• 기술사
• /
• 제45권1호
• /
• pp.61-62
• /
• 2012

Realizing that retired scientists and engineers are one of the most important human resources in contributing scientific competitiveness of the country, several policies for supporting utilizing retired scientists and engineers have been developed and performed in support of government for years. Those policies in proper priority will bring the efficient utilization mechanism of retired scientists and engineers to the society with the value and the respect of scientists and engineers at all. So, Utilization of retired scientists and engineers for advancement of Technology(Reseat programme) were summarized.

• 산업기술연구
• /
• 제26권A호
• /
• pp.55-61
• /
• 2006

Motorized retractors enhance the safety of passengers by removing the slack of webbing and by holding upright driving position. Reliability of a driving mechanism that includes one-way clutch between the driving motor and webbing is directly linked to the safety of passenger. In this research, conditions for locking one-way clutch, and also conditions for sustaining locking are theoretically investigated. The operation of a motorized retractor under realistic conditions is simulated in order to validate the proposed retractor design.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.346-349
• /
• 2001

Nowadays the amount of plastic products is increasing in modern industry. Plastic materials are continuously developed to satisfy the mechanical, physical, and chemical properties. The increasing application of plastic parts in automobile and aerospace industries is due to the fact that it can reduce the structural weight and can lessen the environmental contamination. Among many manufacturing technologies for plastic parts, the injection molding process is very attractive because of its low cost and short production time. Through various analyses of resin flow and molding process for the conventional gate and cooling mechanism, a new type of mold was designed which had different gate location and cooling systems. Newly designed ball seat has an excellent performances, i.e. diminished weld-line, residual stress density, higher magnitude less crack propagation and smaller dimensional contractions effect.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.397-398
• /
• 2006

In late years, from a trend for ecology of auto motive engine, low emission and low fuel consumption of engine become a social assignment. At the same time, the high output (high efficiency) is required, too. In order to meet those requirements, in comparison with conventional engines, lean A/F (Air fuel ratio) setting is becoming popular for the high performance engines of late years. Exhaust valve seat (sintered material) used in these engines has a problem in wear resistance, because it is exposed to the surroundings that is clean and a high temperature in comparison with the conventional engines. Therefore, wear mechanism with lean A/F of engine was analyzed.The exhaust valve seat (sintered material), that was superior in wear resistance, was developed.

• 한국정밀공학회지
• /
• 제21권5호
• /
• pp.182-187
• /
• 2004

In an aging society, the mobility and the accessibility are considered sincerely for the elderly and the handicapped person. The slide-up seat system, which helps board and disembark a car via electric power was developed for the elderly, the handicapped and the families who accompany them. In this paper, critical factors and methods to design the mechanism and controller for safety and comfortableness are suggested. The performance of the system including linkage, electrical, and electronic parts was improved by changing the detail design and some parts after durability test for them.

• Steel and Composite Structures
• /
• 제39권4호
• /
• pp.383-399
• /
• 2021

In the study, three 1:3-scale unequal span steel-concrete composite substructures with top-seat angle and double web angle connection were designed and identified as specimens GTSDWA-0.6, GTSDWA-1.0, and GTSDWA-1.4. Pseudo-static tests and refined numerical model analysis were conducted to examine the anti-progressive collapse performance of a semi-rigid steel-concrete composite substructure. The results indicated that the failure modes of the three specimens revealed that the fracture occurred in the root of the long leg of the top/seat angle in tension at the connection. With increases in the span ratio of the left and right composite beams, the bearing capacities of the composite substructures decreased, and the corresponding displacement increased. With respect to GTSDWA-0.6 and GTSDWA-1.4, the resistance due to the short composite beam corresponded to 62% and 60%, respectively, and the total resistance provided by the short composite beam exceeded that of the long composite beam. With respect to GTSDWA-1.0, the resistance due to the left and right composite beams was similar. All three specimens underwent the flexure mechanism and flexure-axial mixed mechanism stages. They resisted the external load mainly via the flexure mechanism. Moreover, the addition of stiffeners on both sides of the top and seat angles is advantageous in terms of improving the collapse resistance and ductility of unequal span composite substructures.

• 한국자동차공학회논문집
• /
• 제15권4호
• /
• pp.101-107
• /
• 2007

This study investigated the wear of the valve and seat insert seating faces. A tester, an exhaust valve and a seat insert were used. Test variables were cycle numbers ($2{\times}10^6,\;4{\times}10^6,\;6{\times}10^6\;and\;8{\times}10^6$) and Hz (10Hz and 25Hz). The other test conditions such as temperature ($350^{\circ}C$), fuel (LPG) and load (1960N) were fixed. The 10Hz tests indicated that the average Rmax of the valve increased at the rate of $7.76{\mu}m/10^6$ cycles starting from $29.42{\mu}m$ at the $2{\times}10^6$ cycles and that of the seat insert increased at the rate of $8.57{\mu}m/10^6$ cycles starting from $34.19{\mu}m$ at the $2{\times}10^6$ cycles. The 25Hz tests indicated that the average Rmax of the valve increased at the rate of $1.58{\mu}m/10^6$ cycles starting from $74.2{\mu}m$ at the $2{\times}10^6$ cycles and that of the seat insert increased at the rate of $1.25{\mu}m/10^6$ cycles starting from $83.95{\mu}m$ at the $2{\times}10^6$ cycles. The tribochemical reaction product covered the two seating faces, preventing the wear of the seating faces. As cycle numbers became greater, the average Rmax of the seating faces became greater, but the increase rate varied significantly depending on the Hz. The wear mechanism of the two faces was investigated through the tribochemical reaction.

• 문화기술의 융합
• /
• 제10권1호
• /
• pp.459-464
• /
• 2024

본 연구는 화장실 변기 사용 과정 중 일어나는 노인 낙상사고를 예방하기 위한 변기 리프팅 시트 설계를 목적으로 한다. 설계에 앞서 화장실 사용과 관련된 규정과 법률 및 국가표준을 통해 보조 기구 설치 가능 공간을 결정하였으며, 고령자의 신체 치수 및 작동 범위를 고려하여 사용자가 외부의 도움 없이 더욱 안전하고 편리하게 사용할 수 있는 최적화된 변기 시트의 최종 위치를 설정하였다. 또한, 효과적인 기립 보조를 수행할 수 있도록 기구 작동 시 시트 상승과 각도 조절이 동시에 구현되게 복합 4절링크 구조를 적용하였으며 Linkage 프로그램과 UG NX를 이용하여 적절한 링크 형상과 치수를 결정하였다. ANSYS Workbench를 이용한 FEA 해석 및 실제 제작을 통해 기구 작동 과정의 링크 안전성 검증 및 리프팅 시트의 정상 작동 여부를 확인하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 추계학술대회 논문집
• /
• pp.389-390
• /
• 2008

• 대한인간공학회지
• /
• 제33권2호
• /
• pp.155-165
• /
• 2014

Objective: The aim of this study is to develop an office chair enabling to keep working at reclined sitting posture. Background: Sedentary workers are supposed to change the posture frequently during long hours of sitting. A reclined sitting position has been recommended to reduce disc pressure. But slumped sitting posture caused by the buttock sliding forward without any adjustment of back reclining is commonly observed. The worker seems to have tendency to change the sitting posture maintaining working condition. We assumed the reason to be their hands movement away from the working space when tilting backward. Method: Slide mechanism allowing seat to move forward was designed to maintain the hand position in working space during reclining. A prototype was manufactured and tilting motion was analyzed using motion capture system. Four experiment chairs were tested including the manufactured prototype chair and three other commercial chairs. Results: A backward movements of the hand position were 13.0mm, 101.7mm, 156.1mm and 139.3mm at the prototype chair, compared to chair B, chair C and chair D, respectively. And the movement was remarkably small at the prototype chair. Conclusion: The developed seat sliding chair allows back tilting maintaining hand position at working space. We expect the user tilting back more often than normal tilting chair during seated work. But further investigation is required to figure out the effectiveness of the developed chair using prolonged working hours. Application: The developed office chair directly affects commercialization.