• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.4
• /
• pp.367-372
• /
• 2006

A carbon nanotube field emission display(CNT FED) panel with a 2 inch diagonal size was fabricated using a screen printing of a prepared photo-sensitive CNT paste and vacuum in-line sealing technology. After a surface treatment of the patterned CNT, only the carbon nanotube tips are uniformly exposed on the surface. The diameter of the exposed CNTs are usually about 20 nm. Using the photo-sensitive CNT paste, we have developed a triode type CNT FEA with a self-aligned gate-emitter structure. The turn on voltage was around 100 V which corresponds to according the turn on field of about $40V/{\mu}m$. By the creation of a self-aligned gate-emitter structure, it is expected that the screen printed photo-sensitive CNT paste is promising as a good candidate for the large size field emission display.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1998.04a
• /
• pp.149-158
• /
• 1998

The thermal deformation of the contact seal components has been analyzed using the finite element method. The temperature distributions, the thermal deformations and contact stresses are solved numerically for the contact surface with wear coning effects. The thermal deformation is always shown to distort the sealing surface along the radius of the seal ring. The results show that the deformations of inner radius side are significant compared with those of outer radius. Thus, the thermal deformation due to thermal heatings may promote the coned face wear or wear related thermal cracks at the contacting face of the seal ring component.

• International Journal of Control, Automation, and Systems
• /
• v.5 no.1
• /
• pp.35-42
• /
• 2007

This paper presents an INS(Inertial Navigation System) grade, surface micro-machined differential resonant accelerometer(DRXL) manufactured by an epitaxially grown thick poly silicon process. The proposed DRXL system generates a differential digital output upon an applied acceleration, in which frequency transition is measured due to gap dependent electrical stiffness change. To facilitate the resonance dynamics of the electromechanical system, the micromachined DRXL device is packaged by using the wafer level vacuum sealing process. To test the DRXL performance, a nonlinear self-oscillation loop is designed based on the extended describing function technique. The oscillation loop is implemented using discrete electronic elements including precision charge amplifier and hard feedback nonlinearity. The performance test of the DRXL system shows that the sensitivity of the accelerometer is 24 Hz/g and its long term bias stability is about 2 mg($1{\sigma}$) with dynamic range of ${\sigma}70g$.

• International Journal of Precision Engineering and Manufacturing
• /
• v.5 no.3
• /
• pp.5-10
• /
• 2004

Electric contacts serve the purpose of transmitting electric signals across two conducting components. In this paper, the effects of contact conditions such as surface roughness, oxidation, and contamination were investigated with respect to electrical resistance variation of a connector in a direct current circuit. Such change in the electrical resistance is particularly important for low power circuits. The experimental results showed that compared with the effects of contact surface scratch or oxidation, the effect of contamination on the resistance variation was the most significant. In order to minimize failure due to electrical resistance change at the contact region, proper sealing to prevent contamination from entering the interface is needed.

• KSTLE International Journal
• /
• v.9 no.1_2
• /
• pp.26-30
• /
• 2008

This study examined the surface modification characteristics of NBR using sealing in automobile. Surfaces of NBR were modified by RF power Ar plasma treatment. In experiment, pressure, flux, temperature were fixed and RF bias voltage. Treatment time was changed. In friction test, we used PTFE grease. After modification, surfaces of NBR showed many grooves, hydrophilic functional groups, and lipophilic functional groups. As increasing treating voltage and time, the amount of them was increased. And wetting angle and friction coefficient was decreased with increasing treating voltage and time. However, the pattern of changing friction coefficient was not fixed.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.186-186
• /
• 2015

본 연구에서는 플라즈마 전해산화 처리된 AZ31 마그네슘 합금의 내식성에 봉공처리가 미치는 영향에 대해 알아보았다. 플라즈마 전해산화 공정에 의해 형성된 피막에 대하여 증류수 및 알칼리 수용액에서 봉공처리를 실시하였으며, 개회로 전위 측정, 동 전위 분극실험 및 염수분무실험을 통해 내식성을 평가하였다. 실험 결과 증류수 및 알칼리 수용액에서 모두 봉공처리를 함에 따라 내식성이 향상되었으며, 봉공처리 시간을 증가시킴으로써 AZ31 마그네슘 합금의 내식성을 크게 향상 시킬 수 있었다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2007.04a
• /
• pp.259-264
• /
• 2007

In this paper, to analyze the initial valued non-homogeneous elastic half space by the scaled boundary analysis, the infinite element approach was introduced. The free surface of the initial valued non-homogeneous elastic half space was mode1ed as a circumferential direction of boundary scaled boundary coordinate. The infinite element was used to represent the infinite length of the free surface. The initial value of material property(elastic modulus) was considered by the combination of the position of the sealing center and the power function of the radial direction. By use of the mapping type infinite element, the consistent e1ements formulation could be available. The performance and the feasibility of proposed approach are examined by two numerical examples.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.493-494
• /
• 2008

During the last years hollow core insulators started their success story in the field of high voltage engineering for electrical apparatus, substituting porcelain insulators. The termination, also named top and bottom fittings are used for the connection to the rest of the electrical apparatus. The top and bottom flange are attached to the composite to transmit mechanical load and also ensure the gas tightness. They are bonded by epoxy glue with a glass transition temperature of about $130^{\circ}C$-$150^{\circ}C$ the glass reinforced epoxy tube of filament winding. This paper describes the results of a study on the bonded joints of fiber reinforced epoxy tube and cast aluminum. This suggests that surface roughness and glue types play an important role in evaluating of gas sealing capability on the flange and fiber reinforced epoxy tube in the composite hollow bushing.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.558-559
• /
• 2005

Recently, polymer insulators that are used for high voltage applications have some advantages such as light weight, small size, vandalism resistance, hydrophobicity and easy making process. During outdoor service of polymer insulators, the surface of the insulating material is frequently subjected to moisture and contamination that lead to dry band arcing. Their tracking resistance, erosion resistance, end sealing and shed design are very important because dry band arcing causes degradation of polymer surface. In this paper, the tracking property of polymer suspension insulator for power transmission is investigated with CEA tracking wheel test. The diagnosis of insulator sample in tracking test has been analyzed by leakage current, STRI Guide, SEM, FTIR and thermal image.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.329-329
• /
• 2012

알루미늄 합금은 기존에는 경량소재로써 각광을 받아왔지만, 최근에는 다양한 전자 및 기계 부품에서 방열이 크게 대두 됨에 따라 방열 소재로써의 관심이 증가하고 있다. 알루미늄 합금의 고유한 표면처리법인 양극산화에의해 생성되는 산화층의 열전도도에 대한 연구를 실시하였다. 또한, 이들 산화층은 실리이라는 후처리에 의해서 기공구조의 변화가 일어나는데, 이 실링 처리가 열전도도에 미치는 영향에 대해서 확인해 보았다. 양극 산화피막의 미세 기공층이 비어있는 경우에 비해서 실링에 의해서 기공이 산화물 및 수산화물로 채워진 경우 열전도도가 증가하였다. 또한, 산화층의 기공률에 따라서 열전도도가 증가되는 비율의 차이가 발생하였다.