• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.487-488
• /
• 2011

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.423-423
• /
• 2012

Recently, many researchers made progress in various studies improving the efficiency of dye-sensitized solar cell. In this paper, we used glass textured by wet-chemical etching process for improvement of photocurrent density in dye-sensitized solar cells. This is owing to increase coefficient of light utilization. Consequently, DSSC using the textured glass exhibit a Jsc of 9.49 mA/$cm^2$, a Voc of 0.73 V and a fill factor (FF) of 0.67 with an overall conversion efficiency of 4.64. This result showed increasing of 20% current density and 16% conversion efficiency using the textured glass. These results suggested that glass texturing was very effective in controlling the light-scattering properties into the photovoltaic cell.

• 한국진공학회지
• /
• 제22권3호
• /
• pp.144-149
• /
• 2013

단일 벽 탄소 나노튜브(SWNT)의 열전도도를 구하기 위해서 메모리함수에 Kubo 등식을 사용하였다. 계산 과정에서 나타나는 발산의 문제를 해결하기 위해 전파인자는 연속 분수과정으로 전개하였다. 이러한 계산에서 메모리함수는 지금까지 제시된 다른 이론들 보다 많은 상호작용의 효과를 고려할 수 있다. SWNT에서 20 K 이하의 저온 영역은 온도의 증가에 따라 열전도도가 증가하며, (9,0) 보다 (10,0)이 다소 큰 값을 가지는데 이는 포논의 평균자유행로 $l_{ph}$가 직경의 크기와 관계 있음을 알 수 있다. 그리고 20 K 이상의 고온 영역에서는 비열이 거의 일정한 값을 가지므로 Umklapp 과정에 의해 열전도도는 감소하면서 최대값을 보이고, SWNT의 직경이 증가할수록 최대값의 위치도 고온 쪽으로 이동하는 것으로 조사되었다.

• Journal of Mechanical Science and Technology
• /
• 제16권9호
• /
• pp.1112-1120
• /
• 2002

Numerical investigations on air staging and fuel staging were carried out with a newly designed coaxial cyclone combustor, which uses the method of two stage coal combustion composed of pre-combustor and main combustor. The pre-combustor with a high air/fuel ratio is designed to supply gas at high temperature to the main combustor. To avoid local high temperature region in this process, secondary air is injected in the downstream. Together with the burned gas supplied from the pre-combustor and the preheated air directly injected into main combustor, coals supplied through the main burner react rapidly at a low air/fuel ratio. Strong swirling motion of cyclone combustor keeps the wall temperature high, which makes slagging combustion possible. Alaska, US coal is used for calculations. Predictions were made for various coal flow rates in the main combustor for fuel staging and for the various flow rate of secondary air in the pre-combustor for air staging. In-scattering angles are also chosen as a variable to increase residence times of coal particles. Temperature fields and particle trajectories for various conditions are described. Predicted temperature variations at the wall of the combustor are compared with corresponding experimental data and show a similar trend. The in-scattering angle of 20° is recommended to increase the combustion efficiency in the main chamber.

• 대한의용생체공학회:의공학회지
• /
• 제37권4호
• /
• pp.147-151
• /
• 2016

Tibial defect, or fracture is very routine musculoskeletal case which brings fully uncomfortable and painful situations to patient. Moreover, it has long hospitalization period because of its risk of non-union. There are many studies using ultrasound, vibration, and laser for bone regeneration to figure out fast bone healing. Among them, Low Level Laser Therapy (LLLT) is already known that it is very easy to treat and may have positive effect for bone regeneration. However, LLLT has uncertain energy dose because of scattering and absorption of laser in tissue. In this study, we used interstitial LLLT to treat tibial defect in animal study. The Interstitial LLLT can overcome some limitations caused by laser scattering or absorption in tissue medium. The results were evaluated using u-CT which can calculate X-ray attenuation coefficient and bone volume of bone defect area. These results showed that interstitial LLLT may affect fast bone healing process in early phase.

• 한국정밀공학회지
• /
• 제21권10호
• /
• pp.78-85
• /
• 2004

The particle amount monitoring technique using ultrasound is proposed to determine the proper maintenance time of the filter in the supply process of pure gas in the unit of oxygen plant. There are advantages that it is adaptable in high temperature and high pressure, and it is not disturbed by being exposed in the gas flow, and it can be implemented very economically. The applicability of the ultrasonic technique is pre-studied through the theoretical analysis for the dependency of attenuation of ultrasonic wave on the particles in the gas flow. For the purpose, absorption, scattering and dispersion models are considered, and the attenuation by absorption and the change rate of the propagation speed are calculated fur the specific range of particle size and the ultrasonic wave frequency. It was expected by simulation that the absorptive attenuation by particles was the most sensitive to the change of particle amount. The experimental result showed high correspondence with the theoretical expectation so that this ultrasound attenuation measurement was proved to be highly effective for monitoring the amount of floating particles in the gas flow.

• 한국광학회지
• /
• 제5권1호
• /
• pp.37-44
• /
• 1994

유도 브릴루앙 반사광을 고출력 레이저에 응용할 때 요구되는 반사광 특성이 실험적으로 조사되었다. 집속 렌즈의 초점거리에 따른 유도 브릴루앙 반사광의 peak power 반사율과 위상공액도가 측정되었다. 또한 반사광 가운데 펄스압축된 부분만의 위상공액도가 측정되었다. 초점거리가 긴 경우(f=100cm) 반사광의 peak power가 입사광의 약 2배에 이르렀다. 이때 반사광 중에서 압축된 선두펄스만의 위상공액도는 약 90%로 다른 시간의 펄스보다 위상공액도가 우수했다. 공간적으로는 유도 브릴루앙 이득이 가장 큰 광축부분의 바사관이 최대의 펄스압축, peak power 반사율, 위상공액도를 보여서 유도 브릴루앙 산란을 응용할 때 가장 유용한 부분으로 확인되었다.

• 한국응용과학기술학회지
• /
• 제12권2호
• /
• pp.29-39
• /
• 1995

The phase separated structure and the electro-optical properties of the (polymer/liquid) crystal : LC) composite film strongly depended on the weight fraction of LC in it. The continuous LC phase was formed in a three-dimensional polymer network when the LC weight fraction was above 40wt%. The aggregation structure of the composite film could be controlled by controlling the solvent evaporation velocity during the film preparation process. The smaller LC domains or channels were formed in the case of the faster solvent evaporation velocity. The composite film exhibited reversible light scattering-light transmission switching upon electric field -OFF and -ON states, respectiverly. The light scattering properties of the composite film strongly depended on the spatial distortion of the nematic directors as well as the mismatch in refractive indices between matrix polymer and LC.

• 전기전자학회논문지
• /
• 제24권1호
• /
• pp.140-146
• /
• 2020

We investigated light extraction film based on polymer dispersed liquid crystal (PDLC) for application in organic light emitting diodes (OLEDs). At least 30 seconds of direct UV irradiation process for curing PDLC film on a bottom-emitting OLEDs was successfully achieved without damage on the intrinsic properties of the OLED. We demonstrated that high haze and transmittance can be tuned simultaneously by controlling the UV curing time. By adding PDLC as an external layer without any additional treatment, the light scattering and extraction is increased. Consequently, a PDLC scattering film with 89.8% and 59.9 of total transmittance and haze respectively, achieved about 16% of light intensity enhancement from integrating sphere measurement.

• 한국음향학회지
• /
• 제15권4호
• /
• pp.18-23
• /
• 1996

산란강도의 변동에 따른 통계적 특성은 능동소나의 성능에 영향을 미칠 뿐만 아니라, 주요 산란과정을 이해하는 측면에서 매우 중요하다. 본 논문에서는 천해에서 측정한 해저면 후방산란 신호의 통계적 특성 분석에 대한 내용을 기술하였다. 천천히 움직이는 30kHz의 실험용 소나로 해저면에 대한 자료를 수집하였다. 신호의 진폭변화에 대한 시${\cdot}$공간 상관함수를 계산하였다. 또한, 넓은 빔과 좁은 빔 신호의 포락선에대한 분포함수와 오경보 확률을 계산하고, 이론 모델과 비교를 시도하였다. 분석 결과에서 이동음원에 의한 해저면 후방산란 변동의 통계적 특성은 고정된 음원의 경우와 다른 특징을 나타냈다.