• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.3
• /
• pp.1-7
• /
• 2018

A combustion test for a supersonic combustor was conducted using a direct-connected type supersonic combustor test facility. The facility was verified for the capability of simulating required flow conditions. The test condition was maintained at Mach 2.0, $915^{\circ}C$ and 496 kPa for 15 s. Using gaseous hydrogen as the fuel, the combustor model was also tested for its ignition and flame holding capability at the fuel equivalence ratio of 0.12. Combustion efficiency was 71%, and the supersonic flow regime was obtained at this test condition.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.5
• /
• pp.72-81
• /
• 2011

In order to understand the operation characteristics and major design parameters of a dual combustion ramjet engine, a fundamental analysis model based on gasdynamics and thermodynamic theories was established. The preliminary performance analysis was accomplished and the results clearly describe the intimate relationship between air inlets, gas generator, and supersonic combustor. The methodology presented provides a means for quantitatively determining the geometries of the gas generator and supersonic combustor and assessing the effects on performance of each of the engine components. Also the design results for a basic configuration were provided.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.289-292
• /
• 2007

Performance of a dual mode ramjet engine based on the sensitivity analysis of design parameters (the gap between cowl and inlet spike and combustor length) was analyzed from the view points of aerodynamics and thermodynamics. A dual mode engine performing from supersonic to hypersonic (Mach no. 2 to 6) was designed in a proposed flight envelop. The design method and result were comparable to the results of the previous study, Hyperion RLV, and the CFD calculation.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.14 no.1
• /
• pp.65-78
• /
• 2010

DARPA carries out several R&D programs for hypersonic vehicles to maintain the U.S. military superiority in air and space. Falcon program is the core of the DARPA's activitiy for the hypersonics including the long-term step-by-step approach from HTV-1, HTV-2, HTV-3X to HCV. Hypersonic Turbo-Based Combined Cycle (TBCC) engine technologies research and development programs, HiSTED, FaCET and Vulcan, are also the parts of their activities. Present article presents the summarized review on the backgrounds, technologies and relationships of those programs.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.3
• /
• pp.56-66
• /
• 2013

Weight reduction of the VTHL / TSTO type of the reusable launch vehicles using RBCC engines are investigated. To predict weight and thrust of the vehicles, equations of motion are analyzed. Analysis results are compared with specifications of existing launch vehicles for validations. For the mission of inserting 2.5 ton payload to 200 km circular orbit, the case A, which uses the RBCC engine in the 1st stage shows smaller weight than the case B, which uses the RBCC engine in the 2nd stage. The weight of the case A shows only 25.8% of a existing rocket launch vehicle's weight.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.318-325
• /
• 2011

In order to understand the operation characteristics and major design parameters of a dual combustion ramjet engine, a fundamental analysis model based on gasdynamics and thermodynamic theories was established. The preliminary performance analysis was accomplished and the results clearly describe the intimate relationship between air inlets, gas generator, and supersonic combustor. The methodology presented provides a means for quantitatively determining the geometries of the gas generator and supersonic combustor and assessing the effects on performance of each of the engine components. Also the design results for a basic configuration were provided.

• Advances in aircraft and spacecraft science
• /
• v.5 no.4
• /
• pp.431-444
• /
• 2018

Numerical simulations have been conducted to study the unstart/restart characteristics of an over-under turbine-based combined-cycle propulsion system (TBCC) inlet during the inlet transition phase. A dual-solution area exists according to the Kantrowitz theory, in which the inlet states may be different even with the same input parameters. The entire transition process was divided into five stages and the unstart/restart hysteresis loop for each stage was also obtained. These loops construct a hysteresis surface which separates the operating space of the engine into three parts: in which a) inlet can maintain a started state; b) inlet keeps an unstarted state; c) inlet state depends on its initial state. During the transition, the operation of the engine follows a certain order with different backpressures and splitter angles, namely control route, which may result in disparate inlet states. Nine control routes with different backpressures and transition stages were designed to illuminate the route-dependent behavior of the inlet. The control routes operating towards the unstart boundary can make the inlet transit from a started state into an unstarted one. But operating backward the same route cannot make the inlet restart, additional effort should be made.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.6
• /
• pp.37-46
• /
• 2018

A design study on the cooling channel configuration in a regeneratively cooled supersonic combustor was performed. The flow parameters on the hot- and cold-side channels were calculated using a quasi-one-dimensional model. The heat transfer between these two sides was estimated as a part of the flow calculation. For the reference configuration, the total amount of heat exchanged was 10.7 kW, the heat flux was $566kW/m^2$, and the fuel temperature increase between the inlet and outlet was 153 K. Seven designs of the heat exchanger channel were compared for their heat transfer performance.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.93-98
• /
• 2007

The air velocity flowing in inner combustion chamber of SCramjet is supersonic and the time of its stay is very short as a few milliseconds. Within this short time, fuel injection， air-fuel mixing, and combustion process should be accomplished. Several methods are suggested for mixing enhancement. Among these, cavity is selected to study for mixing characteristics. The numerical simulation is performed in the case of freestream Mach number of 2.5 and cavity located in front of fuel jet injection. 3 different sized cavities of the same length-height ratio were used in order to recognize the effect about cavity size. Also, the case without cavity was analyzed to find the effect of cavity. Used code compared with the result of experiment under identical conditions and it was verified. Through this comparison and verification, mixing enhancement by cavity size could be confirmed.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.3
• /
• pp.243-256
• /
• 2015

As a part of the R&D efforts for the hypersonic vehicles, various flight test programs has been carried out using small launch vehicles or sounding rockets. Australian HyShot program is a representative case of the flight test program for scramjet engines carried by international collaborations. A number of hypersonic flight test programs has followed in a similar way. In USA, Falcon HTV-2 was carried by DARPA, X-51A by AFRL and HyFly by ONR. HyCAUSE and HIFiRE were carried in collaboration with Australia. In France, LEA program is on the way similarly to X-51A. Russia, China and India seems like carrying out flight test programs for the development of hypersonic defense system. The goals, technical elements, the status and the relation between the programs were summarized in this paper as a reference for the similar program of the country in the future.