• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.46 no.3
• /
• pp.268-274
• /
• 2023

Image mosaicking is one of the basic and important technologies in the field of application using images. The key of image mosaicking is to extract seamlines from a joint image. The method proposed in this paper for image mosaicking is as follows. The feature points of the images to be joined are extracted and the joining form between the two images is identified. A reference position for detection the seamlines were selected according to the joint form, and an image pyramid was created for efficient image processing. The outlines of the image including buildings and roads are extracted from the overlapping area with low resolution, and the seamlines are determined by considering the components of the outlines. Based on this, the seamlines in the high-resolution image was re-searched and finally the seamline for image mosaicking was determined. In addition, in order to minimize color distortion of the image with the determined seamline, a method of improving the quality of the mosaic image by fine correction of the mosaic area was applied. It was confirmed that the quality of the seamline extraction results applying the method proposed was reasonable.

• Korean Journal of Remote Sensing
• /
• v.36 no.6_2
• /
• pp.1537-1549
• /
• 2020

The ground sample distance of KOMPSAT-3 is 0.7 m for panchromatic band, 2.8 m for multi-spectral band, and the swath width of KOMPSAT-3 is 16 km. Therefore, an image of an area wider than the swath width (16 km) cannot be acquired with a single scanning. Thus, after scanning multiple areas in units of swath width, the acquired images should be made into one image. At this time, the necessary algorithm is called image mosaicking or image stitching, and is used for cartography. Mosaic algorithm generally consists of the following 4 steps: (1) Feature extraction and matching, (2) Radiometric balancing, (3) Seamline estimation, and (4) Image blending. In this paper, we have studied an effective seamline estimation method for satellite images. As a result, we can estimate the seamline more accurately than the existing method, and the heterogeneity of the mosaiced images was minimized.

• Korean Journal of Remote Sensing
• /
• v.31 no.5
• /
• pp.395-408
• /
• 2015

High-resolution satellite image mosaics are becoming increasingly important in the field of remote sensing image analysis as an essential image processing to create a large image constructed from several smaller images. In this paper, we present an automatic seamline extraction technique and the procedure to generate a mosaic image by this technique. For more effective seamline extraction in the overlap region of adjacent images, an NDVI-based seamline extraction technique is developed, which takes advantage of the computational time and memory. The Normalized Difference Vegetation Index(NDVI) is an index of plant "greeness" or photosynthetic activity that is employed to extract the initial seamline. The NDVI can divide into manmade region and natural region. The cost image is obtained by the canny edge detector and the buffering technique is used to extract the ranging cost image. The seamline is extracted by applying the Dijkstra algorithm to a cost image generated through the labeling process of the extracted edge information. Histogram matching is also conducted to alleviate radiometric distortion between adjacent images acquired at different time. In the experimental results using the KOMPSAT-2/3 satellite imagery, it is confirmed that the proposed method greatly reduces the visual discontinuity caused by geometric difference of adjacent images and the computation time.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.6
• /
• pp.483-497
• /
• 2018

Image mosaicking, which combines several images into one image, is effective for analyzing images and important in various fields of spatial information such as a continuous image map. The crucial processes of the image mosaicking are optimal seamline determination and color correction of mosaicked images. In this study, the overlap regions were determined by SURF (Speeded Up Robust Features) for image matching. Based on the characteristics of the edges extracted by Canny filter, seamline candidates were selected from classified edges with their characteristics, and the edges were connected by using Dijkstra algorithm. In particular, anisotropic filter and image pyramid were applied to extract reliable seamlines. In addition, it was possible to determine seamlines effectively and efficiently by utilizing building and road layers from digital maps. Finally, histogram matching and seamline feathering were performed to improve visual quality of the mosaicked images.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.1
• /
• pp.61-69
• /
• 2009

By the advent of the high resolution satellite imagery, a ground-coverage included by a single satellite image is decreased. By the reason, there are increasing needs in image mosaicking technology to use images to various GIS fields. This paper describes an edge-based seamline extraction algorithm using edge information such as rivers, roads, buildings for image mosaicking. For this, we developed a method to track and link discontinuous edges extracted by edge detection operator. To estimate the effectiveness of the proposed algorithm, we applied the algorithm to IKONOS, KOMPSAT-1 and SPOT-5 satellite images. The experimental results showed that the algorithm successfully dealts with discontinuities caused by geometric differences in two images.

• Journal of the Korean Society for Heat Treatment
• /
• v.36 no.3
• /
• pp.153-160
• /
• 2023

The use of biogas is an industrially necessary means to achieve resource circulation. However, since biogas obtained from waste frequently causes corrosion in pipes, it is important to elucidate corrosion mechanisms of the pipes used for biogas transportation. Recently, corrosion failure occurred in a pipe which supplied for the biogas at the speed of 12.5 m/s. Pinholes and pits were found in a straight line along the seamline of the pipe. By using corrosion-damaged samples, residual thickness, microstructure, and composition of oxide film and inclusion were examined to analyze the cause of the failure. It was revealed that the thickness reduction of biogas pipe was ~0.11 mm per year. A thin sulfuric acid film was formed on the surface of the interior of a pipe due to moisture and hydrogen sulfide contained in a biogas. Near the seamline, microstructure was heterogeneous and manganese sulfide (MnS) was found. Pits were generated by micro-galvanic corrosion between the manganese sulfide and the matrix in the interior of the pipe along the seamline. In addition, microcracks formed along the grain boundaries beneath the pits revealed that hydrogen-induced cracking (HIC) also contributed to accelerating the pitting corrosion.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.13 no.3 s.31
• /
• pp.268-285
• /
• 1989

The purpose of this thesis is to understand the concrete forms of the traditional Chinese trousers and finally to compare the forms and cuts of the Chinese, Japanese and Korean trousers, which shared the same form in the beginning. The literature survey helps to draw the following conclusions: 1. The first trousers of ancient China were adapted from the nomadic people of the North Asia. 2. The ancient Chinese had both forms of trousers consited of(a) I-letter typed crotch line and (b)$\lambda$-letter typed crotch-line. 3. The folk trousers of China consist mainly of $\lambda$-letter typed seamline which is the trouser form shared among some of the North-Eastern Asiatic people. 4. The open trousers are worn over the closed crotch trousers. 5. The open crotch trousers seems to be developed from the leggings of the nomadic people.

• Journal of Broadcast Engineering
• /
• v.24 no.6
• /
• pp.992-1001
• /
• 2019

In many applications, images acquired from multiple cameras are stitched to form an image with a wide viewing angle. We propose a method of estimating a seam line using motion information to stitch multiple images without distortion of the moving object. Existing seam estimation techniques usually utilize an energy function based on image gradient information and parallax. In this paper, we propose a seam estimation technique that prevents distortion of moving object by adding temporal motion information, which is calculated from the gradient information of each frame. We also propose a measure to quantify the distortion level of stitched images and to verify the performance differences between the existing and proposed methods.

• Korean Journal of Remote Sensing
• /
• v.20 no.2
• /
• pp.125-137
• /
• 2004

In case of using image sequence taken from a moving camera along a road in an urban area, general video mosaicing technique based on a single baseline cannot create 2-D image mosaics. To solve the drawback, this paper proposed a new image mosaicing technique through 3-D multi-baselines that can create image mosaics in 3-D space. The core of the proposed method is that each image frame has a dependent baseline, an equation of first order, calculated by using ground control point (GCP) of optical flows. The proposed algorithm consists of 4 steps: calculation of optical flows using hierarchical strategy, calculation of camera exterior orientation, determination of multi-baselines, and seamless image mosaics. This paper realized and showed the proposed algorithm that can create efficient image mosaics in 3-D space from real image sequence.