• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.3
• /
• pp.91-100
• /
• 2004

This study presents the development of a new aluminum seat frame for the commercial bus. Back moment and seat belt anchorage analysis of the conventional steel seat frame was conducted as a base model. Effective aluminum section dimensions for aluminum pipe were calculated from equivalent stiffness and equivalent weight study. Back moment and seat belt anchorage strength with the developed aluminum seat frame were compared to those of the base model. Additionally, to pass the fatigue test, shape modification of side frame assembly was conducted. From this study we could reduce the weight of seat frame more than 5 kg. And the current analysis model and procedure can provide useful informations in designing a new commercial car seat and can reduce the overall design cost and time.

• Journal of Korean Society of Transportation
• /
• v.21 no.2
• /
• pp.7-16
• /
• 2003

To minimize the death and injury by a collision, the installation of an air bag is recommended as a mandatory practice together with the wearing of the seat belt. By using simulated collision experiments, this research focused on the effect of an air bag and seat belt on the driver safety. The vehicle deceleration characteristics were obtained from impact experiment. LSDYNA, a software program for vehicle collision analysis, and MADYMO. a software program for driver motion after collision, were used for simulated experiment. Four cases such as air bag installed and seat belt wearing (case A), air bag installed but seat belt not wearing (case B), air bag not installed but seat belt wearing (case C), air bag not installed and seat belt not wearing (case D) were analyzed. The impact of acceleration on the injury of driver's head was analyzed by Head Injury Criterion (HIC) as well. It was found that having air bag and wearing seat belt effectively reduced driver's head injury about 52.9% to 70.5% compared with the case of having neither air bag nor wearing seat belt.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.3 s.234
• /
• pp.395-402
• /
• 2005

Recently Multidisciplinary Design Optimization Based on Independent Subspaces (MDOIS), an MDO (multidisciplinary design optimization) algorithm, has been proposed. In this research, an MDO problem is defined for design of a belt integrated seat considering crashworthiness, and MDOIS is applied to solve the problem. The crash model consists of an airbag, a belt integrated seat (BIS), an energy absorbing steering system, and a safety belt. It is found that the current design problem has two disciplines - structural nonlin- ear analysis and occupant analysis. The interdisciplinary relationship between the disciplines is identified and is addressed in the system analysis step in MDOIS. Interdisciplinary variables are belt load and stiffness of the seat, which are determined in system analysis step. The belt load is passed to the structural analysis subspace and stiffness of the seat back frame to the occupant analysis subspace. Determined design vari- ables in each subspace are passed to the system analysis step. In this way, the design process iterates until the convergence criterion is satisfied. As a result of the design, the weight of the BIS and Head Injury Crite- rion (HIC) of an occupant are reduced with specified constraints satisfied at the same time. Since the system analysis cannot be formulated in an explicit form in the current example, an optimization problem is formu - lated to solve the system analysis. The results from MDOIS are discussed.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.3
• /
• pp.58-66
• /
• 2012

This paper describes a design and a verification of linear state observers for a motorized seat belt system to estimate state information such as angular velocity and load torque. The motorized seat belt system provides functions to protect passengers and improve passenger's convenience. To realize these functions, sensors which can measure an angular velocity and load torque are needed. By use of the linear state observer, state information can be estimated without sensors. The motorized seat belt system is analysed and represented as a state space model which contains load torque as an augmented state. By the developed state space model, a full and reduced order observer are designed and verified by experiments. The full and reduced order observer are also compared from points of view of execution time and noise robustness.

• Journal of the Ergonomics Society of Korea
• /
• v.29 no.1
• /
• pp.73-82
• /
• 2010

The purpose of this study is to understand motion characteristics of older drivers during reaching seat belt compared to young drivers and to provide design guidelines in order to reduce discomfort for the elderly. The whole body kinematics of each subject was captured using 12-camera motion analysis system. Subjective ratings on discomfort levels were obtained simultaneously using a questionnaire. This paper first presents the result of motion characteristics of elderly drivers' reach motion to seat belt. Compared to young drivers, older drivers performed seat belt reach motions less efficiently and moved slower due to mostly the movement error. Older drivers also made use of reduced joint range of motion in cervical left rotation, lumbar left rotation and right shoulder adduction, which can be explained by their reduced active range of motions (AROMs). To compensate for their reduced joint range of motion, older drivers rotated pelvis more.

• Journal of Industrial Technology
• /
• v.26 no.A
• /
• pp.47-54
• /
• 2006

To improve passenger safety, seat belt systems with pre-tensioner that tightens seat belt webbing using explosive just before collision are widely used these days. Even though seatbelt must not unlatched without passengers' operation. explosive power of pre-tensioner can cause unlocking of a buckle. To prevent the unlocking, an anti-g mass that blocks displacement of the release button has been attached to the buckle. In this study, the dynamics and statics of locking mechanism associated with operation of anti-g buckle has been theoretically investigated, and important design variables that affect the operation of anti-g buckle have been identified. Through the total seat belt system's dynamic simulation using force and displacement inputs obtained from seat belt sled test, design of the proposed anti-g buckle has been validated.

• Journal of Information Technology Services
• /
• v.22 no.6
• /
• pp.87-102
• /
• 2023

Existing child car seats do not have a monitoring means for the driver or guardian to effectively recognize the status of whether the seat belt of car seat is fastened and whether the ISOFIX of the car seat is fastened to the inside device of the vehicle. In this paper, we propose a smart car seat system which can monitor in real time, whether the seat belt of a child seated in the car seat is fastened and whether the ISOFIX of the car seat is fastened. The proposed system has been developed with a prototype, in which a Hall sensor, magnet, Bluetooth, and display device are used to detect whether these are fastened and to display the detection results. The prototype system provides the detection results as texts and alarm signal to the display for driver or guardian' smartphone in the car in motion. With functional tests of the prototype system, it was confirmed that the detection functions are properly operated, and the detection results were transmitted to the display device and smartphone via Bluetooth within 0.5 seconds. It is expected that the development system can effectively prevent safety accidents of child car seats.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.6_3
• /
• pp.1173-1182
• /
• 2022

According to the National Fire Agency, there were 61 traffic accidents of Fire engines in 2021. That is an increase of about 80% compared to the previous year. And the number of injuries and deaths increased by more than 300%. According to the survey of this study, less than 25% of firefighters wore seat belts of Fire engines during dispatch, contrary to the rapid increase in injuries and deaths. About the reasons for why firefighters do not wear seat belts, It can be found in aspects that are related to personal consciousness, organizational culture, and firefighting dispatch. The number of dispatches will increase in the future, this is considered to be a serious problem for the stability of the firefighting organization. In this study, a seat belt should be designed newly and proposed to improve the seat belt wearing policy.

• Transportation Technology and Policy
• /
• v.10 no.2
• /
• pp.16-19
• /
• 2013

• Journal of Industrial Technology
• /
• v.28 no.A
• /
• pp.71-74
• /
• 2008

Belt Integrated Seat(BIS) has many advantages compared to the existing seats. Due to the development of materials and manufacturing technology, BIS, which has been used restrictely in the past, has gone through a rapid growth. As a result, its advantages have gained attention and the possibility of replacing the existing seats has grown. The need to develop BIS has risen and presently joint development with associated industries is in progress. For its first goal, the development and research of Recliner sensor has been selected. Recliner sensor is an essential part of the BIS in which the belt is incorporated onto the seat. In seat-belts, there is an inclination sensor which locks the belt according to the angle of a car. Because the inclination sensor can change frequently depending on the back of seat, a device which can enhance the inclination sensor according to the angle of the back of seat. It is the Recliner sensor that play's this role. Studies on Recliner sensor within and outside Korea has not yet made a salient progress, and due to this fact, the joint development has made a start by benchmarking other company's products. Currently, in other to set the course of the development, a research in patents and various other information is being done. In addition, for the purpose of developing a product which will be compatible with the existing products, a prototype will be made and tested before a new product makes its launching on the market.