• Korean Journal of Heritage: History & Science
• /
• v.46 no.3
• /
• pp.134-149
• /
• 2013

The Sudang-ri Site in Geumsan is considered the historic site where Baekje dominated the inland traffic route to Gaya through Geumsan and Jinan in the 5th Century. This study identified the production techniques of iron by conducting an analysis of metallographical microstructure of the artifacts such as an iron sword and an iron sickle that were excavated in Sudang-ri Site, Geumsan, one of the regions ruled by Baekje, and tried to figure out the characteristics and the technical systems of Baekje's ironmaking around the 5th Century by comparing them with other iron artifacts produced around the same time. The analysis showed that various production techniques were applied to the artifacts excavated in Sudang-ri Site, Geumsan. Depending on the production techniques, they can be divided largely into three methods: the simple shape-forging method, the steel manufacture method after forging, and the steel manufacture & heat-treatment method after forging. The iron sickle from the stone chamber tomb No. 1, which was produced only through forging, is mostly composed of soft ferrite at both edges of the blade and at the rear making the use of the weapon impractical. From this fact, it is presumed that they were produced as burial objects or ceremonial accessories for the person buried. The iron axe from the outer stone coffin tomb No. 1 and the iron swords and sickle from the outer stone coffin tomb No. 12, which were produced through the steel manufacture method after forging such as carburizing, did not go through the heat treatment such as quenching, but applied different production processes to each part. Therefore, it is deemed that they were produced as daily tools for cultivation rather than burial objects or ceremonial accessories. The production techniques following the forging process - carburizing and heat treatment - can be found on the iron swords from the outer stone coffin tomb No. 5 and the outer stone coffin tomb No. 12. The sturdy structure of the blade part and the durable structure of the rear processed with heat are deemed to have been produced as weaponry and used by the person buried. Based on the analysis of the iron artifacts excavated from Sudang-ri Site in Geumsan, the characteristics of iron production techniques were investigated by comparing them with the artifacts from Yongwon-ri Site in Cheonan, Bongseon-ri Site in Seocheon, and Bujang-ri Site in Seosan that were made around the same time as the cluster of Baekje tombs examined by the metallographical microstructure analysis of this study. For the iron artifacts analyzed here, the changes in the techniques were investigated using the iron swords common in all of the tombs. In the case of the iron swords, it was identified the heat treatment technique called tempering was applied from the 4th Century.

• Analytical Science and Technology
• /
• v.20 no.3
• /
• pp.227-236
• /
• 2007

This study was carried out to estimate the contents of heavy metals (Hg, Pb, and Cd) in seaweeds (n=169) which are closely related to food resources. The contents of heavy metals in the laver were found as follows; Hg was highly detected in the east coastal area ($0.0509{\pm}0.0635mg/kg$), Pb in the south coastal area ($0.0509{\pm}0.0635mg/kg$), Cd in the south coastal area ($1.3785{\pm}0.7754mg/kg$). In the sea mustard, Hg was highly detected in the south coastal area ($0.0152{\pm}0.0116mg/kg$), Pb in the east coastal area ($0.1633{\pm}0.2888mg/kg$), Cd in the south coastal area ($0.7141{\pm}0.4952mg/kg$). In the sea tangle, Hg was highly detected in the south coastal area ($0.0177{\pm}0.0118mg/kg$), Pb in the east coastal area ($0.0728{\pm}0.1025mg/kg$), Cd in the south coastal area ($0.1640{\pm}0.1253mg/kg$). In the sea lettuce, Hg, Pb, and Cd were highly detected from the west coastal area. In the fusiforme, Hg and Cd were highly in the west coastal area, Pb in the south coastal area. In general brown algae showed the highest level of Hg, Pb, and green algae showed the highest level of Cd Additionally, the significant correlation was observed between Hg and Cd (r=0.513, p<0.01), between Cd and Pb (r=0.420, p<0.05). The weekly average intakes of Hg, Pb and Cd from seaweeds takes about 0.17~10.30 % of PTWI (Provisional Tolerable Weekly Intakes) that FAO/WHO Joint Food Additive and Contaminants Committee has set to evaluate their safeties.

• Journal of the Korean Chemical Society
• /
• v.37 no.2
• /
• pp.237-243
• /
• 1993

The primary and secondary structure of the 5S rRNA isolated from Xanthomonas celebensis were determined by enzymatic and chemical degradation methods. It consists of 119 nucleotides and contains no modified nucleosides. As with the 5S rRNAs of X. maltophilia and X. citri, it contains an additional uridine residue on the 5'-terminus. Its secondary structure was almost identical to the models previously proposed by us for the 5S rRNA of two Xanthomonas species. Its secondary structure consists of five helices, five loops and two bulges. The tertiary interactions in the 5S rRNA molecule were analyzed by Fe(II)-EDTA treatment and hybridization method using deoxyhexamer. From the fact that some adenine residues in loop M, region $I_1-C$, loop $H_1$, and loop $H_2$ become susceptible to diethylpyrocarbonate when the 5S rRNA was hybridized with deoxyhexamer complementary to the sequence $U_{35}CCCAU_{40}$ and that some nucleotide residues in loop M, loop $H_1$ and region $D-I_2$ become resistant Fe(II)-EDTA cleavage in the presence of $Mg^{2+}$, it is presumed that loops $H_1$ and $H_2$ interact with loop M in some way. In the tertiary interaction, the regions $I_1-C$ and $D-I_2$ seem to act as hinges in folding the stems $B-I_1-C$ and $D-I_2-E.$ It was found that loop $H_1$ changes into a smaller loop of three bases by forming noncanonical A : C base-pairs ih acidic environment.

• Korean Journal of Environmental Agriculture
• /
• v.24 no.2
• /
• pp.83-90
• /
• 2005

This study was conducted to evaluate the influence of pollutant loads on the water quality in the Mankyeong River from January 2002 to December 2004. The BOD level in upstream ranged from 0.58 to 1.57 mg $L^{-1}$, which would be in I grade according to water quality criteria by Ministry of Environment but BOD level in midstream and downstream was III grade. T-N contents were high in midstream and the average T-P level ranged from 0.06 to 2.70 mg $L^{-1}$. The point raw loads of BOD was high in Iksancheon, Mokcheonpo and Cheongha basin. The point raw loads of T-N and T-P were high in Iksancheon and Cheongha watershed. The non-point low loads of BOD were 3,931 kg $day^{-1}$, 2,870 kg $day^{-1}$ and 2,827 kg $day^{-1}$ in Mokcheonpo, Top and Jeonju watershed, respectively. The major source of BOD effluent load was population, that of T-N and T-P effluent loads was livestock. The delivered load of T-N were high in Jeonju, Mokcheonpo, Gosan, Iksancheon watershed in order. The delivered load of T-N was high in Jeonju watershed and that of T-P was high in Jeonju and Iksancheon watershed. The delivery ratio of BOD and T-N at dry season were below 100% except Mokcheonpo watershed. The delivery ratio of BOD and T-N at raining season were high in Gosan watershed.

• Food Science and Preservation
• /
• v.21 no.1
• /
• pp.62-68
• /
• 2014

This study was performed in order to investigate the functional components of 5 kinds of marine algae. We have collected 5 samples of marine algae, such as the sea mustard (Undaria pinnatifida), sea tangle (Laminaria iaponice), sea weed fusiforme (Hizikia fusiforme), green laver (Entetomotpha), laver (Phophyratenera), which have been harvested in Jeollanam-do. In order to examine the functional effects, 5 kinds of marine algae were extracted with hot water ($80^{\circ}C$, 4 hr), ethanol and methanol (R.T., 4 hr), and subcritical water extract (SWE, 3 MPa, $90^{\circ}C$, $150^{\circ}C$, $210^{\circ}C$). A higher yield of extract was obtained through SWE method (3 MPa, $210^{\circ}C$) in all of the samples obtained. The highest total sugar content was 427.4 mg/g in green laver extracted with SWE (3 MPa, $210^{\circ}C$). The content of the SWE total phenolic compounds was higher than that of the water and solvent (methanol, ethanol) extracts. The anti-oxidative activities of the extracts from 5 kinds of marine algae were examined through the DPPH radical scavenging activity test. The SWE (3 MPa, $150^{\circ}C$ and $210^{\circ}C$) of the marine algae was the highest among all of the extracts. As per the results, the SWE of the marine algae contained more functional components and it had a higher antioxidant activity than those of the other extracts. The $IC_{50}$ value of tyrosinase in seaweed fusiforme and laver were higher than those of the other samples. These results strongly support the possible use of marine algae as functional materials.

• Journal of Intelligence and Information Systems
• /
• v.22 no.4
• /
• pp.69-85
• /
• 2016

Successful relationship with loving partners is one of the most important factors in life. In psychology, there have been some previous researches studying the factors influencing romantic relationships. However, most of these researches were performed based on statistical analysis; thus they have limitations in analyzing complex non-linear relationships or rules based reasoning. This research analyzes commitment and persistence in heterosexual involvement according to styles of loving using a datamining technique as well as statistical methods. In this research, we consider six different styles of loving - 'eros', 'ludus', 'stroge', 'pragma', 'mania' and 'agape' which influence romantic relationships between lovers, besides the factors suggested by the previous researches. These six types of love are defined by Lee (1977) as follows: 'eros' is romantic, passionate love; 'ludus' is a game-playing or uncommitted love; 'storge' is a slow developing, friendship-based love; 'pragma' is a pragmatic, practical, mutually beneficial relationship; 'mania' is an obsessive or possessive love and, lastly, 'agape' is a gentle, caring, giving type of love, brotherly love, not concerned with the self. In order to do this research, data from 105 heterosexual couples were collected. Using the data, a linear regression method was first performed to find out the important factors associated with a commitment to partners. The result shows that 'satisfaction', 'eros' and 'agape' are significant factors associated with the commitment level for both male and female. Interestingly, in male cases, 'agape' has a greater effect on commitment than 'eros'. On the other hand, in female cases, 'eros' is a more significant factor than 'agape' to commitment. In addition to that, 'investment' of the male is also crucial factor for male commitment. Next, decision tree analysis was performed to find out the characteristics of high commitment couples and low commitment couples. In order to build decision tree models in this experiment, 'decision tree' operator in the datamining tool, Rapid Miner was used. The experimental result shows that males having a high satisfaction level in relationship show a high commitment level. However, even though a male may not have a high satisfaction level, if he has made a lot of financial or mental investment in relationship, and his partner shows him a certain amount of 'agape', then he also shows a high commitment level to the female. In the case of female, a women having a high 'eros' and 'satisfaction' level shows a high commitment level. Otherwise, even though a female may not have a high satisfaction level, if her partner shows a certain amount of 'mania' then the female also shows a high commitment level. Finally, this research built a prediction model to establish whether the relationship will persist or break up using a decision tree. The result shows that the most important factor influencing to the break up is a 'narcissistic tendency' of the male. In addition to that, 'satisfaction', 'investment' and 'mania' of both male and female also affect a break up. Interestingly, while the 'mania' level of a male works positively to maintain the relationship, that of a female has a negative influence. The contribution of this research is adopting a new technique of analysis using a datamining method for psychology. In addition, the results of this research can provide useful advice to couples for building a harmonious relationship with each other. This research has several limitations. First, the experimental data was sampled based on oversampling technique to balance the size of each classes. Thus, it has a limitation of evaluating performances of the predictive models objectively. Second, the result data, whether the relationship persists of not, was collected relatively in short periods - 6 months after the initial data collection. Lastly, most of the respondents of the survey is in their 20's. In order to get more general results, we would like to extend this research to general populations.

• Journal of Intelligence and Information Systems
• /
• v.18 no.2
• /
• pp.177-192
• /
• 2012

This is a study of match-making systems that considers the mutual satisfaction of matching partners. Recently, recommendation systems have been applied to people recommendation, such as recommending new friends, employees, or dating partners. One of the prominent domain areas is match-making systems that recommend suitable dating partners to customers. A match-making system, however, is different from a product recommender system. First, a match-making system needs to satisfy the recommended partners as well as the customer, whereas a product recommender system only needs to satisfy the customer. Second, match-making systems need to include as many participants in a matching pool as possible for their recommendation results, even with unpopular customers. In other words, recommendations should not be focused only on a limited number of popular people; unpopular people should also be listed on someone else's matching results. In product recommender systems, it is acceptable to recommend the same popular items to many customers, since these items can easily be additionally supplied. However, in match-making systems, there are only a few popular people, and they may become overburdened with too many recommendations. Also, a successful match could cause a customer to drop out of the matching pool. Thus, match-making systems should provide recommendation services equally to all customers without favoring popular customers. The suggested match-making system, called Mutually Beneficial Matching (MBM), considers the reciprocal satisfaction of both the customer and the matched partner and also considers the number of customers who are excluded in the matching. A brief outline of the MBM method is as follows: First, it collects a customer's profile information, his/her preferable dating partner's profile information and the weights that he/she considers important when selecting dating partners. Then, it calculates the preference score of a customer to certain potential dating partners on the basis of the difference between them. The preference score of a certain partner to a customer is also calculated in this way. After that, the mutual preference score is produced by the two preference values calculated in the previous step using the proposed formula in this study. The proposed formula reflects the symmetry of preferences as well as their quantities. Finally, the MBM method recommends the top N partners having high mutual preference scores to a customer. The prototype of the suggested MBM system is implemented by JAVA and applied to an artificial dataset that is based on real survey results from major match-making companies in Korea. The results of the MBM method are compared with those of the other two conventional methods: Preference-Based Matching (PBM), which only considers a customer's preferences, and Arithmetic Mean-Based Matching (AMM), which considers the preferences of both the customer and the partner (although it does not reflect their symmetry in the matching results). We perform the comparisons in terms of criteria such as average preference of the matching partners, average symmetry, and the number of people who are excluded from the matching results by changing the number of recommendations to 5, 10, 15, 20, and 25. The results show that in many cases, the suggested MBM method produces average preferences and symmetries that are significantly higher than those of the PBM and AMM methods. Moreover, in every case, MBM produces a smaller pool of excluded people than those of the PBM method.

• Analytical Science and Technology
• /
• v.28 no.6
• /
• pp.417-424
• /
• 2015

In this study, the relationship between selenoprotein concentrations in blood and stomach cancer have been searched for Korean. The concentration of each selenoprotein in blood serum was analyzed and the correlation between the concentration and stomach cancer was studied to find a potential for using Selenium as a biomarker. In concentration determination, a simple calibration curve method was used with the monitoring of m/z 78 without the use of solid phase extraction. This is a lot more simple than the method using SPE with post column isotope dilution. The result obtained from the analysis of CRM BCR-637, 72.20±3.35 ng·g⁻¹, showed similar value of reference value (81±7 ng·g⁻¹). The total concentration of Se for the controlled group, cardiovascular patients group, was 105.70±21.20 ng·g⁻¹. This value was the same as normal healthy person reported earlier. Each selenoprotein concentration of GPx, SelP and SeAlb was 26.12±7.84, 65.15±14.50, 14.43±6.99 ng·g⁻¹, respectively. The distribution of each selenoprotein was 24.7%, 61.6%, and 13.7%, which was similar to the normal person. The result of stomach cancer patients, the total concentration of Se was 76.11±28.12 ng·g⁻¹ and each concentration of GPx, SelP and SeAlb was 15.41±9.01, 50.83±17.91, and 9.87±5.21 ng·g⁻¹, respectively. The total and each selenoprotein concentration level showed significant decrease for the stomach cancer patients. The level of decrease was 41.0% for GPx, 22.0% for SelP, and 31.6% for SeAlb. However, the distribution of each selenoprotein was not much different. Either total Selenium or each selenoprotein could be used as a possible index for the diagnosis of cancer. However, in age group study, it is shown that young age group (30's-40's) did not show much difference.

• Journal of Mushroom
• /
• v.16 no.2
• /
• pp.111-117
• /
• 2018

This study was conducted to compare the composition and antioxidant activity of 1- and 2-year-old Poria cocos Wolf cultivated at a mortuary and cemetery. An elemental analyzer test showed oxygen, carbon, hydrogen, nitrogen, and sulfur to be present at concentrations of 45~46%, 39~41%, 6.06~6.1%, 0.21~0.22%, and 0%, respectively. No differences in composition were observed among samples. Eleven minerals (S, Ca, Mg, P, As, Se, Cu, Fe, Pb, Zn, and Cd) found in P. cocos cultivated at the mortuary and cemetery were analyzed by inductively coupled plasma mass spectrometry (ICP). The levels of S, Fe, Mg, and Zn in P. cocos were higher in cemetery-cultivated samples than in mortuary-cultivated samples. A 1,1-diphenyl-2-picrylhydrazyl (DPPH) assay for antioxidant activity revealed half-maximal inhibitory concentration ($IC_{50}$)values of P. cocos to be 8.601 mg/mL (mortuary, 1 year old), 12.85 mg/mL (cemetery, 1 year old), 1.23 mg/mL (mortuary, 2 years old), and 1.18 mg/mL (landfill, 1 year old). A 2,2'-azino-bis-3-ethylbenzothiazoline-6-sulfonic acid (ABTS) assay revealed $IC_{50}$ values of 15.85 mg/mL (mortuary, 1 year old),14.59 mg/mL(cemetery, 1 year old), 3.9 mg/mL (mortuary, 2 years old), and 14.92 mg/mL (cemetery, 1 year old). The results showed a concentration-dependent effect. Two-year-old mortuary-cultivated P. cocos had the highest antioxidant activity among samples. Ultrastructure analysis with a field emission scanning electron microscope (FE-SEM) showed no obvious differences among samples.

• Applied Chemistry for Engineering
• /
• v.7 no.5
• /
• pp.877-887
• /
• 1996

The ideal membranes for membrane-covered oxygen probes system should be selectively permeable for oxygen and chemically inert, and have good mechanical strength. Polysulfone(PSf) was selected to develop the membrane for membrane-covered oxygen electrodes system. PSf membranes have properties such as good reproducibility, good mechanical strength, chemical inertness, and high heat resistance. PSf membranes were cast from polymer solution on the glass plate at constant temperature, and casting solvents used were tetrahydrofuran(THF), methylene chloride, and N-methyl-2-pyrrolidone(NMP). Tricresyl phosphate(TCP) as plasicizer was added to PSf to increase the softness of membrane. The permeation characteristics were observed for pure oxygen and nitrogen through pure PSf membranes by variable volume method and membrane-covered electrode system. The permeability coefficients of oxygen and nitrogen measured by variable volume method were slightly decreased with increasing of upstream pressure. The permeation properties of PSf membrane using methylene choride as casting solvent were not affected by the PSf amount of polymer solution. The permeability coefficients of oxygen and nitrogen for PSf membrane containing TCP were very slightly lower than those for pure PSf membrane, but ideal separation factors were slightly higher. The flexibility of PSf membrane containing 2wt% TCP was better than that of pure PSf membrane. It was expected that this increase in flexibility would solve the difficulty of fixing the membrane to the cathode. The membrane-covered oxygen probes system was composed of anode, cathode and electrolyte. The type of the anode was Ag/AgCl half-cell, that of cathode was Ag, and the electrolyte was 4N KCl solution. The result of sampled current voltametry for PSf membrane showed the plateu region at -0.3V~-1.0V. The correlation coefficient of oxygen partial pressure versus current for PSf membrane was relatively high, 0.99949. It was concluded that PSf membrane was the good candidate for the membrane-covered oxygen probes system.