• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.4
• /
• pp.345-358
• /
• 2018

The high altitude scientific balloon has been used for decades in advanced aerospace countries such as United States, France, and Japan to carry out various research objectives. Since the initial cost for development and operation is enormous, it has been conducted by national research institutes. Recently, the advent of open source software/hardware ecosystems with low-cost yet high-performance have lowered barriers to enter into scientific balloon research and development. In this study, a zero pressure balloon prototype was designed considering the cost, usability, compatibility, and development period by using commercial off the shelf (COTS) items. In addition, the flight operation experience was accumulated through eight times of the flight tests, and operational reliability of the balloon system was verified. Finally, the foundation for the operation of the large zero pressure balloon was established.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.1
• /
• pp.49-58
• /
• 2019

The Scientific balloon is a flight system that could recover an entire platform at the end of the mission. The recovery takes place mainly in low-density populated areas, taking into account for the possible damage to the human life and public safety. In Republic of Korea, on the other hand, marine recovery should be considered due to the dense mountainous terrain and restrictions of the peninsula. In this operating environment, the envelope must be recovered because of severe marine pollution that may occur after the splashdown. Therefore, in this study, the separation device that consists of a location tracker and the waterproof system were developed. The device includes data transmission/reception, separation, and waterproof systems which are manufactured considering the environmental condition of the Korea. The performance of the device and the trajectory of the envelope were verified by conducting a separation test of a 20km platform at a target altitude and the recovery of the zero-pressure balloon.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.8 no.2
• /
• pp.137-142
• /
• 2005

Purpose: To evaluate the safety, efficacy and technical problems of the endoscopic balloon dilatation of esophageal anomalies in children. Methods: The medical records of 8 children treated by endoscopic balloon dilatation for esophageal anomalies over a 10-year period at Pusan National University Hospital were reviewed retrospectively. The balloon catheter (Maxforce TTS or CRE, Boston Scientific Co., USA) was positioned across the area of narrowing by direct visualization. The balloon was slowly inflated with normal saline to specified pressures for each balloon and maintained for 60 seconds and then deflated. After 60 seconds pause, the procedure was repeated with a larger sized balloon (increments of 1 mm for each subsequent dilation) till effective dilatation was confirmed by direct visualization without complications. Results: Three male and five female were included and their mean age was 4.2 years. A total of 27 (average of 3.2 per patient) dilatation were performed. Underlying diseases of patients are postoperative stricture of esophageal atresia in 3 cases, esophageal ring in 2 cases, achalasia, corrosive esophagitis and hypertensive LES in one case respectively. The size of initial dilating balloon was chosen on the basis of the diameter of the narrowing determined by endoscopy. The first dilation in patients with severe esophageal stricture was made with a 6 mm sized balloon. Complications observed were esophageal perforation and respiratory holding during the procedure in one case respectively. Successful outcome was seen in 6 patients (75%). Conclusion: Endoscopic balloon dilatation can provide a safe and effective mean of treating esophageal anomalies in children and should be considered the treatment of choice in the initial management of those cases.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.2
• /
• pp.57.2-57.2
• /
• 2019

BITSE is a balloon mission, which is a solar coronagraph to measure speed and temperature of the solar wind using 4 different wavelength filters and an pixelated polarization camera. KASI and NASA jointly designed, developed, and tested the solar coronagraph. Mainly KASI developed an imaging system and a control system, and NASA developed an optical system and mechanical structures. We mount the BITSE on Wallops Arc-Second Pointer (WASP) of Wallops Flight Facility, and launch it with a 39 mcf balloon of Columbia Scientific Ballon Facility. We will introduce the overall system of the BITSE.

• The Korean Journal of Pain
• /
• v.8 no.1
• /
• pp.25-30
• /
• 1995

Anlgesic agents against visceral pain typically rely on a noxious chemical irritation of the peritoneum, e. g., acetic acid and phenylquinone writhing test. While useful, this type of assay depends upon an acute inflammation and the release of local alogens. Further, ethical and scientific constraints prevent repeated assessments in a single animal, thereby compounding the difficulty of assessing tolerance development to analgesic agents. To overcome these constraints, Colburn et al. developed a model for mechanical visceral pain model (VPM) based on a repeatable and reversible duodenal distention in the rat. A chronic indwelling intraduodenal balloon catheter is well tolerated and upon inflation produces a writhing response graded in proportion to distention. This response is inhibited by morphine in a dose dependent manner. We found that a model for visceral pain was thought to be a great value.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.85.1-85.1
• /
• 2011

The magnetic field at the surface of the Sun is concentrated in magnetic features that often have spatial extents of 100 km or less. The study of the fine scale structure of the Sun's magnetic field has been hampered by the limited spatial resolution of the available observations. This has recently changed thanks to various new high-resolution facilities, among them the SUNRISE observatory, built around the largest solar telescope to leave the ground, and containing two science instruments. SUNRISE successfully had its first long-duration science flight on a stratospheric balloon in June 2009 and a host of scientific results have been obtained from the data. After a brief introduction to the Sunrise mission, an overview of selected results obtained so far will be given. A reflight at higher solar activity is currently being prepared.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.3
• /
• pp.79-86
• /
• 2006

In this paper, we implement the ad ballon control system in which a built camera monitors using bluetooth wireless communication with ISM(Industrial. Scientific and Medical) band. In the proposed system. the driving time of ad ballon is increased by adopting the mercury battery and light weight. An ad ballon with camera is easily controlled by Graphic User Interface using Linux based embedded system.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.2
• /
• pp.57.4-57.4
• /
• 2019

BITSE is a project of balloon-borne experiments for a next-generation solar coronagraph developed by a collaboration with KASI and NASA. The coronagraph is built to observe the linearly polarized brightness of solar corona with a polarization camera, a filter wheel, and an aperture door. For the observation, the coronagraph is supported by the power distribution unit (PDU), a pointing system WASP (Wallops Arc-Second Pointer), telemetry & telecommand system SIP (Support Instrument Package) which are developed at NASA's Goddard Space Flight Center, Wallops Flight Facility, and Columbia Scientific Balloon Facility. The BITSE Command and Data Handling (C&DH) system used a cost-off-the-shelf electronics to process all data sent and received by the coronagraph, including the support system operation by RS232/422, USB3, Ethernet, and digital and analog signals. The flight software is developed using the core Flight System (cFS) which is a reusable software framework and set of reusable software applications which take advantage of a rich heritage of successful space mission of NASA. The flight software can process encoding and decoding data, control the subsystems, and provide observation autonomy. We developed a python-based testing framework to improve software reliability. The flight software development is one of the crucial contributions of KASI and an important milestone for the next project which is developing a solar coronagraph to be installed at International Space Station.

• Journal of English Language & Literature
• /
• v.56 no.5
• /
• pp.947-971
• /
• 2010

Anna Letitia Barbauld's poem "Washing-Day" (1797) has sparked a variety of feminist critical endeavors over the past two decades. While many feminist literary critics try to salvage the poem as a successful tongue-in-cheek riposte directed at the male dominant literary world, more rigorous Marxist feminists accuse Barbauld of being limited by her own middle-class woman's view on women's domestic labor. Legitimate as they may be, these readings fail to elucidate Barbauld's place in a larger literary and intellectual discourse during the eighteenth century. In this paper I read "Washing-Day" as a woman's georgic, a genre or mode concerned with agricultural labor, the public value of which was highly recognized in eighteenth-century England. Alluding to canonical texts by writers like Shakespeare, Milton, and Pope, Barbauld's "loaded lines" in mock-heroic form create a space in which the women's domestic labor of washing interrupts men's daily routines and disrupts their poetic assumptions. While she makes women's work visible, Barbauld also addresses its quintessential nature. Women's work is affective labor; women have to labor physically and mentally to produce the desired domestic comfort. By allowing the image of the soap "bubble" to echo with many "bubbles" in other writers' texts, from the soap bubbles the narrator used to play with as a child to the hot-air balloon "bubble" of the Montgolfier brothers, Barbauld pleasantly equates work and day-dreaming, men's toil and children's play, and finally public, scientific, and recognized labor and private, domestic, and imaginative activities.

• Journal of The Korean Astronomical Society
• /
• v.53 no.4
• /
• pp.87-98
• /
• 2020

The Korea Astronomy and Space Science Institute (KASI) has been developing a next-generation coronagraph (NGC) in cooperation with NASA to measure the coronal electron density, temperature, and speed simultaneously, using four different optical filters around 400 nm. KASI organized an expedition to demonstrate the coronagraph measurement scheme and the instrumental technology during the 2017 total solar eclipse (TSE) across the USA. The observation site was in Jackson Hole, Wyoming, USA. We built an eclipse observation system, the Diagnostic Coronal Experiment (DICE), composed of two identical telescopes to improve the signal-to-noise ratio. The observation was conducted at four wavelengths and three linear polarization directions in the limited total eclipse time of about 140 seconds. We successfully obtained polarization data for the corona but we were not able to obtain information on the coronal electron temperature and speed due to the low signal-to-noise ratio of the optical system and strong emission from prominences located at the western limb. In this study, we report the development of DICE and the observation results from the eclipse expedition. TSE observation and analysis with our self-developed instrument showed that a coronagraph needs to be designed carefully to achieve its scientific purpose. We gained valuable experience for future follow-up NASA-KASI joint missions: the Balloon-borne Investigation of the Temperature and Speed of Electrons in the Corona (BITSE) and the COronal Diagnostic EXperiment (CODEX).