• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.850-853
• /
• 2008

In the motorized retractor of the smart seat belt system, anti-overload clutch is a very important element to prevent the excessive belt tensional force. Anti-overload clutch is the essential device to protect drivers from chest damage by the excessive belt tension. It generates slipping motion under excessive webbing moment and the belt tensional force is limited below critical value. In this study, slipping mechanism in the antioverload clutch is investigated by analysis and experiment. On the prototype model, finite element analysis is performed to identify the slipping condition and to determine the critical load. Analysis result is compared with the experimental result and the validity of the analysis model is verified. The purpose of the study is to provide the analytical background for the systematic design of the anti-overload clutch mechanism.

• Journal of Auto-vehicle Safety Association
• /
• v.3 no.2
• /
• pp.5-10
• /
• 2011

Under the full frontal crash event, seatbelt system is the most typical and primary restraint device that prevents the second impact between an occupant and vehicle interior parts by limiting the forward motion of an occupant in the vehicle occupant packaging space. Today's restraint systems typically include the three-point seat belt with the pretensioner and the load limiter. A pretensioner preemptively tightens the seat belts removing any slack between a passenger and belt webbing which leads to early restraint of a passenger. After that a load limiter controls level of belt load by releasing the belt webbing to reduce occupant injurys. In this study, load characteristics of load limiters are optimized by the computer simulation with a MADYMO model for a frontal impact against the rigid wall at 56kph and then we suggest performance requirements. We derived optimum load characteristic from the results using four vehicle simulation models represented by the vehicle. Based on the results, we suggest the performance from the results of the second optimization using the simulation considering the design and the standardization. Finally, the performance requirements is verified by the sled tests including the load limiter device for the full vehicle condition.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.6
• /
• pp.590-599
• /
• 2009

In this paper, a method of modeling seat belts on crew seat during dynamic seat testing was studied. The body segments of the occupant were modeled with joints. The joints consisted with various stiffnesses, dampings, and frictions. Three types of seat belt restraint systems were investigated. The analysis for on the injury assessment of helicopter's crew under drop impact was conducted. The effectiveness of the seat belt system for crashworthiness and safety was evaluated. As the results of impact analysis, head, neck and spine of the crew can be easily damaged in the vertical direction more than the longitudinal direction. Based on the verified model, behavior of human body was studied with three-point restraint systems. The displacement and injury level of the 12-point restraint system was the smallest.

• Journal of Sensor Science and Technology
• /
• v.23 no.2
• /
• pp.142-147
• /
• 2014

Real time driver's respiration monitoring method for detecting driver's drowsiness is investigated. The sensor to obtain driver's respiration signal was a piezoelectric pressure sensor attached at the abdominal region of the seat belt. The resistance of the pressure sensor was changed according to the pressure applied to the seat belt due to the driver's respiration. Monitoring driver's respiration was carried out by driving on the virtual road in a driving simulator from Cheonan to Seoul and monitoring results were compared to the PELCLOS. Experiment results show that the driver's respiration signal can be used for detecting driver's drowsiness.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.3 s.174
• /
• pp.701-709
• /
• 2000

As the welding spot forms a singular geometry of an external crack type, fatigue failure of spot-welded specimens can be evaluated by means of a fracture parameter. Recasting the load vs. fatigue life relationships experimentally obtained, we predicted the fatigue life of spot-weld specimens with a single parameter denoted the equivalent stress intensity factor. This crack driving parameter is demonstrated to successfully describe the effects of specimen geometry and loading type in a comprehensive manner. The suggested fatigue life formula for a single spot weld can play a key role in the design and assessment of spot-welded panel structures, in that the fatigue strength of multi-spots is eventually determined by the fatigue strength of each single spot. We therefore attempt to evaluate the effectiveness and validity of $K_e$ in predicting the fatigue life of auto seat belt anchor panel. We first establish finite element models reflecting the actual mechanical behavior of 3 types of seat belt anchor specimens. Using finite element models elaborately established, we then obtain the effective crack driving parameter $K_e$ composed of its ductility -dependent modal components. It is confirmed that the $K_e$ concept successfully predicts the fatigue life of multi-spot welded panel structures represented by auto seat belt anchors here.

• Journal of Auto-vehicle Safety Association
• /
• v.6 no.1
• /
• pp.22-26
• /
• 2014

Fatality of accidents on curved roads where rollover accidents are likely to take place was higher than that on straight roads. We ought to investigate factors affecting injury severity of occupant in a vehicle rollover accident. From January 2011 to December 2013, we collected data about rollover motor vehicle crash accident. We surveyed occupant's injury, vehicle type, safety devices, type of rollover accident and the number of turn in accident. Of the 132 subjects, 56.1% were males, 50.8% were drivers, 48.5% fastened seat belt, and air bag deployed in 12.1%. Among injuries sustained head, chest and abdomen were major sites of severe injury(Abbreviated injury scale>2). Seat belt use, rollover type, and the number of 1/4 turn were found to have significant positive correlations with Injury Severity Score. The regression analysis herein found significance in safety belt use and the number of 1/4 turn. Seat belt use was a significant factor affecting injury severe of occupant in rollover accident.

• Proceedings of the ESK Conference
• /
• 1997.10a
• /
• pp.398-405
• /
• 1997

과거 8년간의(1985-1992) 통계에 의하면 정면과 측면 충돌시 구속 시스텡의 하나인 Airbag장착 차량의 사망자 및 중상자 수가 현저히 감소하고 있는 것으로 나타나고있다. 그 러나 최근 소비자로 부터의 Airbag에 관한 불만을 보고 받고 있다. 즉 구속효과를 발휘함에 있어 부수적으로 인체 부상을 유발하고 있다는 것이다. 사망내지는 심각한 부상은 방지하고 있으나 경미한 부상은 오히려 증가하고 또한 신체가 적은 여성 운전자나 6세 이하의 어린이 에게는 심각한 부상의 우려가 있다는 것이다. 본 연구에서는 구속시스템의 총아인 Airbag 시스템의 심각한 부수적인 부상 보고를 입증하기 위하여 우리나라 어린이 6세 신체를 기준 으로하여 구속시스템을 착용하지 않았을 경우(실제로 많은 경우), seat belt만 착용시, Airbag만 작용시, 그리고 seat belt와 Airbag을 동시에 사용할 때를 컴퓨터 Simulation Package 이용 신체 dynamic을 모의실험 하였다. 실험결과, 기존에 알려진바와 같이 구속시스템을 사용하지 않았을 경우에 부상은 매우 컸다. 신체 사이즈가 작은 어린이 혹은 여성 운전자의 경우 Seat belt만을 사용한 경우는 Airbag만을 사용한 경우보다는 부상정도가 약간 경미하였으나 두 경우 모두 인체가 구속시스템의 구속 범위를 이탈하여 구속 시스템으로써의 역할을 충분히 하지 못하고 있었다. 특히 Seat belt와 Airbag을 동시에 사용하였을시에도 Airbag이 충분히 개선된 이후라도 신체 사이즈가 작은 경우에는 흉부부위에 의한 충격 흡수가 먼저 이루어지지 못하고, 머리에 먼저 Airbag이 접촉이 되어 충격 흡수 역할보다는 반동효과가 더 커서 머리 및 몸체가 뒤로 Rebound 하는 효과로 머리, 혹은 목의 신체 부상한계를 넘고 있어 큰 부상 내지는 사망에 이르고 있음을 알 수 있었다. 사료된다.의 결과는 자전거 에르고노미터의 결과가 트레드밀의 결과에 87.60%정도 나타났다.음을 관찰하였다. 특히 vitamin C와 E의 병용투여는 상승적으로 적용하여 간세포손상을 더욱 억제시킴을 알 수 있었다.mance and on TFP(Total Factor Productivity) growth which is a pure measure of firm performance. To utilize the advantage of panel data, FEM(Fixed Effect Model) and REM(Random Effect Model) were used. The empirical result shows that the entropy index as a measurement of inter-business relatedness is not significant but technological relatedness index is significant. OLS estimates on pooled data were considerably different from FEM or REM estimates on panel data. By introducing interaction effect among the three variables for business portfolio properties, we obtained three findings. First, only VI (Vertical integration) has a significant positive correlation with ROS. Second, when using TFP growth as an dependent variable, both TR(Technological Relatedness) and f[ are significant and positively rel

• Korean Journal of Health Education and Promotion
• /
• v.20 no.4
• /
• pp.79-93
• /
• 2003

Childhood injuries are the primary cause of death and disability among children aged 5 to 14. Consistent practice of learned safety behaviors can reduce the occurrence of severe injuries among children. However, safety behavior concern is low among Korean-American children specifically and American children, in general. The objective of the study is to evaluate the impact of an unintentional injury prevention curriculum, Risk Watch among Korean-American children. A quasi-experimental design with a nonequivalent control group was used for the designed of the study. Two intervention and two control Korean schools in Atlanta participated in this study. The intervention consisted of weekly lessons in traffic, bicycle, pedestrian, and fire safety. One hundred and two students completed a pre-test and a post-test. The main outcomes were safety behaviors (seat belt use or helmet use), behavioral intentions, and safety knowledge. Analysis of covariance was used for the statistical analyses. Strong intervention effects were found for increasing knowledge of all safety topics in the intervention group. Additionally, statistically significant intervention effects were detected for increasing seat belt and helmet use, as well as behavioral intentions of wearing a seat belt and wearing a helmet, among pre-kindergarten and kindergarten students. For students in grades 1 and 2, intervention effects were found for increasing helmet use. Among students in grades 3 to 8, the intervention group showed statistically significant increases for seat belt use. Limitations of the study and recommendations for modifying and supporting unintentional injury prevention programs for school children are discussed.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.12
• /
• pp.2030-2036
• /
• 2016

This paper presents a hardware development procedure of the ASB(Active Seat Belt) control system to comply with ISO 26262. The ASIL(Automotive Safety Integrity Level) of an ASB system is determined through the HARA(Hazard Analysis and Risk Assessment) and the safety mechanism is applied to meet the reqired ASIL. The hardware architecture of the controller consists of a microcontroller, H-bridge circuits, passive components, and current sensors which are used for the input comparison. The required ASIL for the control systems is shown to be satisfied with the safety mechanism by calculation of the SPFM(Single Point Fault Metric) and the LFM(Latent Fault Metric) for the design circuits.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.11
• /
• pp.7329-7334
• /
• 2015

This is to analyze of driver behavioral and the accident characteristics in rollover. The study period was January 2011 to May 2014 and the subject of study was 102 person who were drivers visited the emergency room. Research tool includes a damage information of the vehicle, accident mechanism, damage to the patient clinical information with the injury data from the ROAD Traffic Authority. For data analysis, SPSS 18.0 was used for t-test, ANOVA and Chi-square test. Injury Severity Score average score according to the vehicle type is 6.00 points in the smaller vehicle, at high vehicle 11.78 points, from the other vehicle that showed 14.70 points. Significant differences between the three groups did not show (P=.267). Men did not use a seat belt significantly compared to women(P=.007). Vehicle type and weather, this was no correlation with whether or not use the seat belt(P=.755, P=.793). But showed a tendency to smaller size vehicles drivers do not use a seat belt, the weather could see a little more inclined to use a seat belt rather than a sunny day. Finally, in rollover accidents as in other types of accident it was confirmed that the seat belt has a great influence on the damage.