• Journal of Korea Multimedia Society
• /
• v.24 no.11
• /
• pp.1518-1525
• /
• 2021

Due to the growth of VR industry and rise of digital twin industry, the importance of implementing 3D data same as real space is increasing. However, the fact that it requires expertise personnel and huge amount of time is a problem. In this paper, we propose a system that generates point cloud data with same shape and color as a real space, just by scanning the space. The proposed system integrates 3D geometric information from lidar and color information from stereo camera into one point cloud. Since the number of 3D points generated by lidar is not enough to express a real space with good quality, some of the pixels of 2D image generated by camera are mapped to the correct 3D coordinate to increase the number of points. Additionally, to minimize the capacity, overlapping points are filtered out so that only one point exists in the same 3D coordinates. Finally, 6DoF pose information generated from lidar point cloud is replaced with the one generated from camera image to position the points to a more accurate place. Experimental results show that the proposed system easily and quickly generates point clouds very similar to the scanned space.

• Journal of electromagnetic engineering and science
• /
• v.12 no.1
• /
• pp.55-62
• /
• 2012

Humanitarian demining is very important issue not only in mine affected courtiers but also for the courtiers which are technically, politically and financially supporting the mine affected courtiers. In order to achieve higher efficiency of the mine clearance operation, new technologies can significantly contribute to the societies. Since 2002, Tohoku University, Japan has developed a sensor system "ALIS" for humanitarian demining. ALIS is a hand-held dual sensor, which combines an electromagnetic induction sensor (EMI) and a Ground Penetrating Radar (GPR). ALIS has a real-time sensor tracking system based on a CCD camera and which enables the image reconstruction. We have tested ALIS in Cambodia and found that it can eliminate more than 70 % metal fragments. Since 2009, 2 sets of ALIS have detected more than 80 anti-personnel mines, and cleared more than 137,000 $m^2$ in Cambodia.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.3 no.2
• /
• pp.75-90
• /
• 1978

The objective of this paper is to demonstrate how System Dynamics Approach may be used to develop new ways of analyzing and projecting manpower requirements and resources. For this purpose, a System Dynamics Model is presented as an example. An examination of the model will show that a System Dynamics modeling approach is an innovative and useful tool for manpower policy analysis and planning. Second, with minor modifications, the model may be used for manpower policy analysis and planning for any skilled personnel in Korea. For example, a similar model nay be built for engineers to analyze the effects of alternative policies about engineering education, sur as the number of available places in the various institutions of training, scholarships and loans, and the duration of training. An engineer's model may also be used to make the projections of the supply and requirements of engineers in the future according to various alternative assumptions where each assumption represents a policy option.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2005.05a
• /
• pp.97-100
• /
• 2005

현재 육군에 복무중인 46여만 명의 병에 대한 입대부터 전역까지 개인의 변동 자력을 관리하고 있는 야전제대 인사관리 시스템은 인사명령권 부대별 단독 PC 시스템에서 D / B를 운영하는 Off-Line 방식으로 상 하 부대간 연동이 되지 않아 잦은 병적 착오와 자료의 신뢰성 및 최신 자료유지에 제한이 있다. 따라서 병적변동의 근거가 되는 인사명령과 연동이 되고 인사명령 발령과 동시에 육군의 병적DB가 변동되는 on-line방식의 병적관리시스템 구축이 절실하다. 본 논문에서는 기존의 야전제대 인사관리 시스템을 보완하는 Web 환경에서의 육군의 병 인사관리시스템 구성 및 설계방안을 제안하였다.

• Journal of Practical Engineering Education
• /
• v.15 no.2
• /
• pp.259-271
• /
• 2023

The purpose of this study is to prepare a plan to activate vocational training through a company-customized qualification system that meets the needs of the industry and responds promptly to changes in the external environment and trends. The BRIDGE 3.0 model was presented as Establishment of qualification system based on education and training result certification, a customized qualification operation system based on local companies by setting the qualification system as a strategy centered on companies that are consumers. To this end, the current status and limitations of vocational competency development projects, the current status and limitations of the domestic qualification system, government policies related to vocational competency development, FGI of corporate personnel managers, surveys of personnel managers of SME, expert advice.

• Journal of the Korean Society of Radiology
• /
• v.8 no.3
• /
• pp.117-121
• /
• 2014

The understanding of medical knowledge regarding cardiac shape and cardiovascular system is essentially required for a medical personnel as well as a medical technician. Correct acquisition of medical knowledge through cardiac miniature model is very critical because it is directly related to a patient life. therefore replica model is necessary for the education regarding cardiac and cardiovascular system. In this study anatomical cardiovascular system on fluoroscopy can be shown by cardiac and cardiovascular fluoroscopy replica model. Also, it helps to understand a cardiovascular radiograph. Consequentially medical personnel and medical technician are able to take advantage of this equipment to understand cardiovascular fluoroscopy system.

• International conference on construction engineering and project management
• /
• 2020.12a
• /
• pp.96-102
• /
• 2020

The construction industry remains serious accidents, injuries, and fatalities due to it's unique, dynamic, and temporary nature. On workplace sites, Safety pre-task planning is one of the efforts to minimize injuries and help construction personnel to identify potential hazards. However, the working conditions are complicated. Many activities, including tasks or job steps, are executing at the same time and place. It may lead to an increase in the risks from simultaneous tasks. This paper contributes to addressing this issue by introducing a safety risk interaction analyzing framework. To accomplish this objective, accident reports of the Occupational Safety and Health Administration (OSHA) are investigated. The pairs of task incompatibility, which have time-space conflicts and lead to incidents, are found. Ontology technology is applied to build the risk database, in which the information is acquired, structuralized. The proposed system is expected to improve pre-task planning efficiency and relieve the burdens encountered by safety managers. A user scenario is also discussed to demonstrate how the ontology supports pre-task planning in practice.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.8
• /
• pp.3842-3861
• /
• 2019

In cut throat competition, organizations all over the world try to utilize the immense opportunities the Internet has to offer in almost all of their operations. Today, Social networking sites (SNSs) provide utilities designed to help companies to recruit right personnel. Considering the implication of social media for recruitment at infancy stage in Pakistan and lack of studies related to it, this study aims to investigate the role of different SNSs qualities (Easily navigate, Secure process, Eminence Proficiency, Candidate's Attraction and Network Expedition) in effective E-recruitment (EER). Data were collected through structured questionnaire from employees and managers of major telecom companies of Pakistan. Finally, the result of 355 returned and valid questionnaire with 55% response rate show that the relationship between SNSs qualities and EER is significant. Moreover, results also prove that EER is better than the tradition recruitment and a SNSs comparison show that Facebook is more effective than LinkedIn for EER. The results of this study will help Pakistani companies to develop a successful e-HRM and EER strategy in the current scenario.

• Korean Management Science Review
• /
• v.34 no.1
• /
• pp.27-45
• /
• 2017

The purpose of this study is to empirically analyze whether open innovation activities are significant and which methods are more effective in developing new businesses. Based on the latest technological innovation survey data of the Science and Technology Policy Institute, the results were analyzed by binary logistic regression analysis. As a result of the analysis, we confirmed that open innovation activities have a positive effect on the performance of developing new businesses. In the open innovation activities, Recruitment (invitation) of specialist in related fields, Business alliance technical agreement, Dispatch of personnel, M&A, Acquisitions identify related field trends showed more influence in order. It would be beneficial to improve the performance of developing new businesses with a low probability of success if utilize more effective innovation activities in developing new business in enterprises or organizations throughout this study.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.27 no.4
• /
• pp.457-465
• /
• 2024

The Remote Control Munition System is a anti-personnel munitions system to replace land mines that are hard to retrieve and can inflict damage on friendly forces and civilians. As operating environments and methods change, quality improvement is necessary to ensure appropriate durability. Therefore, corrosion resistance evaluation was performed according to the surface treatment of ALDC12, the main assembly material. We conduct the potentiodynamic polarization, cyclic corrosion test to perform analysis on corrosion behavior. Additionally, we try to observe the pitting on the surface through SEM analysis. In conclusion, among the three surface treatments, Anodizing surface treatment is judged to be the most suitable for corrosion durability in a field environment.