• 제목/요약/키워드: Seal Groove

검색결과 46건 처리시간 0.02초

복합소재 O-링 접합계면의 단열특성에 관한 컴퓨터 시뮬레이션 (Computer Simulation on Insulation Characteristics of Composite Material O-rings)

  • 김청균;김성원;조승현
    • 한국윤활학회:학술대회논문집
    • /
    • 한국윤활학회 2002년도 제35회 춘계학술대회
    • /
    • pp.291-295
    • /
    • 2002
  • O-ring seal is usual component part in various mechanical apparatus for sealing that makes efficient performance of the equipments. The sealing performance of O-ring is affected in environments of the O-rings, like that applied pressure, working temperature, pre-compressed ratio and materials. In this paper, a pressurized, compressed elastomeric bi-polymer O-ring inserted into a rectangular groove is analyzed numerically using the MARC finite element program. The calculated FEM results showed that bi-polymer O-ring that is manufactured by NBR for an inner and FFKM for an outer ring shows a low temperature distribution among various bi-polymer O-ring models. But, the normal contact stress between the flange and upper part of the O-ring is small compared to other bi-polymer model.

  • PDF

브레이크 캘리퍼 내부 검사를 위한 비전시스템 개발 (Development of the Vision System to Inspect the Inside of the Brake Calipers)

  • 권경훈;추형곤;김진영;강준희
    • 센서학회지
    • /
    • 제26권1호
    • /
    • pp.39-43
    • /
    • 2017
  • Development of vision system as a nondestructive evaluation system can be very useful in screening the defective mechanical parts before they are assembled into the final product. Since the tens of thousands of the mechanical parts are used in an automobile carefully inspecting the quality of the mechanical parts is very important to maximize the performance of the automobile. To sort out the defective mechanical parts before they are assembled, auto parts fabrication companies employ various inspection systems. Nondestructive evaluation systems are getting rapidly popular among various inspection systems. In this study, we have developed a vision system to inspect the inside of the brake caliper, a part that is used to compose a brake which is the most important to the safety of the drivers and the passengers. In a brake caliper, a piston is pushed against the brake disk by oil pressure, causing a friction to damp the rotation of the wheel. Inside the caliper, a groove is positioned to adopt an oil seal to prevent the oil leaks. Inspecting the groove with our vision system, we could examine the existence of the contaminants which are normally the residual tiny pieces from the machining process. We used a high resolution GigE camera, 360 degree lens to look in the inside view of the caliper at once, and a special illumination system in this vision system. We used the edge detection technique to successfully detect the contaminants which were in the form of small metal chips. Labview graphical program was used to process the digital data from the camera and to display the vision and the statistics of the contaminants. We were very successful in detecting the contaminants from the various size calipers. We think we are ready to employ this vision system to the caliper production factories.

Deformation Characteristics and Sealing Performance of Metallic O-rings for a Reactor Pressure Vessel

  • Shen, Mingxue;Peng, Xudong;Xie, Linjun;Meng, Xiangkai;Li, Xinggen
    • Nuclear Engineering and Technology
    • /
    • 제48권2호
    • /
    • pp.533-544
    • /
    • 2016
  • This paper provides a reference to determine the seal performance of metallic O-rings for a reactor pressure vessel (RPV). A nonlinear elastic-plastic model of an O-ring was constructed by the finite element method to analyze its intrinsic properties. It is also validated by experiments on scaled samples. The effects of the compression ratio, the geometrical parameters of the O-ring, and the structure parameters of the groove on the flange are discussed in detail. The results showed that the numerical analysis of the O-ring agrees well with the experimental data, the compression ratio has an important role in the distribution and magnitude of contact stress, and a suitable gap between the sidewall and groove can improve the sealing capability of the O-ring. After the optimization of the sealing structure, some key parameters of the O-ring (i.e., compression ratio, cross-section diameter, wall thickness, sidewall gap) have been recommended for application in megakilowatt class nuclear power plants. Furthermore, air tightness and thermal cycling tests were performed to verify the rationality of the finite element method and to reliably evaluate the sealing performance of a RPV.

기계적 피로결함 시험편 제조 및 결함 크기 평가 (Fabrication of Mechanical fatigue flawed Specimen and Evaluation of Flaw Size)

  • 홍재근;김우성;손영호;박반욱
    • 비파괴검사학회지
    • /
    • 제23권1호
    • /
    • pp.38-44
    • /
    • 2003
  • 원자력발전소의 안전성등급 기기에 적용되는 비파괴검사는 실제 결함을 실현한 시험편을 사용하여 결함탐지능력을 검증하도록 하는 기량검증이 요구되고 있다. 가동중인 원전에서 발생 가능한 균열으로는 기계적 피로균열, 열 피로균열 및 입계부식균열 등이 있으나 본 연구에서는 기계적 피로균열을 대상으로 하였다. 인장 피로하중을 사용하여 기계적 피로결함을 제조하기 위해서 시험편을 설계하였고 원하는 피로결함 파면의 조도를 얻기 위해서 인가하중의 크기 및 사이클 수를 조절하여 피로결함을 발생시켰다. 발생된 결함에 대한 정확한 크기와 위치에 대한 물리적 정보를 얻은 후에 결함이 설계된 크기와 위치에 존재하도록 기밀용접을 실시하였다. 기밀용접 후 잔여 용접 흠은 가스 텅스텐 아크용접 및 플럭스 코어드 아크용접으로 채워졌다. 최종 완성된 피로결함 시험편을 방사선투과검사 및 초음파탐상검사를 통하여 검사한 결과, 설계된 길이와 깊이로 피로결함이 형성되었음을 확인하였다.

상아질과 Gutta-Percha에 대한 근관충전용 Sealer의 결합강도의 측정 (MEASUREMENT OF ADHESION OF ROOT CANAL SEALER TO DENTINE AND GUTTA-PERCHA)

  • 허미자;유미경;이세준;이광원
    • Restorative Dentistry and Endodontics
    • /
    • 제28권1호
    • /
    • pp.89-99
    • /
    • 2003
  • The purpose of this study was to investigate the bonding of resin- based root canal sealer, AH26 when the sealer was applied as a thin layer between dentine and gutta-percha surface. In this study forty non-caries extracted human molars and resin-based root canal sealer(AH 26, DeTrey/Dentsply, Germany) were used. Disks of gutta-percha, 6mm in diameter.6mm thick (Diadent/Dentsply, Korea) for thermoplastic obturation were used and dentin surfaces were treated with 2% NaOCl(Group 1) or 2%NaOCl+17% EDTA(Group 3). Disks of gutta-Percha, 6mm in diameter.6mm thick (Diadent/Dentsply, Korea) for conventional obturation were used and dentin surface were treated with 2% NaOCl(Group 2) or 2%NaOCl+17% EDTA(Group 4). Enamel was removed by a horizontal section 1mm below the deepest portion of the central occlusal groove by using a watercooled low speed diamond saw. A second horizontal section was done around cementoenamel junction. Exposed dentin surface was cut to approximately $8{\times}8{\;}mm$ rectangular shape and was ground against 320, 400, 600 grade silicon carbide abrasive paper serially. After grinding, the dentine surface were soaked in a solution of 2% NaOCl for 30 minutes and twenty of specimens were treated with 17% EDTA solution for 1 minute. The treated specimens were washed and dried, Root canal sealer, AH26 was prepared according to the manufacture's instructions The Gutta-percha and dentin surface were coated with a thin layer of the freshly mixed seal or. The specimens were left overnight at room temperature. After their initial set, they were transferred to an incubator at $37$^{\circ}C$ for 72 h. After 72 hours, resin blocks were made. The resin block was serially sectioned vertically into stick of $1{\cdot}1mm$. Twenty sticks were prepared from each group. After that, tensile bond strength f3r each stick was measured with Microtensile Tester Failure patterns of the specimens at the interface between gutta-percha and dentin were observed under the SEM(x1000) and Stereomicroscope (LEICA M42O, Meyer Inst., TX U.S.A) at 1.25 x25 magnification. The results were statistically analysed by using a One-way ANOVA and Tukey's test. The results were as follows; 1. Tensile bond strengths($mean{\pm}SD$) were expressed with ascending order as follows: Group 1, $3.09{\pm}$ 1.05Mpa : Group 2, $6.23{\pm}1.16MPa$ : Group 3, $7.12{\pm}1.07MPa$ : Group 4, $10.32{\pm}2.06MPa$. 2. Tensile bond strengths of the group 2 and 4 used disks of gutta-percha for conventional obturation were significantly higher than that of the group 1 and 3 used fir thermoplastic obturation. (p < 0.05). 3. Tensile bond strengths of the group 3 and 4 treated with 2% NaOC1+17% EDTA were significantly higher than that of the group 1 and 2 treated with 2% NaOCl. (p < 0.05). 4. In analysis of failure patterns at the interface between sealer and gutta-percha, there were observed 49 (61%)cases of adhesive failure patterns and 31 (39%) cases of mixed failures patterns.

1788년 김응환의 봉명사경과 《해악전도첩(海嶽全圖帖)》 (Kim Eung-hwan's Official Excursion for Drawing Scenic Spots in 1788 and his Album of Complete Views of Seas and Mountains)

  • 오다연
    • 미술자료
    • /
    • 제96권
    • /
    • pp.54-88
    • /
    • 2019
  • 《해악전도첩(海嶽全圖帖)》은 금강산과 해금강, 관동팔경을 그린 60점의 실경산수화와 51편의 기문(記文)으로 이루어진 화첩으로 규모와 화풍에 있어 보기 드문 작품이다. 그림의 특징은 화면을 가득 채운 구성과 남종화풍을 따르면서도 거칠고 파격적인 화법, 산석(山石)의 기하학적이고 입체적인 표현 등이다. 1973년의 특별전, '한국미술이천년(韓國美術二千年)'을 처음으로 화첩의 일부만 공개되었던 작품은 2019년 국립중앙박물관 특별전 '우리 강산을 그리다: 화가의 시선, 조선시대 실경산수화'에서 그 전모가 공개되었다. 《해악전도첩》이 김응환(金應煥)(1742~1789)의 작품으로 알려진 것은 화첩의 마지막 장에 쓰여진 관지(款識)와 현재 행방이 묘연한 <칠보대>에 찍힌 '복헌'이라는 도장 때문이었다. 그러나 김응환을 지시하는 관지와 도장은 모두 후대에 더해졌을 가능성이 크다. 본 연구는 화첩을 둘러싼 여러 요소를 고찰하여 제작자를 재검토하는 것을 목적으로 한다. 《해악전도첩》 제작 배경을 이해하기 위해 먼저 18세기 금강산 기행사경도의 전통과 봉명사경을 살펴보았다. 정선(鄭敾)(1676~1759)의 《신묘년풍악도첩(辛卯年楓嶽圖)帖》(1711)을 비롯하여 심사정(沈師正)(1707~1769), 김윤겸(金允謙)(1711~1775), 최북(崔北)(1712~1786 이후), 강세황(姜世晃)(1713~1791) 등은 조선 후기 최고의 여행지였던 금강산을 유람하고 기행사경도를 제작하였다. 화가들은 이전의 전통을 계승하여 내금강의 명승명소를 주로 그렸고, 자신들이 경험한 장소를 새롭게 시각화하였다. 이러한 기행사경도는 여행을 기념하며 동행자나 후원자를 위해 여러 장면을 담을 수 있는 화첩 형식으로 제작되었다. 개별적인 금강산 기행사 경도의 제작이 증가하는 가운데 1788년에 정조(正祖)(재위 1776~1800)가 도화서 화원인 김응환과 김홍도(金弘道)(1745~1806 이후)에게 영동9군과 금강산의 명승(名勝)을 그려오도록 명한 일은 공적 업무였다. 정조는 이들의 관계 및 지방관으로서의 경력, 서로 다른 화풍 등을 고려해 봉명사경의 화원으로 선발하였다. 김응환과 김홍도는 영조(英祖)(재위 1724~1776)조부터 도화서 화원으로 활동하며 선후배이자 동료로서 친밀한 관계를 유지했다. 나아가 이들은 영남 지역의 찰방(察訪)으로서 지방관의 업무를 수행한 경험이 있었다. 두 화원의 화풍은 서로 달라 김홍도는 부드럽고도 섬세하게 필선을 운용한 반면, 김응환은 굳세면서도 울창한 풍치를 잘 표현했다. 두 명의 화원은 각자의 개성으로 봉명사경 기간 동안 100여 폭의 초본을 그렸고, 이를 선별하여 60~70여 폭의 화첩 혹은 두루마리를 완성하였다. 이들의 그림은 18세기 전중반에 내금강과 관동팔경 위주로 제작된 금강산 기행사경도의 전통을 더욱 풍부하게 했고 영동과 외금강의 명승명소를 새롭게 발견하며 소재를 확장시켰다. 현재 《해악전도첩》은 원(元), 형(亨), 이(利), 정(貞) 4책으로 이루어졌는데, 원(元), 형(亨)책은 내금강의 그림 29점이며 이(利)책은 외금강의 장면 17점, 정(貞)책은 해금강과 관동팔경 14점으로 구성되었다. 비단 위에 그려진 각 그림은 기하학적으로 산석을 표현했으며, 연백으로 금강산의 암봉을 흰색 혹은 회청색으로 표현했다. 《해악전도첩》의 구도와 화법은 정선, 강세황, 심사정, 정충엽(鄭忠燁)(1725~1800 이후), 김응환, 김홍도의 화법과 비교할 수 있어 18세기 후반의 시대 양식을 갖는다. 특히 화첩의 일부 그림은 김홍도의 《해동명산도첩(海東名山圖帖)》(1788)과 구성 및 회화적 모티프가 매우 유사하여 두 화첩간의 연관성을 보여준다. 반면에 <영랑호>, <해산정>, <월송정> 등은 김홍도의 그림과는 구별된다. 이를 통해 화가가 김홍도와 영향을 주고받으면서도 자신만의 개성적인 화첩을 제작했음을 추측해 볼 수 있다. 《해악전도첩》에는 다른 화첩에는 등장하지 않는 <자운담>, <백운대>, <안문점망비로봉>, <백정봉> 등이 포함되어 있으며 각 장면마다 경물의 특징을 구체적이고 참신하게 묘사하였다. 특히, 화가는 산석을 기하학적으로 표현하고 선과 면을 도드라지게 하여 입체감을 강조하였다. 그는 남종화풍을 바탕으로 자신만의 화법을 확립했고 이를 자유자재로 운용하면서 화면에 동적인 리듬감을 부여했다. 이처럼 60점의 그림은 거칠고 파격적으로 보이지만 나름의 질서 안에서 일관성을 견지하고 있다. 본고는 화법과 봉명사경의 정황을 종합해 《해악전도첩》의 제작자를 김응환으로 추론하였다. 나아가 김하종(金夏鍾)(1793~1878 이후)의 《풍악권(楓嶽卷)》(1865년 이후)과의 친연성은 《해악전도첩》의 화가를 김응환으로 추정한 또 하나의 이유였다. 《해악전도첩》은 김홍도의 《해산첩》과는 달리 후대에 미친 영향력이 미비한데 김하종의 《풍악권》만이 《해악전도첩》의 소재와 화법을 따르고 있다. 김하종은 《풍악권》에서 50년 전, 춘천부사 이광문(李光文)(1778~1838)을 위해 제작한 《해산도첩》(1816)과는 전혀 다른 화법을 구사했다. 그는 김응환의 《해악전도첩》과 유사한 구성과 회화적 요소, 화보식 인물표현을 따르면서 사의적인 분위기를 강조하였다. 개성김씨의 일원이자 김응환의 종손인 김하종은 가문에 전해지는 《해악전도첩》류의 그림을 감상했고 이를 새롭게 번안했다고 추측된다. 화첩에 포함된 51편의 기문은 그림 다음 장에서 그려진 장소를 설명하고 있어 각 그림을 이해하고 감상하는 데 도움을 준다. 기문은 그림과 밀접한 관계를 가지며 앞의 장소로부터의 이동 정보, 이름의 유래, 지형적 특징, 관련 정보 등이 서술되었다. 이와 같은 백과사전식 혹은 지리지와 같은 기문은 19세기 전반에 나타나기 시작했으며, 금강산 화첩류에 더해졌다. 《해악전도첩》의 백화암 기문에는 1845년의 암자에 대한 중건 내용이 기록되어, 기문의 연대를 추정하는 중요한 근거가 되었다. 김하종에게 《풍악권》을 주문한 이유원(李裕元)(1814~1888)도 각 그림에 글을 붙였는데 이 글들은 김응환의 화첩에 포함된 기문 51편과 내용 및 서술방식이 흡사하다. 이유원의 기문은 《해악전도첩》의 기문이나 그 초고(원본)와 관련성이 높지만 두 화첩의 기문 필사의 선후관계를 판정하는 데에는 좀더 면밀한 검토가 필요하다. 《해악전도첩》은 김홍도의 봉명사경 초본 및 김홍도의 영향으로 제작된 19세기의 금강산 화첩과는 구별된다. 이 화첩은 화원 김응환의 회화세계를 이해할 수 있는 지평을 넓히고 18세기 후반 실경산수화의 또 다른 층위를 보여주고 있어 중요한 의미를 갖는다.