• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.13 no.1
• /
• pp.117-126
• /
• 1983

The mandibular canal must be considered carefully during surgical treatment, especially surgical extraction of the impacted tooth and intraosseous implant because it contains the important inferior alveolar nerve and vessels. The author investigated the curvatUre of the mandibular canal, the positional frequency of mandibular foramen to the occlusal plane and gonial angle and the positional frequency of the mental foramen to the tooth site using orthopantomograms. The materials consisted of 295 orthopantomograms divided into seven groups ranging from the first decade to 6th. decade. The results were as follows: 1. The position of mandibular foramen was most frequently below occlusal plane in Group Ⅰ (78.6%) and Group Ⅱ (71.2%), above occlusal plane in Group Ⅲ (63.0%), Group IV (71.1%), Group V (57.6%), Group (76.7%) and Group VII (70.0%). 2. The curvature of mandibular canal was 142.8° in Group Ⅰ, 142.09° in Group Ⅱ, 139.34° in Group Ⅲ, 141.48° in Group Ⅳ, 138.45° in Group Ⅴ, 140.77° in Group Ⅵ and 143.89° in Group Ⅶ. 3. The gonial angie was 125.82° in Group Ⅰ, 123.18° in Group Ⅱ, 124.06° in Group Ⅲ, 120.45° in Group Ⅳ, 121.12° in Group Ⅴ, 121.63° in Group Ⅵ and 121.24° in Group Ⅶ. 4. The position of the menta] foramen was most frequently below the apex of mandibular first premolar in Group Ⅰ (57.2%), between the apex of mandibular first and second premolar in Group Ⅱ (59.6%) and Group Ⅲ (48.9%), and below the apex of mandibular second premolar in Group Ⅳ (39.2%), Group Ⅴ (48.5%) Group Ⅵ(46.6%) and Group Ⅶ(56.4%)

• Restorative Dentistry and Endodontics
• /
• v.39 no.4
• /
• pp.319-323
• /
• 2014

In dentistry, the term 'fusion' is used to describe a developmental disorder of dental hard tissues. In the permanent dentition, fusion of a normal tooth and a supernumerary tooth usually involves the incisors or canines. However, a few cases of fusion involving premolars have also been reported to date. We present a rare case in which fusion of the maxillary left second premolar and a supernumerary tooth in a 13-year-old girl was diagnosed using cone beam computed tomography (CBCT, Alphard-3030, Asahi Roentgen Ind. Co., Ltd.). The tooth was bicuspidized after routine nonsurgical root canal treatment, and the separated teeth underwent appropriate restoration procedures. The second premolar and supernumerary tooth remained asymptomatic without any signs of inflammation after a follow-up period of 9 years. Identification of anatomical anomalies is important for treatment in cases involving fusion with supernumerary tooth, and therefore the microscopic examinations and CBCT are essential for the diagnosis. Fused teeth can be effectively managed by the comprehensive treatment which includes both endodontic and periodontal procedures.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.2
• /
• pp.253-261
• /
• 2009

The purpose of this study was to present new data on the timing and sequence of permanent teeth emergence and to compare these findings with the results of earlier studies. The dental examinations had been performed to E-elementary school students, who visited the Yonsei University Dental Hospital between 1998 and 2005; 1,307 boys and 1,312 girls with the age ranging from 6 to 12 years old. The followings were concluded. 1. Eruption time of the maxillary permanent teeth is as follows. It was 6.81 years in male and 6.73 years in female for the central incisor, 7.78 years in male and 7.65 years in female for the lateral incisor, 10.48 years in male and 9.92 years in female for the canine, 9.76 years in male and 9.63 years in female for the first premolar, 10.66 years in male and 10.49 years in female for the second premolar, 6.39 years in male and 6.26 years in female for the first permanent molar, and 12.13 years in male and 12.03 years in female for the second permanent molar. 2. Eruption time of the mandibular permanent teeth is as follows. The central incisor could not be determined in this study, but it is assumed to erupt before the age of 6.08. In the mandible, eruption time was 6.78 years in male and 6.65 years in female for the lateral incisor, 9.76 years in male and 9.05 years in female for the canine, 9.82 years in male and 9.59 years in female for the first premolar, 10.67 years in male and 10.52 years in female for the second premolar, 6.22 years in male and 6.12 years in female for the first permanent molar, and 11.58 years in male and 11.14 years in female for the second permanent molar. 3. The eruption sequence is as follows. In the maxilla, the first permanent molar erupted first, followed by the central incisor, the lateral incisor, the first premolar, the canine, the second premolar, and the second permanent molar. In the mandible, the central incisor erupted first, followed by the first permanent molar, the lateral incisor, the canine, the first premolar, the second premolar, and the second permanent molar. 4. Tooth eruption occurred earlier in female compared to male by average of 0.19 year in the maxilla and 0.29 year in the mandible. 5. In both male and female, the hiatus (interval of rest) occurred between the emergence of lateral incisor and first premolar in the maxilla while it was observed between the lateral incisor and canine in the mandible. Male had a hiatus of 1.98 years in the maxilla and 2.90 years in the mandible, while the female's were 1.98 years and 2.40 years, respectively.

• The Journal of Korean Academy of Prosthodontics
• /
• v.31 no.4
• /
• pp.580-610
• /
• 1993

The purpose of this study was to analyse the deflection and stress distribution at the supporting bone and it's superstructure by the alteration of angulation between implant and it's implant abutment. For this study, the free-end saddle case of mandibular first and second molar missing would be planned to restore with fixed prosthesis. So the mandibular second premolar was prepared for abutment, and the cylinder type osseointegrated implant was placed at the site of mandibular second molar for abutment. The finite element stress analysis was applied for this study. 13 two-dimensional FEM models were created, a standard model at $0^{\circ}$ and 12 models created by changing the angulation between implant and implant abutment as increasing the angulation mesially and distally with $5^{\circ}$ unittill $30^{\circ}$. The preprocessing decording, solving and postprocessing procedures were done by using FEM analysis software PATRAN and SUN-SPARC2GX. The deflections and von Mises stresses were calculated under concentrated load (load 1) and distributed load(load 2) at the reference points. The results were as follows : 1. Observing at standard model, the amount of total deflection at the distobuccal cusp-tip of pontic under concentrated load was largest of all, and that at the apex of implant was least of all, and the amount of total deflection at the buccal cusp-tip of second premolar under distributed load was largest of all, and that at the apex of implant was least of all. 2. Increasing the angulation mesially or distally, the amounts of total deflection were increased or decreased according to the reference points. But the order according to the amount of total deflection was not changed except apex of second premolar and central fossa of implant abutment under concentrated load during distal inclination. 3. Observing at standard model, the von Mises stress at the distal joint of pontic under concentrated load was largest of all, and that at the apex of implant was least of all. The von Mises stress at the distal margin of second premolar under distributed load was largest of all, and that at the apex of Implant was least of ail. 4. Increasing the angulation of implant mesially, the von Mises stresses at the mesial crest of implant were increased under concentrated load and distributed load, but those were increased remarkably under distributed load and so that at $30^{\circ}$ mesial inclination was largest of all. 5. Increasing the angulation of implant distally, the von Mises stresses at the distal crest of implant were increased remarkably under concentrated load and distributed load, and so those at $30^{\circ}$ distal inclination were largest of all.

• The Journal of Advanced Prosthodontics
• /
• v.7 no.6
• /
• pp.460-467
• /
• 2015

PURPOSE. The aim of this study is to evaluate the appropriate impression technique by analyzing the superimposition of 3D digital model for evaluating accuracy of conventional impression technique and digital impression. MATERIALS AND METHODS. Twenty-four patients who had no periodontitis or temporomandibular joint disease were selected for analysis. As a reference model, digital impressions with a digital impression system were performed. As a test models, for conventional impression dual-arch and full-arch, impression techniques utilizing addition type polyvinylsiloxane for fabrication of cast were applied. 3D laser scanner is used for scanning the cast. Each 3 pairs for 25 STL datasets were imported into the inspection software. The three-dimensional differences were illustrated in a color-coded map. For three-dimensional quantitative analysis, 4 specified contact locations(buccal and lingual cusps of second premolar and molar) were established. For two-dimensional quantitative analysis, the sectioning from buccal cusp to lingual cusp of second premolar and molar were acquired depending on the tooth axis. RESULTS. In color-coded map, the biggest difference between intraoral scanning and dual-arch impression was seen (P<.05). In three-dimensional analysis, the biggest difference was seen between intraoral scanning and dual-arch impression and the smallest difference was seen between dual-arch and full-arch impression. CONCLUSION. The two- and three-dimensional deviations between intraoral scanner and dual-arch impression was bigger than full-arch and dual-arch impression (P<.05). The second premolar showed significantly bigger three-dimensional deviations than the second molar in the three-dimensional deviations (P>.05).

• The Journal of Advanced Prosthodontics
• /
• v.11 no.5
• /
• pp.262-270
• /
• 2019

PURPOSE. The purpose of this in vitro study was to evaluate the marginal misfits of three-unit frameworks fabricated with conventional and digital impressions techniques. MATERIALS AND METHODS. Thirty brass canine and second premolar abutment preparations were fabricated by using a computer numerical control machine and were randomly divided into 3 groups (n=10) as follows: conventional impression group (Group Ci), Cerec Omnicam (Group Cdi), and 3shape TRIOS-3 (Group Tdi) digital impression groups. The laser-sintered metal frameworks were designed and fabricated with conventional and digital impressions. The marginal adaptation was assessed with a stereomicroscope at ${\times}30$ magnification. The data were analyzed with 1-way analysis of variances (ANOVAs) and the independent simple t tests. RESULTS. A statistically significant difference was found between the frameworks fabricated by conventional methods and those fabricated by digital impression methods. Multiple comparison results revealed that the frameworks in Group Ci (average, $98.8{\pm}16.43{\mu}m$; canine, $93.59{\pm}16.82{\mu}m$; premolar, $104.10{\pm}15.02{\mu}m$) had larger marginal misfit values than those in Group Cdi (average, $63.78{\pm}14.05{\mu}m$; canine, $62.73{\pm}13.71{\mu}m$; premolar, $64.84{\pm}15.06{\mu}m$) and Group Tdi (average, $65.14{\pm}18.05{\mu}m$; canine, $70.64{\pm}19.02{\mu}m$; premolar, $59.64{\pm}16.10{\mu}m$) (P=.000 for average; P=.001 for canine; P<.001 for premolar). No statistical difference was found between the marginal misfits of canine and premolar abutment teeth within the same groups (P>.05). CONCLUSION. The three-unit frameworks fabricated with digital impression techniques showed better marginal fit compared to conventional impression techniques. All marginal misfit values were clinically acceptable.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.41 no.1
• /
• pp.54-63
• /
• 2014

Transposition is a unique and extreme form of ectopic eruption where a tooth develops and erupts in a position, normally occupied by an adjacent tooth. Generally, three treatment options are available when the maxillary canine and first premolar are transposed. In the first treatment option, the transposed position of the teeth can be maintained such that the first premolar is moved to the position of the canine. Second, extraction of the maxillary first premolar can be considered. Third, the position of the transposed teeth can be corrected such that their normal positions in the arch are restored. Factors that should be considered in treatment modality decision include function, occlusion, periodontal support, treatment time, patient cooperation, and esthetic demands. This report describes cases of maxillary canine-premolar transposition treated with each of the three aforementioned treatment options. In the first case, transposed teeth were arranged in their transposed position. The second case was an extraction case. In the third case, orthodontic treatment and surgical repositioning were conducted.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.8 no.1
• /
• pp.21-24
• /
• 1981

The author observed a case of ectopic erupted maxillary second premolars and impacted mandibular second premolars due to premature loss of the primary second molars. The treatments were done as follows: 1. In the maxilla, the teeth arrangement problem was corrected with removal of the ectopic erupted second premolars. 2. In the mandible, normal dentition was established with surgical removal of the left second premolar and removal of the permanent first molar in right side combined by orthodontic therapy.

• The korean journal of orthodontics
• /
• v.10 no.1
• /
• pp.55-64
• /
• 1980

The purpose of this study was to investigate the interrelationship of the experimental group and control group by analyzing case histories, intraoral radiographs, orthopantomographs, intraoral slide films and dental casts. The data for this study were complied from 654 outpatients of the Department of Orthodontics, Seoul National University Hospital. The following conclusions were obtained. 1. When one or more thins molar teeth were congenitally missing, the incidence of the other congenitally missing teeth was high. 2. The frequency of congenitally missing teeth was comparatively higher in male, maxilla, class II and class III. 3. The congenitally missing srea of the third molar by Angle's classification was not significant. 4. The order of frequency of congenitally missing teeth was the third molar, the second premolar, the lateral incisor, the first premolar, the central incisor, the canine, the first molar, the second molar.

• The Journal of the Korean dental association
• /
• v.12 no.9
• /
• pp.707-712
• /
• 1974

The 800 extracted permanent teeth of first and second premolar were observed and obtained the following results: Those teeth were extracted from the population of dentistless rural area. The cause of extraction of those teeth was only the dental caries. It was performed by the free dental service team from 1966 to 1973. The findings were as follows: 1. The most incidence of caries occurrence was on the distal surface and the least was mesial side occlusal surface. 2. The average rate of decayed surface was higher in the second premolar group than the first permolar. 3. The average rate of decayed surface was higher in the teeth of mandible than maxilla. 4. The average rate of decayed surface was higher in female than male. 5. The average rate of decayed surface per tooth was 3.05±1.83.