• Journal of Drive and Control
• /
• v.21 no.2
• /
• pp.44-52
• /
• 2024

In this study, we predicted PTO power requirements based on torque predicted by the discrete element method and the multi-body dynamics coupling method. Six different scenarios were simulated to predict PTO power requirements in different soil conditions. The first scenario was a tillage operation on cohesionless soil, and the field was modeled using the Hertz-Mindlin contact model. In the second through sixth scenarios, tillage operations were performed on viscous soils, and the field was represented by the Hertz-Mindlin + JKR model for cohesion. To check the influence of surface energy, a parameter to reproduce cohesion, on the power requirement, a simple regression analysis was performed. The significance and appropriateness of the regression model were checked and found to be acceptable. The study findings are expected to be used in design optimization studies of agricultural machinery by predicting power requirements using the discrete element method and the multi-body dynamics coupling method and analyzing the effect of soil cohesion on the power requirement.

• Current Optics and Photonics
• /
• v.8 no.4
• /
• pp.406-415
• /
• 2024

The major error factors that degrade the efficiency of coherent beam combining (CBC) are numerically studied in a comprehensive manner, paying particular attention to phase, tip-tilt, polarization angle, and beam quality. The power in the bucket (PIB), normalized to the zero-error PIB, is used as a figure of merit to quantify the effect of each error factor. To maintain a normalized PIB greater than or equal to 95% in a 3-channel CBC configuration, the errors in phase, tip-tilt, and polarization angle should be less than 1.06 radians, 1.25 ㎛, and 1.06 radians respectively, when each of the three parameters is calculated independently with the other two set to zero. In a worst-case scenario of the composite errors within the parameter range for the independent-95%-normalized-PIB condition, the aggregate effect would reduce the normalized PIB to 83.8%. It is noteworthy that the PIB performances of a CBC system, depending on phase and polarization-angle errors, share the same characteristic feature. A statistical approach for each error factor is also introduced, to assess a CBC system with an extended number of channels. The impact of the laser's beam-quality factor M² on the combining efficiency is also analyzed, based on a super-Gaussian beam. When M² increases from 1 to 1.3, the normalized PIB is reduced by 2.6%, 11.8%, 12.8%, and 13.2% for a single-channel configuration and 3-, 7-, and 19-channel CBC configurations respectively. This comprehensive numerical study is expected to pave the way for advances in the evaluation and design of multichannel CBC systems and other related applications.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.7
• /
• pp.1342-1354
• /
• 2016

As Internet, and hardware technology are in rapid process, using rate and penetration rate of Internet of Things are increasing. Internet of Things is the physical objects with network which embedded with electronics, software, sensors, and network. Smart Home-kit to operate refrigerators, washing machines, light bulbs, and such internet of things by a smartphone has been realized. However, it is difficult to use a good quality of software based on IoT. It is because that the study related to quality evaluation of software based on IoT is deficient compared with increase amount of IoT devices. Software based on IoT includes mobility, transportability, real time accessibility and hardware characteristics. Therefore, it is necessary to have differentiated quality standards and quality model. Software quality evaluation model for IoT is proposed to satisfy these needs. Evaluation model is mapped by characteristics of IoT software based on ISO/IEC 25000's quality characteristics. Scenario based studies were applied to quality model for verification.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.5
• /
• pp.150-166
• /
• 2020

Based on the theory of cognitive reserve, we undertook this study to develop a cognitive function training program for woman in menopausal transition with complaints of declining in cognitive function. The program was established by applying the analysis, design, and development stages of the network-based instructional system designed by Jung. The cognitive function training program developed by us is an was an 8-week program composed of cognitive and video training using a mobile application. The program consists of 24 sessions, each with 20-30 minutes of duration, to be completed 3 sessions per week. The contents of the cognitive function training comprise of memory, attention, language function, and scenario-based problem-solving for executive functions, all of which are cognitive areas found to be the most vulnerable for menopausal women. The educational contents were developed for eight subject areas, one subject area per week, including the definition of menopause, its causes and symptoms, menopause and brain function, etc. During the pilot test, the cognitive function training program was applied to 10 menopausal women who complained of cognitive function decline. The results indicated that, after eight weeks of training, the overall cognitive function of participants increased, revealing statistically significant differences (t=-3.04, p=.014) after the program was completed. The mobile app-based cognitive function training program might not only improve patients' memory functions but also potentially reduce the incidence of dementia.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.6
• /
• pp.69-76
• /
• 2015

Although traffic information has been actively analyzed using big data, it has not been used as much with the consideration of driver characteristics. Among the various types of information, road signs can directly affect the driver. Road signs must provide the optimal information that enables drivers to reach their destinations with ease as well as information suitable for navigation systems. However, present road sign rules provide standardized information, regardless of the road type or size. This study suggests a method for providing road information that will help drivers determine their behavior. First, the minimum character size that can be used on a road sign for each design speed was obtained with respect to the visibility and decipherability of a road sign. Instead of conventional diagram-based direction guidance, a scenario using split-based direction guidance was created. To verify the effectiveness of the provided information, a three-dimensional simulated road environment was constructed, and a driving simulator was used for the test. At a simple plane intersection, the driver was not greatly influenced by directional guidance, but at a complex, three-dimensional intersection, the driver preferred summary-based directional guidance, which is instinctive guidance, over diagram-based guidance. On the basis of the test results, a secondary verification test that applied split-based guidance at a three-dimensional intersection confirmed that the driver had no problems in making decisions.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.3
• /
• pp.149-162
• /
• 2020

This paper applied components of experience-based communication in terms of experience theory of Burnd H. Schmitt and context-based communication in the messenger platform environment through the scenario-based survey method, in order to study the influence of individual experiences, shared experiences, ubiquitous connectivity, and contextual usefulness on the perceived value and use intention of chatbot. Through this, the study is to provide companies in various service industries with practical approaches to further promote the use of chatbot. The implications of this study are as follows. First, as most chatbots still do not exceed the human planning level of designing them, it is necessary to consider how to design individual experience elements functionally according to the customer's intention to speak when developing the chatbot. Second, the chatbot should be designed not only from the perspective of completing specific tasks at any real time in anywhere, but also from the overall perspective of enhancing the quality of interaction, including the situation to which the customer belongs. Third, since the chatbot is likely to be anthropomorphized by users, it is important to be cautious about determining the chatbot's 'persona' and 'tone and manner' when developing the chatbot. Customer satisfaction is the most important criterion for the success of chatbot development. In other words, the quality of planning and data rather than the quality of artificial intelligence algorithms determines the utilization of chatbot. This is why companies are trying to make interactions with chatbot as close as possible to human interactions.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.6
• /
• pp.1143-1149
• /
• 2023

The purpose of this study was to the effects of case-based learning (CBL) on problem solving ability and academic self-efficacy in nursing students and was a quasi-experimental study with a one-group pretest-posttest design. The subjects of this study were 121 grade 4 students, and the data collection period was from Aprill 24 to June 12, 2023. The research procedure was scenario development, preliminary investigation, application of case-based learning classes, and follow-up investigation, and the CBL was conducted for 2 weeks, 50 minutes per week. The general characteristics of the subjects were obtained by frequency, percentage, mean, and standard deviation and the effects of CBL on problem solving ability and academic self-efficacy was tested using a paired t-test. The results of this study showed that nursing students' problem solving ability (t=-5.70, p<.001) and academic self-efficacy (t=-3.25, p<.002) improved after applying CBL compared to before applying it. We suggest the use of case-based learning as a strategy to improve problem-solving skills and academic self-efficacy in nursing education. In the future, follow-up research is needed to verify the effectiveness by developing and applying step-by-step clinical cases at an appropriate level according to the learning content of nursing major subjects by grade.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.53-61
• /
• 2017

Recently, there has been an increase in the number of web-based three-dimensional (3D) printing-related service platforms, which allow consumers to collect 3D modeling data, make requests for production, and receive goods through a distribution service using the service platform. The application of 3D printing technology has been expanded to the construction field, yet no guidelines for the related service platform or operation examples can be found. Therefore, the functions of 10 web-based 3D printing service platforms actively used in other industries were investigated and analyzed in this study, and the analysis results were used as a guideline to develop a 3D printing service platform for the construction industry. In addition, the design, construction and distribution services to be equipped with the construction 3D printing service integration platform were presented by creating the driving scenario of the platform. As 3D printing technology develops, the overall construction and architectural paradigms for design, construction and distribution will change. To prepare for such changes and to pioneer the digital construction market in the future, the role of the 3D printing service platform is expected to increase continually.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.59 no.1
• /
• pp.81-96
• /
• 2017

Along with climate change, it is reported that the scale and the frequency of extreme climate events (e.g. heavy rain, typhoon, etc.) show unstable tendency of increase. In case of Korea, also, the frequency of heavy rainfall shows increasing tendency, thus causing natural disaster damage in downtown and agricultural areas by rainfall that exceeds the design criteria of hydraulic structures. In order to minimize natural disaster damage, it is necessary to analyze how extreme precipitation event changes under climate change. Therefore a new design criteria based on non-stationarity frequency analysis is needed to consider a tendency of future extreme precipitation event and to prepare countermeasures to climate change. And a quantitative and objective characteristic analysis could be a key to preparing countermeasures to climate change impact. In this study, non-stationarity frequency analysis was performed and inundation risk indices developed by 4 inundation characteristics (e.g. inundation area, inundation depth, inundation duration, and inundation radius) were assessed. The study results showed that future probable rainfall could exceed the existing design criteria of hydraulic structures (rivers of state: 100yr-200yr, river banks: 50yr-100yr) reaching over 500yr frequency probable rainfall of the past. Inundation characteristics showed higher value in the future compared to the past, especially in sections with tributary stream inflow. Also, the inundation risk indices were estimated as 0.14 for the past period of 1973-2015, and 0.25, 0.29, 1.27 for the future period of 2016-2040, 2041-2070, 2071-2100, respectively. The study findings are expected to be used as a basis to analyze future inundation damage and to establish management solutions for rivers with inundation risks.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.8B
• /
• pp.637-646
• /
• 2012

Recently, Wireless Sensor Networks (WSNs) are used in many applications. When sensor nodes are deployed on special areas, where humans have any difficulties to get in, the nodes form network topology themselves. By using the sensor nodes, users are able to obtain environmental information. Due to the lack of the battery capability, sensor nodes should be efficiently managed with energy consumption in WSNs. In specific applications (e.g. in intrusion detections), intruders tend to occur unexpectedly. For the energy efficiency in the applications, an appropriate algorithm is strongly required. In this paper, we propose tree-based routing algorithm for the specific applications, which based on the intrusion detection. In addition, In order to decrease traffic density, the proposed algorithm provides enhanced method considering link cost and load balance, and it establishes efficient links amongst the sensor nodes. Simultaneously, by using the proposed scheme, parent and child nodes are (re-)defined. Furthermore, efficient routing table management facilitates to improve energy efficiency especially in the limited power source. In order to apply a realistic military environment, in this paper, we design three scenarios according to an intruder's moving direction; (1) the intruder is passing along a path where sensor nodes have been already deployed. (2) the intruders are crossing the path. (3) the intruders, who are moving as (1)'s scenario, are certainly deviating from the middle of the path. In conclusion, through the simulation results, we obtain the performance results in terms of latency and energy consumption, and analyze them. Finally, we validate our algorithm is highly able to adapt on such the application environments.