• Korean Journal of Breeding Science
• /
• v.43 no.2
• /
• pp.120-125
• /
• 2011

A field experiment was conducted to examine the fruit quality characters in second generation ($F_2$) hybrid cultivar and to compare the fruit characters with original $F_1$ hybrid cultivar of minipaprika (yellow and orange type) at the Research Farm, Hwacheon in July, 2010. Fruit characters varied within $F_2$ population of each minipaprika type. In minipaprika yellow, fruit weight varied from 12.2 g to 50.8 g (average 28.5 g) and fruit length/width varied from 1.4 to 2.8 (average, 2.0). Pericarp thickness ranged from 1.8 mm to 4.1 mm (average, 2.9 mm). Total soluble solid (TSS) varied from $6.2^{\circ}Brix$ to $13.5^{\circ}Brix$ with an average of $8.7^{\circ}Brix$. Fruit volume varied from 10.3 cc to 46.7 cc with an average of 24.4 cc. In minipaprika orange type, fruit weight ranged from 19.7 g to 42.4 g (average, 29.0 g) and fruit length/width varied from 1.5 to 2.6 (average, 2.0). Pericarp thickness varied from 2.1 mm to 4.1 mm with an average of 3.0 mm. TSS varied from $5.0^{\circ}Brix$ to $12.2^{\circ}Brix$ (average, $7.9^{\circ}Brix$) and average fruit volume was 24.6 cc ranging from 10.7 cc to 35.0 cc. The average fruit quality characters in $F_2$ population in both yellow and orange minipaprika did not differ from their $F_1$ hybrid parent and $F_2$ seed can be an additional way to supply high yielding hybrid cultivars at lower cost to the minipaprika growers.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.6
• /
• pp.733-738
• /
• 2000

The objective of this study was to describe the nature of the inheritance of jumping as a behavioral trait and to analyze quantitatively the jumping height as a measure of vigor in two subspecies of mice. Two subspecies of mice, Yonakuni wild mouse (Y) and $CF_{{\sharp}1}$ laboratory mouse (C), were used as the parental types. Reciprocal mating between these two subspecies was made to produce subsequently the first and second generations. The first generation was $F_1$ (YC) resulting from $Y\;male{\times}C\;female$, and $F_1{^\prime}$ (CY) from $C\;male{\times}Y\;female$. The second generation $F_2$ (YCYC) was from mating $F_1{\times}F_1$ and $F_2{^\prime}$ (CYCY) from $F_1{^\prime}{\times}F_1{^\prime}$. Individuals were treated with a set of direct current shock apparatus at six weeks of age to evoke jumping. The results showed that the ratio between jumping and non jumping mice (J: NJ) for C was 0%:100% (0:1), which means that all C did not jump throughout the experiment, whereas Y was 68%:32% (2:1); and the $F_1$ and $F_2$ showed 65%:35% (2:1) and 51%:49% (1:1), respectively. All $F_1{^\prime}$ and $F_2{^\prime}$ individuals jumped as indicated by the ratio 100%:0% (1:0) for both these two genetic groups. Of the jumped mice, average height of the first three jumping observed for pooled sexes in Y, $F_1$, $F_2$, $F_1{^\prime}$ and $F_2{^\prime}$ were 19.3 cm, 19.3 cm, 18.0 cm, 19.9 cm and 16.4 cm, respectively. The distribution of jumping height showed a tendency to be a normal distribution. The jumping activity and jumping height may be affected by some major genes and polygenes, respectively.

• Current Optics and Photonics
• /
• v.5 no.4
• /
• pp.458-465
• /
• 2021

Borate nonlinear optical crystals have been used as frequency conversion devices in many fields due to their unique transparency and nonlinearity from ultraviolet to visible spectral range. In this study, we theoretically and numerically investigate the properties of broadband second harmonic generation (SHG) in the recently reported Pna2₁-Ba₃Mg₃(BO₃)₃F₃ (BMBF) crystal. The technique is based on the simultaneous achievement of birefringence phase matching and group velocity matching between interacting waves. We discussed all factors required for broadband SHG in the BMBF in terms of two types of phase matching and group velocity matching conditions, the beam propagation direction and the corresponding effective nonlinearity and spatial walk-off, and the spectral responses. The results show that bandwidths calculated in the broadband SHG scheme are 220.90 nm (for Type I) and 165.85 nm (for Type II) in full-width-half-maximum (FWHM). The central wavelength in each case is 2047.76 nm for Type I and 1828.66 nm for Type II at room temperature. The results were compared with the non-broadband scheme at the telecom C-band.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.680-685
• /
• 2006

This paper describes the aeroelastic stability test of the small-scaled 'Next-Generation Blade(NRSB)' with NRSH (Next-Generation Hub System) and HCTH hingeless hub system in hover and forward flight conditions. Excitation tests of rotor system installed in GSRTS(General Small-scale Rotor Test System) at KARI(Korea Aerospace Research Institute) were tarried out to get lead-lag damping ratio of blades with flexures as hub flexure. MBA(Moving Block Analysis) technique was used for the estimation of lead-lag damping ratio. First, NRSB-1F blades with HCTH hub system, Then NRSB-1F with NRSH hub system were tested. Second, NRSB-2F blades with NRSH hub system were tested. Tests were done on the ground and in the wind tunnel according to the test conditions of hover and forward flight, respectively. Non-rotating natural frequencies, non-rotating damping ratios and rotating natural frequencies were showed similar level fir each cases. Estimated damping ratios of NRSB-1F, NRSB-2F with HCTH and NRSH were above 0.5%, and damping ratio increased by collective pitch angle increasement. Furthermore damping ratios of NRSB-2F were higher than damping ratios of NRSB-1F in high pitch angle. It was confirmed that the blade design for noise reduction would give observable improvement in aeroelastic stability compared to paddle blade and NRSB-1F design.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.8 s.113
• /
• pp.848-856
• /
• 2006

This paper describes the aeroelastic stability test of the small-scaled 'Next-generation Blade(NRSB)' with NRSH (next-generation hub system) and HCTH hingeless hub system in hover and forward flight conditions. Excitation tests of rotor system installed in GSRTS (general small-scale rotor test system) at KARI (Korea Aerospace Research Institute) were carried out to get lead-lag damping ratio of blades with flexures as hub flexure. MBA(moving block analysis) technique was used for the estimation of lead-lag damping ratio. First, NRSB-1F blades with HCTH hub system, then NRSB- 1F with NRSH hub system were tested. Second, NRSB-2F blades with NRSH hub system were tested. Tests were done on the ground and in the wind tunnel according to the test conditions of hover and forward flight, respectively. Non-rotating natural frequencies, non-rotating damping ratios and rotating natural frequencies were showed similar level for each cases. Estimated damping ratios of NRSB-1F, NRSB-2F with HCTH and NRSH were above 0.5%, and damping ratio increased by collective pitch angle increasement. Furthermore damping ratios of NRSB-2F were higher than damping ratios of NRSB-1F in high Pitch angle. It was confirmed that the blade design for noise reduction would give observable improvement in aeroelastic stability compared to paddle blade and NRSB-1F design.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.2
• /
• pp.606-615
• /
• 1997

This paper proposes an dffcient method for test pattern generation.Current test pattern genration systems generate a test vester for fault $F_{i+l}$ independently of the computation previously done for faults F1,F2...,Fi The proposed algorithm generates a test vector for fault $F_{i+l}$ by inheriting the test vector for fault Fi. A new test vector is grnerated from inherited values by gradually changing the inhderited values .The inherited values may partially activate a fauog and propagate the fault signal,Normally,this reduses the number of decision steps and backtracks in the second search.Experimental results for well-Known benchmark circuts show that the proposed algorithm is very efficient with small backtrack kimit;in combination eith other algorithms,it is very efficient for arbitrary backtrack limits.

• Animal Bioscience
• /
• v.36 no.3
• /
• pp.417-428
• /
• 2023

Objective: Few studies have genetically monitored chickens over time, and no research has been conducted on ducks. To ensure the sustainable management of key duck breeds, we used microsatellite markers to monitor Brown Tsaiya ducks over time genetically. Methods: The second, fourth, sixth to eighth generations of the Brown Tsaiya duck selected for feeding efficiency and control lines were included in this study to investigate the genetic variations, effective population size, population structure and the differentiation between populations over time with 11 microsatellite markers derived from Brown Tsaiya duck. Results: The results showed there were a slight decrease in the genetic variations and an increase in within-population inbreeding coefficient (F_IS) in both lines, but no consistent increase in F_IS was observed in each line. The effective population size in the second and eighth generations was 27.2 for the selected line and 23.9 for the control line. The change in allele richness showed a downward trend over time, and the selected line was slightly lower than the control line in each generation. The number of private alleles (N_p) in the selected line were higher than in the control line. Moderate differentiation was observed between the second and eighth generations in the selected line (F_ST = 0.0510) and the control line (F_ST = 0.0606). Overall, differentiation tended to increase with each generation, but genetic variation and structure did not change considerably after six generations in the two lines. Conclusion: This study provides a reference for poultry conservation and helps to implement cross-generation genetic monitoring and breeding plans in other duck breeds or lines to promote sustainable management.

• Journal of Environmental Health Sciences
• /
• v.30 no.2
• /
• pp.71-78
• /
• 2004

This study was performed to evaluate developmental and estrogenic activity of bisphenol A (BPA) and butyl benzyl phthalate (BBP) to the second generation of Sprague-Dawley rats ingested during gestational or lactational periods. Rats were given BPA 20$\mu\textrm{g}$/kg BBP 100mg/kg of pregnancy or lactation periods. Maternal body weight and neonatal body weight were recorded. The rats were sacrificed on day 21 after birth. Reproductive organs of dam and neonate were utilized for receptor binding assay. The plasma concentrations of BPA and MBep, one of the major metabolites of BBP were analyzed with HPLC. The co-administration of BPA and BBP induced slow weight gain compared with single administration in dams. Also, such mixture induced low neonatal body weights in next generation. The dams treated with BPA and BBP during lactational periods showed significant organ weight changes in liver and spleen. The dams exposed during lactational periods showed significant organ weight changes not only in liver and spleen but also in kidney, uterus and ovary. The F1 female rats exposed during lactation periods showed significant organ weight changes in liver, spleen, ovary. The F1 male rats showed significant organ weight changes in liver, kidney, epididymis, vesicular glands, prostate. However, no clear synergistic effects of BPA and BBP were noted. There was no significantly different ER$\alpha$ expression pattern between control and treated groups. However, ER$\alpha$ expression were increased in F1 male testis and female uterus. PI male showed distinct ER$\alpha$ expression, especially in the group of lactational combined exposure. Synergistic ER$\alpha$ expression was found by combined treatment of BPA and BBP. We could not find any evidences of synergistic effects on BPA and/or BBP combined administration on dams and their fetuses, except in ER$\alpha$ expression of F1 male.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.491-492
• /
• 2006

The MMIC (Microwave Monolithic Integrated Circuit) self oscillating double conversion mixer was designed and fabricated for the V-band transmitter applications. The MMIC self oscillating double conversion mixer which dose not need external local oscillator was designed using GaAs PHEMT technology. The first self oscillating mixer use PHEMT technology. The first self oscillating mixer use PHEMT for $f_{LO}$ signal generation and $f_{IF}$ signal is applied at gate port and $f_{RF1}$ signal is generated at a drain port of first stage. The second gate mixer use PHEMT for $f_{LO}$ signal and $f_{RF1}$ signal is applied at gate port and $f_{RF2}$ signal is output at a drain port of second stage.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.2
• /
• pp.298-309
• /
• 1990

In this paper, a new method is suggested to analyze impulsive stresses at loading poing of concentrated impact load under certain impact conditions determined by impact velocity, stiffness of plate and mass of impact body, etc. The impulsive stresses are analyzed by using the three dimensional dynamic theory of elasticity so as to analytically clarify the generation phenomenon of cone crack at the impact fracture of fragile materials (to be discussed if the second paper). The Lagrange's plate theory and Hertz's law of contact theory are used for the analysis of impact load, and the approximate equation of impact load is suggested to analyze the impulsive stresses at the impact point to decide the ranage of impact load factor. When impact load factors are over and under 0.263, approximate equations are suggested to be F(t)=Aexp(-Bt)sinCt and F(t)=Aexp(-bt) {1-exp(Ct)} respectively. Also, the inverse Laplace transformation is done by using the F.F.T.(fast fourier transform) algorithm. And in order to clarity the validity of stress analysis method, experiments on strain fluctuation at impact point are performed on a supported square glass plate. Finally, these analytical results are shown to be in close agreement with experimental results.