• Journal of The Korean Society of Agricultural Engineers
• /
• v.55 no.3
• /
• pp.35-40
• /
• 2013

The present study was conducted to investigate the adsorption potential of red mud for fluoride removal. Different operation parameters such as the effect of contact time, initial concentration, pH, competing anions, seawater, adsorbent dose amount, and adsorbent mixture were studied. Nearly 3 hr was required to reach sorption equilibrium. Equilibrium sorption data were described well by Langmuir model and the maximum adsorption capacity of red mud was 5.28 mg/g. The fluoride adsorption at pH 3 was higher than in the pH range 5-9. The presence of anions such as sulfate, nitrate, phosphate, and bicarbonate had no significant effect on fluoride adsorption onto red mud. The fluoride removal by red mud was greater in seawater than deionized water, resulting from the presence of calcium and magnesium ion in seawater. The use of red mud alone was more effective for the removal of fluoride than mixing red mud with other industrial waste such as oyster shells, lime stone, and steel slag. This study showed that red mud has a potential application in the remediation of fluoride contaminated soil and groundwater.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.10a
• /
• pp.895-896
• /
• 2012

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.532-536
• /
• 2001

LD slag, that is, a by-product of steel making process, has been mainly used as land construction materials. Recently, the seashore application of LD slag was tried in Japan and Korea but the reaction between LD slag and seawater was not studied yet. We tried to clarify the leaching reaction and/or mechanism of LD slag and the reaction between seawater and LD slag. We tried to apply these results to the decarbonization of seawater for seawater magnesia process. The high pH solution(over 12) was injected into the sea water and the pH of mixed liquid was adjusted to 9.8. This mixed solution was aged for 8 hours and the 104ppm of CO$_3$$^{-2}$ in the sea water was decreased to 23ppm with the negligible loss of $Mg^2$$^{+}$. The slag particle was directly inserted into the seawater fur practical application. The 0.5~1mm particles were suitable for decarbonization when 5 grade slags mentioned above were reacted with sea water. In this case, the content of CO$_3$$^{-2}$ in the sea water was 53 ppm with the negligible loss of $Mg^2$$^{+}$ after 8 hours aging. The direct application of slag particle fur the decarbonization of seawater takes more reaction time.ime.

• Applied Chemistry for Engineering
• /
• v.34 no.6
• /
• pp.567-575
• /
• 2023

Water electrolysis is undergoing active research as one of the promising technologies for producing effective green hydrogen. Using seawater directly as a raw material for a water electrolysis system can solve the problem of the limitations of existing freshwater raw materials, as seawater accounts for approximately 97% of the water on Earth. At the same time, abundant by-product materials can be obtained, representative examples of which are Cl₂, ClO^-, Br₂, and Mg(OH)₂ produced during electrolysis, depending on their composition and pH environment. In order to develop a successful seawater electrolysis system and oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) catalysts, it is necessary to understand the causes and consequences of reactions that occur in the seawater environment. Therefore, in this paper, we will investigate the reaction mechanism and characteristics of the seawater electrolysis system as well as the research and development trends of electrochemical catalysts used in anode and cathode electrodes.

• The Journal of Engineering Geology
• /
• v.13 no.1
• /
• pp.17-27
• /
• 2003

In this study, a phenomenon of saltwater intrusion was monitored under various conditions regarding recharge and pumping rate using time domain reflectometry for a laboratory scale unconfined aquifer to verify the basic theory behind seawater intrusion and to investigate movement of salt-freshwater interface in accordance with the ratio of pumping and recharge rate. Results showed that a thick mixing zone was formed at the boundary instead of a sharp salt-freshwater interface that was assumed by Ghyben and Herzberg who derived an equation relating the water table depth $(H_f)$ to the depth to the interface $(H_s)$. Therefore our experimental results did not agree with the calculated values obtained from the Ghyben and Herzberg equation. Position of interface which was adopted as 0.5 g/L isochlor moved rapidly as the Pumping rate $(Q_p)$ increased for a given recharge rate $(Q_r)$. In addition, interface movement was found to be about 7 times the ratio of $Q_p/Q_r$ in our experimental condition. This indicates that Pumping rate becomes an important factor controlling the seawater intrusion in coastal aquifer.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.49 no.5
• /
• pp.556-563
• /
• 2016

We examined the removal of hazardous heavy metals (Cd, Cr, and Pb) from laver Pyropia sp. using citric, hydrochloric, and nitric acids. Under the same conditions, the quality of the laver samples was also evaluated using the variation in absorbance and major mineral levels. The heavy metals that accumulated in raw laver samples after 3 days in seawater included Pb (117.79 μg/g), Cr (33.53 μg/g), and Cd (10.54 μg/g) in descending order. The rate of heavy metal removal from laver was higher at lower pH for all acids used. However, its color changed unsatisfactorily at pH 2.0. After 10 min in seawater at pH 2.5, the heavy metals in laver were eliminated in the order Cd (68.7–81.6%), Pb (57.7–67.0%), and Cr (31.9–49.4%) using the three acids. The differences in heavy metal removal among acid types were not significant. The laver quality was not affected after 20 min at the pH range of 2.5–4.0. The maximum removal of heavy metals was from laver soaked for 10 min in seawater at pH 2.5 using the organic acid, citric acid.

• Mycobiology
• /
• v.32 no.2
• /
• pp.79-87
• /
• 2004

An experiment was carried out to investigate the effects of pre-inoculation with the mycorrhizal fungus Glomus clarum and foliar application of kinetin on the growth of mungbean plant irrigated wht different dilution of seawater. Arbuscular-mycorrhizal(AM) infection significantly increased dry weight, height, chlorophyll, sugar and protein content, nitrogen and phosphorus-use efficiencies, leaf conductivity, transpiration rate, nitrogenase, acid and alkaline phosphates activities of all salinized mungbean plants in comparison with control and non-mycorrhizal plants irrespective of the presence or absence of kinetin. Mycorrrhizal plants showed higher concentrations of N, P, K, Ca and Mg and lower Na/N, Na/P, Na/K, Na/Ca and Na/Mg ratios than non-mycorrhizal plants when irrigated with certain dilution of seawater. Mungbean plants showed 597% and 770% dependency on AM fungus G. clarum in absence and presence of kinetin, respectively, for biomass production under a level of 30% of seawater. The average value of tolerance index for mycorrhizal plants accounted 267% and 364% in absence and presence kinetin respectively. This study provides evidence for the benefits of kinetin which are actually known for mycorrhizal than non-mycorrhzal plants. AM fungus and kinetin protected the host plants against the detrimental effects of salt. However, mycorrhizal infection was much more effective than kinetin applications. Thus management applications of this arbuscular mycorrhizal endophyte(G. clarum) with kinetin could be of importance in using seawater in certain dilution for irrigation in agriculture.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.46 no.1
• /
• pp.46-52
• /
• 2013

After an outbreak of viral disease in an aquafarm, release of virus (es) from infected fish into environmental seawater has been suspected. In the present study, we utilized a negatively charged membrane (HA type) as an efficient method for concentration and detection of fish pathogenic viruses, specifically, megalocytivirus and viral hemorrhagic septicemia virus (VHSV) present in field-collected seawater samples or inoculated into seawater artificially. Positively charged viruses adsorbed onto the negatively charged membrane and were eluted with 1 mM NaOH (pH 10.5) following rinsing with 0.5 mM $H_2SO_4$ (pH 3.0). Megalocytivirus and VHSV particles isolated using anegatively charged HA membrane from seawater inoculated with each virus at a concentration of 10 viral particles/mL were of sufficient quantity to show positive results in atwo-step PCR (or RT two-step PCR); however, despite it being negatively charged, a cellulose acetate (CA) membraneshowed negative results. In quantitative PCR, the detection limits of the HA membrane for megalocytivirus and VHSV in seawater were 1.20E+00 viral particles/mL and 1.22E+01 viralparticles/mL, respectively. The calculated mean recovery yields from 1 L seawater spiked with known concentrations of megalocytivirus and VHSV particles were 28.11% and 23.00%, respectively. The concentrate of a 1-L sample of culturing seawater from the aquatank of flounder suffering from VHSV showed clear positive results in PCR when isolated with an HA, but not a CA, membrane. Thus, viral isolation using an HA membrane is a practical and reliable method for detection of fish pathogenic viruses in seawater.

• Journal of Wetlands Research
• /
• v.12 no.1
• /
• pp.75-82
• /
• 2010

This study was performed to figure out what would be effective to improve water environment in a retention pond which was located in Incheon. Chemical coagulation, seawater flocculation and Fenton treatment were carried out to improve water and sediment quality for the retention pond. Experimental results showed that pH of 11 was optimum pH for seawater flocculation and the high removal rates in terms of SS and T-P can be obtained by seawater flocculation. To eliminate the pollutants from the sediments we applied Fenton oxidation process. We compared whether direct oxidizing the sediments would be more effective than oxidizing them after elution. By Fenton oxidation only, the COD removal rate was 0.55 grams per one $H_2O_2$ gram. Whereas the removed COD grams per one $H_2O_2$ gram were 0.69 by Fenton oxidation after elution. It showed that the oxidizing after elution was about 25% more effective than the oxidizing without elution. Both treatments could improve the water quality of a retention pond from a level 6(very bad) to a level 3(normal) of Lake Water Quality Standard.

• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.1
• /
• pp.81-87
• /
• 2006

In marine air pollution control, SCR (Selective Catalytic Reduction) is reconized as the most effect method to control NOx, but on the other hand. seawater scrubber applying the basic characteristic that is naturally alkaline (pH typically around 8.1) is viewed as an economical SOx removal system at present. Especially, seawater scrubber would not be necessary to follow any of the various land based flue gas desulfurization methods. i.e. wet, dry or alkali scrubbing. However, these methods are not readily adaptable to marine conditions due to the quantifies of consumables required i.e. lime or limestone, the means of operation and the commercial availability. This research is undertaken to develop a new method as the main target of eliminating all exhaust emissions, particularly vessel, because of easy access to seawater and apt to apply a wet scrubber system. First, using the acidic seawater by seawater electrolysis, nitric monoxide(NO) is adequately oxidized to nitric dioxide $(NO_2)$by ClOx-in the acidic seawater, the electrolyzed alkaline seawater by electrolysis which contains mainly NaOH together with alkali metal ions $(i.e\;Na^{+}\;K^{+},\;Mg_{2}\;^{+},\;Ca_{2}\;^{+})$, is used as the absorption medium of NOx, the SOx are absorbed by relatively high solubility compared to other components of exhaust pollutants. The results found that the NOx and SOx removals could be achieved nearly Perfect.