• International Journal of Korean Welding Society
• /
• v.1 no.1
• /
• pp.13-16
• /
• 2001

High speed seam weldability of tin coated steels was investigated. Welding was performed by the laboratory wire seam welder that was equipped with process monitoring system Test results showed that increase in applied current and pressure reduced the total resistance across the welding electrodes. Lower and upper limits of welding current increased as the sheet thickness increased, while the acceptable welding condition range decreased. However, extremely low electrode pressure produced unstable welding condition range. The results also demonstrated that slower welding speeds widened the optimum welding heat input range.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.464-466
• /
• 2003

In this paper an advanced algorithm for selecting a seam line automatically, which used to be selected by human operator for mosaicked images is presented. In addition to four factors proposed by automation theory, the FOM(Figure Of Merit) of tie point were taken into account to suggest the method to select a seam line applicatively and the algorithm was applied to mosaic test images.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2003.05a
• /
• pp.34-39
• /
• 2003

Seam seal welding on the semi-conductor package is a process for sealing the packages of semiconductors, crystal parts, saw filters, oscillators with lid plate by seam welding. This paper present the development process of automatic seam seal welding system. In this process, the process algorithm, high precision welding current control, design of welding head, high speed and high precision feeding mechanism, user interface process control program technologies are included.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.11
• /
• pp.77-86
• /
• 2013

In this paper, we propose a fast video retargeting method which preserves the contents of a video and converts the image size. Since the conventional Seam Carving which is the well-known content-aware image retargeting technique uses the dynamic programming method, the repetitive update procedure of the accumulation energy is absolutely needed to obtain seam. The energy update procedure cannot avoid the processing time delay because of many operations by the image full-searching. By applying the proposed method, frames which have similar features in video are classified into a scene, and the first frame of a scene is resized by the modified Seam Carving where multiple seams are extracted from candidate seams to reduce the repetitive update procedure. After resizing the first frame of a scene, all continuous frames of the same scene are resized with reference to the seam information stored in the previous frame without the calculation of the accumulation energy. Therefore, although the fast processing is possible with reducing complexity and without analyzing all frames of scene, the quality of an image can be analogously maintained with an existing method. The experimental results show that the proposed method can preserve the contents of an image and can be practically applied to retarget the image on real time.

• Journal of Broadcast Engineering
• /
• v.23 no.5
• /
• pp.656-668
• /
• 2018

VR (Virtual Reality) is one of the important research topics in the field of multimedia application system. The quality of the visual data composed from multiple pictures depends on the performance of stitching technique. The stitching module consists of feature extraction, mapping of those, warping, seam finding, and blending. In this paper, we proposed a preprocessing scheme to provide the efficient mask for seam finder. Incorporating of the proposed mask removes the distortion, such as ghost and blurring, in the stitched image. The simulation results show that the proposed algorithm outperforms other conventional techniques in the respect of the subjective quality and the computational complexity.

• Earthquakes and Structures
• /
• v.17 no.6
• /
• pp.611-621
• /
• 2019

Precast concrete structure has many advantages, but the assembled seam will affect potentially the overall seismic performance of structure. Based on the sidewall joint located in the bottom of assembled monolithic subway station, the main objectives of this study are, on one hand to present an experimental campaign on the seismic behavior of precast sidewall joint (PWJ) and cast-in-place sidewall joint (CWJ) subjected to low-cycle repeated loading, and on the other hand to explore the effect of shape and position of assembled seam on load carrying capacity and crack width of precast sidewall joint. Two full-scale specimens were designed and tested. The important index of failure pattern, loading carrying capacity, deformation performance and crack width were evaluated and compared. Based on the test results, a series of different height and variably-shape of assembled seam of precast sidewall joint were considered. The test and numerical investigations indicate that, (1) the carrying capacity and deformation capacity of precast sidewall and cast-in-place sidewall were very similar, but the crack failure pattern, bending deformation and shearing deformation in the plastic hinge zone were different obviously; (2) the influence of the assembled seam should be considered when precast underground structures located in the aquifer water-bearing stratum; (3) the optimal assembled seam shape and position can be suggested for the design of precast underground concrete structures according to the analysis results.

• IEIE Transactions on Smart Processing and Computing
• /
• v.5 no.1
• /
• pp.1-4
• /
• 2016

In this paper, we present an algorithm for adjusting the position of a user-specified object considering image aesthetics. Specifically, the user-specified object is positioned according to the rule of thirds by inserting or deleting unimportant seam lines from the image. To find such seam lines, a novel weight map is designed using the spatial and color distances from the object. We also design and analyze two approaches to seam carving and insertion. Experimental results show that the proposed method can be used as an effective semi-automatic image recomposition scheme.

• Journal of Welding and Joining
• /
• v.13 no.4
• /
• pp.65-74
• /
• 1995

The weld seam tracking sensor is indispensable to improve the flexibility of automatic arc welding systems. Among the position sensing methods available, a laser displacement sensor is one of the most prevailing methods. In this study, a laser displacement sensor was examined on detecting the weld seam of lap joints in sheet metal arc welding. The output signal of the laser displacement sensor may ontain severe fluctuation from the effect of arc light, spatters, fume, etc. So a variety of signal processing methods was applied to smooth the output signal of the sensor. And then the weld joint was determined by using the central difference method. It was revealed that the quadratic mean method plays an important role in detecting the weld seam during welding especially.

• Journal of Industrial Technology
• /
• v.28 no.B
• /
• pp.129-133
• /
• 2008

A method to reduce seam line artifact in spatial compounding of ultrasonic images is presented. Spatial compounding is a speckle reducing imaging technique in which a number of ultrasound images of a given target that have been obtained from multiple view angles are combined into a single compounded image by combining the data received from each data point in the compounded image. Since different view angle results in different view area, and the images of different view arms are combined into an image, the compounded image consists of regions with different signal to noise ratio, and the boundary lines between these regions are visible as seam lines in the compounded images. In this paper, we present an algorithm that reduces the visibility of this seam line in the spatially compounded images. Design procedure for a FIH filter is described and the results of applying the filter to in-vivo ultrasonic images are analyzed.

• Journal of Welding and Joining
• /
• v.14 no.4
• /
• pp.79-88
• /
• 1996

For improvement in productivity and weld quality, weld seam tracking and welding parameter control are very essential in the welding of a structure which can not be cxactly fit-up due to mismatch, discontinous gap, deflection, etc.. In this study, an automatic weld seam tracking system is developed for I-butt joint structure, and the system consists of XYZ working table, vision sensor and user interface program. In the developed vision sensor system, an image projection algorithm for weld-line detection and an adaptive current control algorithm for gap variation were implemented. The user interface program developed in this study by basing on the objct oriented concept could provide very convenient way to utilize the tracking system with the pull-down menu driven structure. The developed system showed a good seam tracking and weld quality control capability corresponding to deflected weld lines and gap variations.