• Journal of the Society of Naval Architects of Korea
• /
• v.41 no.6
• /
• pp.102-113
• /
• 2004

A name of 'Sea Ship' and 'River Ship' had been used based on the comprehension for the difference of ship's hull form in Chosun period. We can find a number of literature describing the situation which transferred the cargo from Sea Ship to River Ship because Sea Ship could not go upstream in the river of which the current is fast and the water depth is low. The reason why Sea Ship could not go upstream was that the bottom of Sea Ship was narrow, it means the non-flat bottom. Generally Sea Ship had short length, wide breadth, so L/B of 2.2∼3.0, and high draft and depth. River Ship has long length, narrow breadth, so L/B of 5.0∼6.3, and low draft and the flat bottom in order to adapt to the low water depth of the river.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1997.10a
• /
• pp.175-183
• /
• 1997

The Jiao Guan Ship was a sea ship, used by Zhang Baogao, the Silla great sea merchant, in the marine trade with china during the 8th cetury A.D. and the 9th century A.D. Studying on the Ship type of the Jiao Guan Ship is the urgent problem to be solved, in the sphere of learning abuot the history of communication between China and Korea. The authors take the initial probe into this subject , by researching Zhang Baogao's marie activities, and point out that the Jiao Guan Ship's original type should be the Sha Ship which was the sea ship sailing the sea in northern China , in the tang Dynasty. At the same time, the authors estimate the constructions and equipment of the ship.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.6 no.2
• /
• pp.431-441
• /
• 2014

The effects of hull-girder vibration on the fatigue strength of a Post-Panamax container ship are discussed in the present paper. Firstly, the short-term sea states are categorized according to the occurrence probability of each sea state. Time histories of hull-girder stress in short-term sea states are calculated by means of a nonlinear simulation code of ship response assuming that the hull-girder is rigid and flexible. Then, the calculated stress peaks are processed by the rainflow counting method, where two different counting procedures are used based on the considerations of crack propagation behaviors. Finally, the fatigue damage in life time of the ship in each categorized short-term sea state is estimated by means of Miner's rule. Based on the calculated results, the effects of hull-girder vibrations on the fatigue damage are clarified by disaggregated damage from short-term sea state.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.11a
• /
• pp.248-255
• /
• 2018

Deep-sea fishing vessel No. 501 Oryong was fully flooded through the openings and was sunk down to the bottom of sea due to the very rough sea weather on the way of evasion after fishing operation in the Bearing Sea with many crews dead and/or missed. In this study, calculation of ship stability was carried out using KST-SHIP(ship calculation system of KST), considering the effect of flow fluid and fish catch arrangement according to the progress of its sinking accident, and damage stability was analyzed. For this study, intact stability calculation of its accident ship under the full load departure condition and its calculation result were verified by comparing with each other, and intact stability according to displacement from the departure of accident ship just before the accident was calculated and analyzed. Damage stability was calculated according to the progress during sinking accident and also analyzed.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.10 no.1 s.20
• /
• pp.35-40
• /
• 2004

Ship can not sail without water. Ships sail along different routes with different natural conditions. Thus ships sailing at different sea areas have their respective characteristics. The northern sea area and the southern one of China have different characteristics, that is to song, the sea in the northern area is shallow and that in the southern area is deep, Chinese ships developed into different types in order to adapt to this.

• Journal of Fisheries and Marine Sciences Education
• /
• v.12 no.2
• /
• pp.199-212
• /
• 2000

It is very important to investigate the hull response of a fishing vessel in the sea to ensure the safe navigation and fishing operation in rough sea by preserving excellent sea keeping qualities. For this purpose, the author measured various responses of three stem trawlers in waves using real sea experimental measuring system. The author analyzed the experimental data using the statistical and spectral analyzing method to get the characteristics of the motion responses of the vessels according to the wave height and the ship's speed. The results obtained can be summarized as follows ; (1) Rather higher response of the pitch motion due to the wave height appeared in the head sea and the bow sea than any other wave direction without relevance to ship's size. In case of the roll motion, the beam sea and the quartering sea have a high response value. The period of peak of the pitch motion and the roll motion according to the wave height in each vessel has almost same value respectively. (2) The change of response of the pitch motions deeply depend on the ship's speed in the head sea and the bow sea, but not in the other wave direction. (3) The change of response of the roll motions in the beam sea, the quartering sea and the following sea are affected by the influence of the ship's speed in 5k't to 8k't, but not related to the ship's speed in out of that range.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2000.06a
• /
• pp.205-218
• /
• 2000

Hull forms of Jiao Yi Ship for shipping and foreign trade in Silla and Tang Dynasty were transformed and developed in accordance to their voyage and rational routes. The trade ship was a sea ship, used by Chang Po Go's, the Silla great sea merchant ship, in the marine trade with China during the 8th and 9th century. It is not easy to presume the hull type and trade formal of Chang Po Go's Jiao Yi Ship of the 8th and 9th Century. Studying on the ship type of the trade ship is the urgent problem to be solved, in the sphere of leaning about the history of communication between China and Korea. The authors take the initial prove into this subjects, by researching Chang Po Go's marine activities, and point out that the trade ship's original type should be the Sha Ship which was the sea ship sailing th sea in northern China, in the Tang Dynasty. This study aims to present materials concerning hull forms of Chang Po Go's Jian Yi Ship by analysing ancient voyage history, foreign trade history, and ship history of Silla, Tang and Japan during the 8th and 9th century.

• Journal of the Korean Institute of Navigation
• /
• v.20 no.1
• /
• pp.11-26
• /
• 1996

On this paper, the traditional methods for the measurement of ship's maneuverabilities during the sea-trial of newly built ship are summarized and new methods for the same measurement using Integrated Navigation System and GPS are introduced. After various sea-trials of training ship "HANNARA" which are equipped with modern INS and GPS system, the results are compared and analysed. The purpose of this paper is to present more accurate methods of measurement of ship's maneuverabilities during sea-trial using INS and GPS which are gradually becoming the basic navigational equipments on many newly constructed vessels.d vessels.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.41 no.3
• /
• pp.227-233
• /
• 2005

In order to estimate the effective horse power(EHP) in towing net of a bottom trawl ship, the ship's resistance was calculated by using a series data of Yamagata and Wigley formula. Also the effective horse power for a ship(EHPs) was estimated versus the ship speed in sailing and the propulsive efficiency was calculated with the brake horse power and the effective horse power. Then the effective horse power for a ship and a trawl net were estimated in the application of the propulsive efficiency in towing net. The total effective horse power($EHP_T$) was average 187.6kW and the effective horse power for a 1.awl net($EHP_n$) was average 176.7kW at a smooth sea state in towing net. The ratio of $EHP_n$ to $EHP_T$ was about 94.0% and the value was higher slightly than was already informed at a smooth sea state. The power for keeping up a townet speed was required more about 20% of a maximum continuous power at a rather rough sea state than a smooth sea state. In the future, if the residual resistance is considered with a sea state, $EHP_n$ will be estimated more correctly Also the data of EHP estimated by this method will be used as the basic data to design a trawl net.

• Journal of the Society of Naval Architects of Korea
• /
• v.53 no.6
• /
• pp.521-528
• /
• 2016

The surface of a naval ship emits infrared signature because it is mainly heated by the sun. In order to reduce infrared signature, it has been practiced to cool surface of the naval ship by using sea water. In this study, reduction effect of infrared signature was compared according to the parameters which affect emission of infrared signature in order to increase utility of sea water cooling. The analysis results by searching parameters, which can judge operation of sea water cooling, could be utilized as basic data for operation of the naval ship.