• Structural Engineering and Mechanics
• /
• 제68권5호
• /
• pp.591-601
• /
• 2018

Non-moment beam-to-column connections, which are usually referred to as simple or shear connections, are typically designed to carry only gravity loads in the form of vertical shears. Although in the analysis of structures these connections are usually assumed to be pinned, they may provide a small amount of rotational stiffness due to the typical connection details. This paper investigates the effects of this small rotational restraint of simple beam-to-column connections on the behavior and seismic response of steel braced non-moment resisting frames. Two types of commonly used simple connections with bolted angles, i.e., the Double Web angle Connection (DWC) and Unstiffened Seat angle Connection (USC) are considered for this purpose. In addition to the pinned condition - as a simplified representation of these connections - more accurate semi-rigid models are established and then applied to some frame models subjected to nonlinear pushover and nonlinear time history analyses. Although the use of bracing elements generally reduces the sensitivity of the global structural response to the behavior of connections, the obtained results indicate considerable effects on the local responses. Namely, our results show that consideration of the real behavior of connections is essential in designing the column elements where the pin-connection assumption significantly underestimates design of outer columns of upper stories.

• 한국신경인지재활치료학회지
• /
• 제10권2호
• /
• pp.19-26
• /
• 2018

목적: 본 거북목 교정용 의자는 사람의 엉덩이와 정강이를 지지하여 사람의 자세를 교정하는 의자로서, 정강이를 경사상으로 지지하는 정강이 지지대와 정강이가 정강이 지지대에 경사 상으로 지지되었을 때 사람의 엉덩이를 경사 상으로 지지하는 엉덩이 지지대와 정강이 지지대와 엉덩이 지지대가 각각 결합되어 지지되는 메인프레임과 엉덩이 지지대 상부에 결합되며 엉덩이의 형상에 상응하여 유동적으로 함입되는 유동시트를 포함하며, 유동시트에 엉덩이가 균등하게 함입되도록 함으로써 불안정한 엉덩이 지지면을 제공하여, 지속적으로 자세에 대한 자극을 주어 사람이 자세를 인지함에 따라 교정되도록 고안된 자세 교정용 의자이다. 결과: 자세 교정용 의자에 사람이 착석하게 되면, 정강이와 엉덩이가 경사 상으로 지지되고 이에 따라 허리가 펴지게 되는데, 허리의 펴짐에 따라 어깨가 뒤로 젖혀지면서 가슴이 펴지고 목이 몸의 중앙에 위치하게 되어 사람의 자세를 교정할 수 있다. 불균형한 자세는 의자에 착석한 사람에게 자세 불량에 따른 불편함을 초래하고, 불편함을 해소하기 위해 자세 교정용 의자에 착석한 사람은 엉덩이의 균형을 잡기 위해 지속적이고 반복적으로 자세를 교정하여 신체의 밸런스를 유지하게 된다. 이러한 과정에서 사람의 좌우 방향의 자세를 교정함으로써 궁극적으로 자세 교정의 효과를 높일 수 있게 된다. 결론: 향후, 본 교정용 의자를 사용한 거북목 자세를 가진 사람에 있어서 지속적인 자세교정에 대한 집단연구가 필요하다.

• 재활복지공학회논문지
• /
• 제10권2호
• /
• pp.133-139
• /
• 2016

전동휠체어는 장애인들이 편리하게 이동할 수 있는 이동수단이다. 하지만 전동휠체어를 사용하다가 전복되는 사고가 매년 증가하고 있다. 현재 전동휠체어 관련한 KS P 7176 규격에는 동적안전성 시험항목이 있지만 이는 전동휠체어의 안전성을 확보하지 못하였다. 본 연구에서는 새롭게 개발한 장애인 차량에 적재 가능한 접이식 전동휠체어를 소개하고 본 휠체어를 기본으로 주행 중 동적 전도해석 기법에 관한 내용을 소개하고자 한다. 전도해석은 force-moment 안정성 측정법을 사용하였으며 회전반경, 가속도, 무게중심점에 대한 영향을 평가하였다. 본 해석 방법으로 전동휠체어의 안정성을 확보할 수 있으며 동적 안정성 평가 항목 개발에 기초자료로 제공할 수 있다.

• 한국자동차공학회논문집
• /
• 제20권5호
• /
• pp.53-64
• /
• 2012

Deep and narrow welds can be produced by laser welding at high welding speeds with a narrow heat-affected zone (HAZ) and little distortion of the workpiece. This study aims to evaluate the usefulness of laser welding at automobile component manufacture. Microstructure observation, hardness test, tensile test and fatigue life test are performed by using the fiber laser welded SPFC590 steel sheets which is used widely in the manufacture of automotive seat frame. Three kinds of specimens are only a SPFC590 steel plate, quasi-butt joint plate and lap joint plate by laser welding. The following results that will be helpful to understand the static strength, fatigue crack initiation and growth mechanism were obtained. (1) The tensile strength of quasi butt joint specimens nearly equal to base metal specimens, but lap joint specimens fractured in shear area of weld metal. (2) The fatigue strength of quasi-butt joint specimen was approximately 8 percent lower than that of the base metal specimens. Furthermore, the lap joint specimens were less than 86 percent of the base metal specimens. (3) The lap joint fatigue specimens fractured at shear area in high level stress amplitude, while fractured at normal area in low level stress amplitude. From these results, the applicability of the laser welding to the automobile component is discussed.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2009년 추계학술발표대회
• /
• pp.64-64
• /
• 2009

The use of ultra high strength steels (UTSS) is a natural result with increasing the demands for the lightweight materials and developing an innovative steel technology. Recently it has been used a 1500MPa grade hot stamping steel as automobile bodies, reinforcement parts, and seat frame parts in the automotive industry. It is a quenchenable steel manufactured by hot stamping process. It is well known that UTSS welding has softening in the heat affected zone(HAZ). Because welding is a sort of process applying heat, it should change the heat treated features and degrade the strength. This study was performed to investigate the influence of the heat input on the softening of the HAZ in the GMAW process. Each experiment was compared with that in the conditions having a different current and voltage at a same heat input. In order to analysis characteristics of the HAZ, optical microscope was used to observe microstructure and vickers hardness tests were carried out across the welds. Applying low heat input means a fast cooling rate. It leads to high hardness in the HAZ. It is found that characteristics of the HAZ are determined by microstructure obtained by different cooling rate.

• 한국항해항만학회지
• /
• 제27권1호
• /
• pp.63-70
• /
• 2003

초대형 부유식 구조무？ 상부구조는 육상 구조물과는 달리 파량하중의 영향을 받기 때문에 하부부체의 변형에 의해서 상부구조물에는 부가 모멘트가 크게 발생한다. 이와 같은 부가모멘트의 저감을 위하여 보-기둥 접합부에 반강접의 도입에 관한 연구는 시작단계이며 반강접의 비선형 거동을 고려한 상부구조물의 연구는 초기단계이다. 본 논문에서는 초대형 부유식 구조물의 상부구조물에 정적하중과 진폭의 크기가 다른 파랑하중이 동시에 작용할 경우 강접 골조와 부분적으로 반강접 접합부가 사용된 세 가지 접합부 종류에 대한 2차 탄성해석을 수행하였다. 접합부는 웨브에 더블 앵글을 가진 상하 앵글(TSD) 접합과 확장 엔드 플레이트 접합 그리고 각형강관 외다이아프램 접합부를 적용하였으며 중고층 구조물에 파랑하중이 작용할 경우 반강접 접합부의 위치에 따른 모멘트와 수평변위의 응답특성에 대하여 연구하였다.

• Structural Engineering and Mechanics
• /
• 제39권1호
• /
• pp.125-145
• /
• 2011

Pushover analysis has gained significant popularity as an analytical tool for realistic determination of the inelastic behaviour of RC structures. Though significant work has been done to evaluate the demands realistically, the evaluation of capacity and realistic failure modes has taken a back seat. In order to throw light on the inelastic behaviour and capacity evaluation for the RC framed structures, a 3D Reinforced concrete frame structure was tested under monotonically increasing lateral pushover loads, in a parabolic pattern, till failure. The structure consisted of three storeys and had 2 bays along the two orthogonal directions. The structure was gradually pushed in small increments of load and the corresponding displacements were monitored continuously, leading to a pushover curve for the structure as a result of the test along with other relevant information such as strains on reinforcement bars at critical locations, failure modes etc. The major failure modes were observed as flexural failure of beams and columns, torsional failure of transverse beams and joint shear failure. The analysis of the structure was by considering all these failure modes. In order to have a comparison, the analysis was performed as three different cases. In one case, only the flexural hinges were modelled for critical locations in beams and columns; in second the torsional hinges for transverse beams were included in the analysis and in the third case, joint shear hinges were also included in the analysis. It is shown that modelling and capturing all the failure modes is practically possible and such an analysis can provide the realistic insight into the behaviour of the structure.

• 한국지역지리학회지
• /
• 제17권1호
• /
• pp.40-57
• /
• 2011

山圖(산도)는 풍수지리적 길지, 즉 혈(穴)과 명당의 국면을 표현한 지도이다. 산도는 가정 이상적이라고 생각하고 관찰한 자연지형을 풍수지리적 공간모형에 빗대어 표현한 것이다. 본 연구는 국립중앙도서관과 서울대학교 규장각한국학연구원에 소장된 족보 중 "기계유씨족보(杞溪兪氏族譜)"와 "반남박씨세보(潘南朴氏世譜)"에 게재된 2개의 산도를 연구 대상으로 하여 족보(族譜)에 게재된 산도의 제작기법, 지형표현의 특징을 산도의 구도, 시점, 중심지향적 지도, 물의 흐름, 산론 등의 세부항목을 중심으로 살펴보았다. 연구 결과는 다음과 같다. 연구 대상 산도는 이원적 축척과 부감법을 사용하였으며 묘지를 중심으로 지형을 묘사하고 중요지형을 실제 지형보다 과장해서 표현하였다. 또한 묘지에서 관찰되지 않는 중요지형은 시점이동을 통해 관찰하고 이를 세밀하게 표현하였다. 산론(山論) 부분에는 지리적 위치와 산맥의 흐름과 체계, 풍수적 특징, 묘지의 좌향과 주변지형을 설명하는 내용이 주를 이루고 있었다.

• Journal of Biosystems Engineering
• /
• 제33권4호
• /
• pp.224-229
• /
• 2008

This study was aimed to minimize the impact force and vibration transmitted to the transporting materials from the trailer and wheel shaft by installing the leaf spring suspension device at the space between the wheel shaft and frame of power tiller trailer. The developed trailer equipped with leaf spring suspension device was compared to the existing trailer without suspension device, in order to identify the vibration absorption effect of the leaf spring. The results of this study could be summarized as follows; (1) The length and the maximum bending amount of the leaf spring were designed as 1,000 mm and 42 mm, respectively, considering the possible space for installing at below the trailer. When 4 leaf springs were installed on both wheel shafts, the allowable maximum load was identified as 9,418 N. (2) The average vibration accelerations for the frequency less than 20 Hz, where the severe transporting loss could be represented, were $0.017\;m/s^2$ and $0.133\;m/s^2$ for the developed and the existing trailer, respectively, showing the vibration absorption effect of about 87%. And the average vibration accelerations on the driver's seat for the frequency less than 20 Hz were $0.01\;m/s^2$ and $0.20\;m/s^2$ for the developed and the existing trailer, respectively, which showed the similar vibration absorption effect. (3) The change of the average vibration accelerations for the frequency from 20 Hz to 80 Hz showed the similar tendency with the result for the frequency less than 20 Hz, but the effect for developed trailer was reduced slightly. And the effect of vibration absorption for the above 80 Hz was reduced highly. However, by installing the leaf spring suspension device at the trailer, the low frequency below 40 Hz, which could affect on transporting loss severely, could be reduced highly. (4) The maximum vibration acceleration for the frequency less than 20 Hz were $0.027\;m/s^2$ and $1.267\;m/s^2$ for the developed and the existing trailer, respectively. And the change of maximum acceleration between 20 Hz and 120 Hz was showed similar tendency with the result for the frequency less than 20 Hz, but the width of change was reduced highly.