In this study, the performances of two types at respective biological nutrient removal facility are compared using weekly operational data. Surface Overflow Rate (SOR), Surface Loading Rate (SLR), Sludge Volume Index (SVI), secondary effluent SS concentration are studied. It has found that Gould Type I has 3.5 times less average secondary effluent SS concentration that is 2.4 mg/L than that of conventional activated sludge secondary clarifier. Both SOR and SLR have shown little effect on secondary effluent SS concentrations at Gould Type I clarifier in contrary that SOR affects the secondary effluent SS concentrations at conventional activated sludge rectangular secondary clarifier. From this study, it is recommended that Gould Type I must be considered for secondary clarifier when BNR plant is designed.

• 상하수도학회지
• /
• 제26권3호
• /
• pp.471-478
• /
• 2012

Where an activated sludge system needs to be converted to biological nutrient removal(BNR) system, the secondary clarifier must handle higher MLSS from bioreactor since nitrification in BNR system that requires higher SRTs than activated sludge system. Either increase the clarifier size or modification of clarifier physical structure is required to cope with MLSS surge. One of recommended structural modification is the insertion of Lamellar within clarifier. In this study, two clarifiers - one has Lamellar structure inserted and the other does not - were used to compare the effect of Lamellar in solid/liquid separation. Same MLSS was fed to both clarifiers and concentrations of MLSS were varied. With all MLSS concentrations, attachment of MLSS on Lamellar was observed and it was found that detached MLSS caused the higher effluent SS concentrations than that of non-Lamellar clarifier effluent. From these results, Lamellar should not be inserted in clarifier to handle MLSS from BNR processes and the recommendation must be withdrawn.

• 상하수도학회지
• /
• 제24권1호
• /
• pp.41-50
• /
• 2010

The influent and effluent baffle configurations seriously affect the hydraulic characteristics of the secondary clarifier in wastewater treatment plant. In this study, those baffle configurations were optimized by computational fluid dynamics(CFD) analysis and particle image velocity(PIV) test in order to obtain uniform flow in inlet region and to minimize upflow velocity in outlet region of the secondary clarifier. Theoretical analysis using CFD showed that more uniform flow could be accomplished when the influent baffle was located closely to the inlet opening. Effects of effluent baffle configuration on the upflow velocity in the outlet region of the secondary clarifier were analyzed with four types of effluent baffles which are widely adopted for secondary clarifier design. From the CFD analysis, McKinney baffle(EB-2) was estimated to be the most effective for restraining the upflow velocity in the outlet region and these trends were identified by PIV tests. In addition, the McKinney baffle showed the most uniform overflow velocity distribution around the weir.

• 상하수도학회지
• /
• 제28권1호
• /
• pp.73-81
• /
• 2014

One-dimensional flux theory (1DFT) is conventionally used for design of secondary clarifier of wastewater treatment plant. However, the 1DFT cannot describe turbulence, density current, shape parameters of the clarifier. In this study, we optimized the configurations of influent guide baffle and effluent baffle through the simulation using computational fluid dynamics (CFD) and its verification by particle image velocity (PIV) test. The energy dissipating inlet (EDI) without influent guide baffle ($0^{\circ}$) showed the best efficiency for minimizing downward velocity under the center well of the clarifier. The lowest velocity distribution around the effluent weir region could be obtained with the McKinney baffle (EB-2). The performances of the influent and effluent baffles were clearly verified by PIV test results.

• 상하수도학회지
• /
• 제24권2호
• /
• pp.219-230
• /
• 2010

Computer simulation has been widely used to design and optimize the operation of wastewater treatment plants since 1980. For secondary clarifiers, the simulation has been a tool to optimize the performance by providing dimensions for flocculation well. However, there has been no attempt to find the optimized geometrical parameters in circular secondary clarifier using simulation tools. In this study, three SVIs (Sludge Volume Indexes), two well types (feed and flocculation wells), 8 SWDs (Side Water Depths) and 9 bottom slopes were variables for simulation. Diurnal inflow and associated MLSS (Mixed Liquor Suspended Solid) concentrations were used for input loadings. When flocculation well was installed, 48% less concentration at lowest ESS (Effluent Suspended Solid) concentrations was produced and the diurnal ESS concentration range had been reduced by 52%. From these results, flocculation well must be installed to produce lower and stable ESS from circular secondary clarifiers. Under same loading conditions with $300m{\ell}$/g of SVI, The lowest ESS was produced when SWD was 4.5m with 4% of bottom slope. Therefore, SWD and bottom slope must not be deeper than 4.5m and must be near 4%, respectively, in circular clarifier with flocculation well to produce the lowest ESS concentration.

• 한국물환경학회지
• /
• 제26권5호
• /
• pp.871-879
• /
• 2010

To figure out the removal efficiency of indicator and pathogenic bacteria by unit processes of a sewage treatment plant using activated sludge process, analyses were done for incoming sewage, influent and effluent of primary clarifier, aeration tank, secondary clarifier and final discharge conduit of the plant. A matrix of bacterial items (average of bacterial reduction [log/ml], p value of paired t-test, number of decreased cases of twenty analyses, removal percentage only for decreased cases) between incoming sewage and final effluent of the plant were heterotrophic plate counts (1.54, 0.000, 20, 95.01), total coliforms (1.38, 0.000, 19, 83.94), fecal coliforms (0.90, 0.000, 20, 94.84), fecal streptococci (0.90, 0.000, 20, 98.08), presumptive Salmonella (0.23, 0.561, 7, 99.09), and presumptive Shigella (1.02, 0.002, 15, 92.98). Total coliforms, fecal coliforms, heterotrophic plate counts, and fecal streptococci showed highest decrease through secondary clarifier about 1-log (p<0.001) between 88% and 96%, and primary clarifier represented the significant (p<0.05) decrease. However, final effluent through discharge conduit showed higher total coliforms and fecal streptococci than effluent of secondary clarifier (p<0.05). In addition, final effluent once violated the water quality standard while effluent of secondary clarifier satisfied the standard. Hence some control measures including elimination of deposits in discharge conduit or disinfection of final effluent are necessary.

• 상하수도학회지
• /
• 제22권2호
• /
• pp.219-225
• /
• 2008

Evaluating and designing secondary clarifier require to define characteristics of influent MLSS (Mixed Liquor Suspended Solids). In this study, bioflocculation and settling characteristics for MLSS from a Biological Nutrient Removal (BNR) plant located in near Seoul were measured. MLSS concentrations in bioreactor were about 2,500mg/L in summer and about 4,000mg/L in winter, respectively. Tests showed that there was not much bioflocculation occurred in secondary clarifier. Average ESS/DSS (Effluent Suspended Solids/Dispersed Suspended Solids) was 100%. From the settling tests, ZSV (Zone Settling Velocity) and settling constant (n) in Vesilind equation were estimated at different MLSS temperatures. SVI (Sludge Volume Index) and SSVI (Stirred Sludge Volume Index) were also measured at different temperatures. It was found that ZSV was positively correlated with temperature and n was inversely proportional to temperature. SVI and SSVI had very similar values at about $25^{\circ}C$ of MLSS, However, SVI had more than 2 times higher values than SSVI at below $20^{\circ}C$ of MLSS. Temperature effect must be considered to design and evaluate secondary clarifier.

• 대한환경공학회지
• /
• 제35권10호
• /
• pp.694-702
• /
• 2013

본 연구의 목적은 이차침전조의 구조개선을 통해 탈수여액 처리와 생물학적 처리용량 확보의 가능성을 평가하는데 있다. 이에 따른 연구의 절차로는 탈수여액 내 함유된 polymer가 슬러지 침전에 미치는 영향을 column test를 통해 평가하였으며, 회분식 실험과 연속식 처리공정운전을 통해 탈수여액의 처리 특성을 평가하였다. 그 결과 슬러지 침강속도는 polymer 주입율이 증가할 수 록 증가하는 경향을 나타냈으며, 상징수의 SS 농도는 감소하는 것을 알 수 있었다. 탈수여액의 처리 특성은 이차침전조 내통 길이가 길수록 탈수여액 내 함유된 TSS 및 TBOD5의 제거효율이 증가하는 경향을 보였다. 또한 연속식 처리공정 적용 결과는 탈수여액 주입위치를 각각 무산소조와 이차침전조에 주입한 경우를 비교하였을 때 두 조건에서 모두 안정적인 방류수질을 보였다. 따라서 이차침전조의 구조개선을 통해 탈수여액의 효율적인 처리가 가능 할 것으로 판단되며, 소규모 하수처리장의 경우 처리용량 부족 문제를 해결할 수 있을 것으로 사료된다.

• Environmental Engineering Research
• /
• 제10권1호
• /
• pp.15-21
• /
• 2005

A computer program is developed for the prediction of the flow pattern and the removal efficiency of suspended solid (SS) in a circular secondary clarifier. In this study the increased density effect by SS on hydrodynamics has been systematically investigated in terms of Froude Number (Fr), baffle existence, and a couple of important empirical models associated with the particle settling and Reynolds stresses. A control-volume based-finite difference method by Patankar is employed together with the SIMPLEC algorithm for the resolution of pressure-velocity coupling. The k-ε turbulence and its modified version are incorporated for the evaluation of Reynolds stresses. The calculation results predicts well the overall flow pattern such as the waterfall phenomenon at the front end of the clarifier and the bottom density current with the formation of strong recirculation especially for the case of decrease of Fr. Even if there are some noticeable differences in the prediction of two turbulence models, the calculated results of the radial velocity profiles are generally in good agreement against experimental data appeared in open literature. Parametric investigation has been systematically made with the Fr and baffle condition with detailed analysis.

• 상하수도학회지
• /
• 제22권5호
• /
• pp.551-559
• /
• 2008

An experimental study was carried out to evaluate the potential of flotation process for the secondary clarifier of an activated sludge process. Flotation techniques, applied in this study, include electrofloation (EF) which generated fine bubbles smaller than $35{\mu}m$ in average and diffuser flotation (DF) which generated fine bubbles smaller than $55{\mu}m$ in average. The batch experiments were done with activated sludge displaying various characteristics. It was shown that the efficiency of solids/liquid separation was reduced as the diluted sludge volume index ($DSVI_{30}$) of activated sludge increased. The dependency, however, gradually decreased as the gas to solids (G/S) ratio increased. Thickening efficiency of EF was more than 2~10 times and DF process was more than 1.5~5 times as compared with gravity sedimentation (GS). Stable sludge blanket was maintained regardless of sludge settleability when the G/S ratio was 0.019 in the EF. On the other hand, Serious deterioration in the sludge blanket was observed in the DF depends on G/S ratio and sludge settleability. And For EF and DF, the suspended solids concentration of effluent was not nearly influenced on settleability of activated sludge and more clear than GS. A biological nutrient removal (BNR) process, combined with EF as a secondary clarifier was operated for three months. The mean MLSS (mixed liquid suspended solids) concentration in the reactor and mean solids concentration of return sludge were estimated to be 5,340 mg/L and 16,770 mg/L, respectively. The water quality of effluent was considerably stable and low value was accomplished, that was, standard suspended solids concentration $0.07{\pm}0.51mg/L$ and standard turbidity $1.44{\pm}0.56NTU$. The EF could be applicable for enhancement of efficiency of activated sludge system as well as improvement of the water quality of effluent.